[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAPDyKFri+vsC9U7hhPukgWR2sRec5M0i8XtmyA7dVgJ-8Ewe_A@mail.gmail.com>
Date: Wed, 17 Sep 2025 16:32:30 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Duje Mihanović <dujemihanovic32@...il.com>
Cc: Michael Turquette <mturquette@...libre.com>, Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
David Wronek <david@...nlining.org>, Karel Balej <balejk@...fyz.cz>, phone-devel@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht, linux-arm-kernel@...ts.infradead.org,
linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pm@...r.kernel.org,
Duje Mihanović <duje@...emihanovic.xyz>
Subject: Re: [PATCH v4 0/4] Marvell PXA1908 power domains
On Sat, 13 Sept 2025 at 23:16, Duje Mihanović <dujemihanovic32@...il.com> wrote:
>
> Hello,
>
> This series implements support for the power domains found in Marvell's
> PXA1908 SoC. The domains control power for the graphics, video and image
> processors along with the DSI PHY.
>
> Signed-off-by: Duje Mihanović <duje@...emihanovic.xyz>
> ---
> Changes in v4:
> - Address maintainer comments
> - Rebase on v6.17-rc5
> - Link to v3: https://lore.kernel.org/r/20250829-pxa1908-genpd-v3-0-2aacaaaca271@dujemihanovic.xyz
>
> Changes in v3:
> - Move driver back to pmdomain subsystem
> - Instantiate using auxiliary bus
> - Small fixes and refactors
> - Rebase on v6.17-rc3
> - Link to v2: https://lore.kernel.org/r/20250821-pxa1908-genpd-v2-0-eba413edd526@dujemihanovic.xyz
>
> Changes in v2:
> - Move driver to clk subsystem (domains are instantiated by clock
> driver)
> - Drop power controller schema
> - Drop RFC prefix
> - Rebase on v6.17-rc2
> - Link to v1: https://lore.kernel.org/r/20250806-pxa1908-genpd-v1-0-16409309fc72@dujemihanovic.xyz
>
> ---
> Duje Mihanović (4):
> dt-bindings: clock: marvell,pxa1908: Add syscon compatible to apmu
> pmdomain: marvell: Add PXA1908 power domains
> clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
> arm64: dts: marvell: pxa1908: Add power domains
>
> .../devicetree/bindings/clock/marvell,pxa1908.yaml | 30 ++-
> MAINTAINERS | 4 +
> .../marvell/mmp/pxa1908-samsung-coreprimevelte.dts | 1 +
> arch/arm64/boot/dts/marvell/mmp/pxa1908.dtsi | 5 +-
> drivers/clk/Kconfig | 1 +
> drivers/clk/mmp/Kconfig | 10 +
> drivers/clk/mmp/Makefile | 5 +-
> drivers/clk/mmp/clk-pxa1908-apmu.c | 7 +
> drivers/pmdomain/Kconfig | 1 +
> drivers/pmdomain/Makefile | 1 +
> drivers/pmdomain/marvell/Kconfig | 18 ++
> drivers/pmdomain/marvell/Makefile | 3 +
> .../pmdomain/marvell/pxa1908-power-controller.c | 274 +++++++++++++++++++++
> include/dt-bindings/power/marvell,pxa1908-power.h | 17 ++
> 14 files changed, 369 insertions(+), 8 deletions(-)
> ---
> base-commit: 76eeb9b8de9880ca38696b2fb56ac45ac0a25c6c
> change-id: 20250803-pxa1908-genpd-15918db5260c
>
> Best regards,
> --
> Duje Mihanović <duje@...emihanovic.xyz>
Patch 1 -> 2 applied for next, thanks!
Note, the DT patch (patch 1) is available on the immutable dt branch
too for clock/soc maintainers to pull, if needed.
Kind regards
Uffe
Powered by blists - more mailing lists