[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250917170202.197929-1-john.madieu.xa@bp.renesas.com>
Date: Wed, 17 Sep 2025 19:01:54 +0200
From: John Madieu <john.madieu.xa@...renesas.com>
To: conor+dt@...nel.org,
daniel.lezcano@...aro.org,
geert+renesas@...der.be,
krzk+dt@...nel.org,
lukasz.luba@....com,
magnus.damm@...il.com,
mturquette@...libre.com,
robh@...nel.org,
rui.zhang@...el.com,
sboyd@...nel.org,
will@...nel.org
Cc: biju.das.jz@...renesas.com,
catalin.marinas@....com,
devicetree@...r.kernel.org,
john.madieu@...il.com,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
p.zabel@...gutronix.de,
rafael@...nel.org,
John Madieu <john.madieu.xa@...renesas.com>
Subject: [PATCH v9 0/4] thermal: renesas: Add support for RZ/G3E
This series adds support for the temperature sensor unit (TSU) found on the
Renesas RZ/G3E SoC.
The initial syscon patch [1] the series depends on has already been accepted.
Changes:
v9:
* Remove driver-specific read/write indirection and use readl/writel
* Use devm_mutex_init()
* Switch to syscon_regmap_lookup_by_phandle_args()
v8:
* Use of_parse_phandle_with_fixed_args() for trim values
* Update binding doc and collect Rb tag from Rob
* Use millidegree computation to for better precision
v6 -> v7
* Update DTS trim priperty name and specifier, updading the documentation
accordingly
* Refactor main driver: remove spinlock usage, using polling timeout as computed
from datasheet. Also use polling for get_temp() while using IRQ for trip-point
cross detection, and finally add both runtime and sleep PM support.
* Add new patch to update sys #address-cells as trim specifier now requires an
offset from sys base
v5 -> v6
* Minor typo fix
* Constify regmap config in patch 1/5
v4 -> v5
* Remove useless curly braces on single line-protected scoped guards
v3 -> v4
* Improve commit messages
v2 -> v3
* Remove useless 'renesas,tsu-operating-mode' property
v1 -> v2
* Fix yaml warnings from dt-binding
* Update IRQ names to reflect TSU expectations
Regards,
[1] https://lore.kernel.org/linux-devicetree/20250818162859.9661-2-john.madieu.xa@bp.renesas.com/
John Madieu (4):
dt-bindings: thermal: r9a09g047-tsu: Document the TSU unit
thermal: renesas: rzg3e: Add thermal driver for the Renesas RZ/G3E SoC
arm64: dts: renesas: r9a09g047: Add TSU node
arm64: defconfig: Enable the Renesas RZ/G3E thermal driver
.../thermal/renesas,r9a09g047-tsu.yaml | 87 +++
MAINTAINERS | 7 +
arch/arm64/boot/dts/renesas/r9a09g047.dtsi | 48 ++
arch/arm64/configs/defconfig | 1 +
drivers/thermal/renesas/Kconfig | 7 +
drivers/thermal/renesas/Makefile | 1 +
drivers/thermal/renesas/rzg3e_thermal.c | 547 ++++++++++++++++++
7 files changed, 698 insertions(+)
create mode 100644 Documentation/devicetree/bindings/thermal/renesas,r9a09g047-tsu.yaml
create mode 100644 drivers/thermal/renesas/rzg3e_thermal.c
--
2.25.1
Powered by blists - more mailing lists