linux-kernel - [PATCH v2 3/5] spi: spi-nxp-fspi: Add the DDR LUT command support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250917-flexspi-ddr-v2-3-bb9fe2a01889@nxp.com>
Date: Wed, 17 Sep 2025 15:27:08 +0800
From: Haibo Chen <haibo.chen@....com>
To: Han Xu <han.xu@....com>, Yogesh Gaur <yogeshgaur.83@...il.com>, 
 Mark Brown <broonie@...nel.org>, Frank Li <frank.li@....com>
Cc: linux-spi@...r.kernel.org, imx@...ts.linux.dev, 
 linux-kernel@...r.kernel.org, Haibo Chen <haibo.chen@....com>, 
 Frank Li <Frank.Li@....com>
Subject: [PATCH v2 3/5] spi: spi-nxp-fspi: Add the DDR LUT command support

For DTR mode, flexspi need to use DDR LUT command, flexspi will switch
to DDR mode when detect the DDR LUT command.

Reviewed-by: Frank Li <Frank.Li@....com>
Signed-off-by: Haibo Chen <haibo.chen@....com>
---
 drivers/spi/spi-nxp-fspi.c | 20 +++++++++++++++-----
 1 file changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index a1c9ad03379682dc1fc2908fbd83e1ae8e91588f..bd61f951d6befdb78cdd84d4531aab378a47c56f 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -559,12 +559,21 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 	u32 target_lut_reg;
 
 	/* cmd */
-	lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth),
-			     op->cmd.opcode);
+	if (op->cmd.dtr) {
+		lutval[0] |= LUT_DEF(0, LUT_CMD_DDR, LUT_PAD(op->cmd.buswidth),
+				     op->cmd.opcode >> 8);
+		lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_CMD_DDR,
+					      LUT_PAD(op->cmd.buswidth),
+					      op->cmd.opcode & 0xFF);
+		lutidx++;
+	} else {
+		lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth),
+				     op->cmd.opcode);
+	}
 
 	/* addr bytes */
 	if (op->addr.nbytes) {
-		lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_ADDR,
+		lutval[lutidx / 2] |= LUT_DEF(lutidx, op->addr.dtr ? LUT_ADDR_DDR : LUT_ADDR,
 					      LUT_PAD(op->addr.buswidth),
 					      op->addr.nbytes * 8);
 		lutidx++;
@@ -572,7 +581,7 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 
 	/* dummy bytes, if needed */
 	if (op->dummy.nbytes) {
-		lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_DUMMY,
+		lutval[lutidx / 2] |= LUT_DEF(lutidx, op->dummy.dtr ? LUT_DUMMY_DDR : LUT_DUMMY,
 		/*
 		 * Due to FlexSPI controller limitation number of PAD for dummy
 		 * buswidth needs to be programmed as equal to data buswidth.
@@ -587,7 +596,8 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 	if (op->data.nbytes) {
 		lutval[lutidx / 2] |= LUT_DEF(lutidx,
 					      op->data.dir == SPI_MEM_DATA_IN ?
-					      LUT_NXP_READ : LUT_NXP_WRITE,
+					      (op->data.dtr ? LUT_READ_DDR : LUT_NXP_READ) :
+					      (op->data.dtr ? LUT_WRITE_DDR : LUT_NXP_WRITE),
 					      LUT_PAD(op->data.buswidth),
 					      0);
 		lutidx++;

-- 
2.34.1