| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250916-judyln-dts-v2-1-5e16e60263af@postmarketos.org>
Date: Tue, 16 Sep 2025 18:09:47 -0700
From: Paul Sajna <sajattack@...tmarketos.org>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, David Heidelberg <david@...t.cz>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, phone-devel@...r.kernel.org,
Amir Dahan <system64fumo@...tonmail.com>,
Christopher Brown <crispybrown@...il.com>,
Paul Sajna <sajattack@...tmarketos.org>
Subject: [PATCH v2 01/13] arm64: dts: qcom: sdm845-lg-common: Sort nodes
and properties
in accordance with:
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html
Signed-off-by: Paul Sajna <sajattack@...tmarketos.org>
---
arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 124 ++++++++++++-------------
1 file changed, 62 insertions(+), 62 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index 99dafc6716e76e25aad0755e6004dc952779689f..82d6543835324ed92300c4ed24c51f4b79321f99 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -38,11 +38,6 @@ reserved-memory {
#size-cells = <2>;
ranges;
- qseecom_mem: memory@...00000 {
- reg = <0 0xb2000000 0 0x1800000>;
- no-map;
- };
-
gpu_mem: memory@...15000 {
reg = <0 0x8c415000 0 0x2000>;
no-map;
@@ -99,6 +94,11 @@ memory@...00000 {
no-map;
};
+ qseecom_mem: memory@...00000 {
+ reg = <0 0xb2000000 0 0x1800000>;
+ no-map;
+ };
+
/* rmtfs lower guard */
memory@...00000 {
reg = <0 0xf0800000 0 0x1000>;
@@ -482,14 +482,22 @@ &mss_pil {
status = "okay";
};
+&pm8998_gpios {
+ vol_up_pin_a: vol-up-active-state {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ };
+};
+
&pm8998_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&sdhc_2 {
- status = "okay";
-
cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
@@ -497,55 +505,8 @@ &sdhc_2 {
vmmc-supply = <&vreg_l21a_2p95>;
vqmmc-supply = <&vddpx_2>;
-};
-
-/*
- * UFS works partially and only with clk_ignore_unused.
- * Sometimes it crashes with I/O errors.
- */
-&ufs_mem_hc {
- status = "okay";
-
- reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
- vcc-supply = <&vreg_l20a_2p95>;
- vcc-max-microamp = <600000>;
-};
-
-&ufs_mem_phy {
- status = "okay";
-
- vdda-phy-supply = <&vdda_ufs1_core>;
- vdda-pll-supply = <&vdda_ufs1_1p2>;
-};
-
-&usb_1 {
- status = "okay";
-};
-
-&usb_1_dwc3 {
- /* TODO: these devices have usb id pin */
- dr_mode = "peripheral";
-};
-
-&usb_1_hsphy {
- status = "okay";
-
- vdd-supply = <&vdda_usb1_ss_core>;
- vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
- vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
- qcom,imp-res-offset-value = <8>;
- qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
- qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
- qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
-&usb_1_qmpphy {
status = "okay";
-
- vdda-phy-supply = <&vdda_usb1_ss_1p2>;
- vdda-pll-supply = <&vdda_usb1_ss_core>;
};
/* PINCTRL - additions to nodes defined in sdm845.dtsi */
@@ -586,12 +547,51 @@ sd_card_det_n: sd-card-det-n-state {
};
};
-&pm8998_gpios {
- vol_up_pin_a: vol-up-active-state {
- pins = "gpio6";
- function = "normal";
- input-enable;
- bias-pull-up;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
- };
+/*
+ * UFS works partially and only with clk_ignore_unused.
+ * Sometimes it crashes with I/O errors.
+ */
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <600000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vdda_ufs1_core>;
+ vdda-pll-supply = <&vdda_ufs1_1p2>;
+
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* TODO: these devices have usb id pin */
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+
+ status = "okay";
+};
+
+&usb_1_qmpphy {
+ vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb1_ss_core>;
+
+ status = "okay";
};
--
2.51.0
Powered by blists - more mailing lists