linux-kernel - [PATCH 6/9] arm64: dts: qcom: ipq5424: Enable QPIC SPI NAND support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250918094017.3844338-7-quic_mdalam@quicinc.com>
Date: Thu, 18 Sep 2025 15:10:14 +0530
From: Md Sadre Alam <quic_mdalam@...cinc.com>
To: <broonie@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
        <conor+dt@...nel.org>, <andersson@...nel.org>,
        <konradybcio@...nel.org>, <vkoul@...nel.org>,
        <linux-arm-msm@...r.kernel.org>, <linux-spi@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <dmaengine@...r.kernel.org>
CC: <quic_varada@...cinc.com>, <quic_mdalam@...cinc.com>
Subject: [PATCH 6/9] arm64: dts: qcom: ipq5424: Enable QPIC SPI NAND support

Enable QPIC SPI NAND flash controller support on the IPQ5424 RDP466
reference design platform.

The RDP466 board features a SPI NAND flash device connected to the QPIC
controller for primary storage. This patch enables the QPIC BAM DMA
controller and SPI NAND interface of QPIC, and configures the necessary
pin control settings for proper operation.

Signed-off-by: Md Sadre Alam <quic_mdalam@...cinc.com>
---
 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 43 +++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index 738618551203..accb15b0d742 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -224,6 +224,29 @@ data-pins {
 		};
 	};
 
+	qpic_snand_default_state: qpic-snand-default-state {
+		clock-pins {
+			pins = "gpio5";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		cs-pins {
+			pins = "gpio4";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
 	uart0_pins: uart0-default-state {
 		pins = "gpio10", "gpio11", "gpio12", "gpio13";
 		function = "uart0";
@@ -246,6 +269,26 @@ pcie3_default_state: pcie3-default-state {
 	};
 };
 
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qpic_snand_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-engine = <&qpic_nand>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
 &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 	pinctrl-names = "default";
-- 
2.34.1