Message-ID: <20250918104009.94754-1-herve.codina@bootlin.com>
Date: Thu, 18 Sep 2025 12:39:58 +0200
From: "Herve Codina (Schneider Electric)" <herve.codina@...tlin.com>
To: Thomas Gleixner <tglx@...utronix.de>,
	Wolfram Sang <wsa+renesas@...g-engineering.com>,
	Hoan Tran <hoan@...amperecomputing.com>,
	Linus Walleij <linus.walleij@...aro.org>,
	Bartosz Golaszewski <brgl@...ev.pl>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Geert Uytterhoeven <geert+renesas@...der.be>,
	Magnus Damm <magnus.damm@...il.com>,
	Saravana Kannan <saravanak@...gle.com>,
	Serge Semin <fancer.lancer@...il.com>,
	Herve Codina <herve.codina@...tlin.com>
Cc: Phil Edworthy <phil.edworthy@...esas.com>,
	linux-gpio@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-renesas-soc@...r.kernel.org,
	Pascal Eberhard <pascal.eberhard@...com>,
	Miquel Raynal <miquel.raynal@...tlin.com>,
	Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: [PATCH v3 0/8] gpio: renesas: Add support for GPIO and related interrupts in RZ/N1 SoC

Hi,

This series adds support for GPIO and GPIO IRQ mux available in the
RZ/N1 SoCs.

The first patches in this series are related to a new helper introduced
to parse an interrupt-map property.
  - patch 1: Introduce the helper (for_each_of_imap_item)
  - patch 2: Add a unittest for the new helper
  - patch 3 and 4: convert existing drivers to use this new helper

Patch 4 will conflicts with commit 40c26230a1bf ("irqchip: Use int type
to store negative error codes") available in linux-next.

Patch 5 adds support for GPIO (device-tree description)

The last patches (6, 7 and 8) of the series are related to GPIO
interrupts and GPIO IRQ multiplexer.

In the RZ/N1 SoCs, GPIO interrupts are wired to a GPIO IRQ multiplexer.

This multiplexer does nothing but select 8 GPIO IRQ lines out of the 96
available to wire them to the GIC input lines.

One upstreaming attempt have been done previously by Phil Edworthy [1]
but the series has never been applied.

Based on my understanding, I have fully reworked the driver proposed by
Phil and removed the IRQ domain. Indeed, the device doesn't handle
interrupts. It just routes signals.

Also, as an interrupt-map property is used, the driver cannot be
involved as an interrupt controller itself. It is a nexus node.

With that in mind,
  - Patch 6 is related to the irq-mux binding.

  - Patch 7 introduces the irq-mux driver.
    This driver uses the 'for_each_of_imap_item' helper introduced
    previously. Indeed, the lines routing is defined by the
    interrupt-map property and the driver needs to set registers to
    apply this routing.

  - Patch 8 is the RZ/N1 device-tree description update to have the
    support for the GPIO interrupts.

[1] https://lore.kernel.org/all/20190219155511.28507-1-phil.edworthy@renesas.com/

Best regards,
Hervé

Changes v2 -> v3
  v2: https://lore.kernel.org/lkml/20250909120041.154459-1-herve.codina@bootlin.com/

  Reordered patches as suggested by Thomas Gleixner.

  Patch 1: (3 in v2)
    - Replace a wrong 'extern' by 'static inline' in of_irq.h  (detected
      by test robots)

  Patch 2: (4 in v2)
  Patch 3: (5 in v2)
  Patch 4: (6 in v2)
    - No changes

  Patch 5: (1 in v2)
    - Add 'Reviewed-by: Wolfram Sang'
    - Add 'Tested-by: Wolfram Sang'

  Patch 6: (2 in v2)
    - Add '#address-cells = <0>;' in the interrupt-controller node
      present in the example.

  Patch 7:
  Patch 8:
    - No changes

Changes v1 -> v2
  v1: https://lore.kernel.org/lkml/20250725152618.32886-1-herve.codina@bootlin.com/

  Rebase on top of v6.17-rc5

  Patch 1 in v1
    - Removed in v2 (no need for RZ/N1 compatible strings).

  Patch 1 (2 in v1)
    - Fix node names (issue reported by Rob's bot)
    - Fix compatible RZ/N1 compatible strings
    - Removed undocumented and unused 'bank-name' properties

  Patch 2 (3 in v1)
   - Remove 'interrupts' property
   - Update 'interrupt-map' description

  Patch 3 (4 in v1)
   - Rework of_irq_foreach_imap() to provide the for_each_of_imap_item
     iterator (similar to for_each_of_range)

  Patch 4 (new in v2)
   - Add a unittest for for_each_of_imap_item

  Patch 5 (new in v2)
   - Convert irqchip/ls-extirq to use for_each_of_imap_item

  Patch 6 (new in v2)
   - Convert irqchip/renesas-rza1 to use for_each_of_imap_item

  Patch 7 (5 in v1)
   - Use for_each_of_imap_item
   - Remove 'interrupts' property usage

  Patch 8 (6 in v1)
   - Remove 'interrupts' property

Herve Codina (Schneider Electric) (8):
  of/irq: Introduce for_each_of_imap_item
  of: unittest: Add a test case for for_each_of_imap_item iterator
  irqchip/ls-extirq: Use for_each_of_imap_item iterator
  irqchip/renesas-rza1: Use for_each_of_imap_item iterator
  ARM: dts: r9a06g032: Add GPIO controllers
  dt-bindings: soc: renesas: Add the Renesas RZ/N1 GPIO Interrupt
    Multiplexer
  soc: renesas: Add support for Renesas RZ/N1 GPIO Interrupt Multiplexer
  ARM: dts: r9a06g032: Add support for GPIO interrupts

 .../soc/renesas/renesas,rzn1-gpioirqmux.yaml  |  87 +++++++++
 arch/arm/boot/dts/renesas/r9a06g032.dtsi      | 170 ++++++++++++++++++
 drivers/irqchip/irq-ls-extirq.c               |  47 ++---
 drivers/irqchip/irq-renesas-rza1.c            |  43 ++---
 drivers/of/irq.c                              |  70 ++++++++
 .../of/unittest-data/tests-interrupts.dtsi    |   9 +
 drivers/of/unittest.c                         | 116 ++++++++++++
 drivers/soc/renesas/Kconfig                   |   4 +
 drivers/soc/renesas/Makefile                  |   1 +
 drivers/soc/renesas/rzn1_irqmux.c             | 110 ++++++++++++
 include/linux/of_irq.h                        |  41 ++++-
 11 files changed, 640 insertions(+), 58 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/renesas/renesas,rzn1-gpioirqmux.yaml
 create mode 100644 drivers/soc/renesas/rzn1_irqmux.c

-- 
2.51.0

Powered by blists - more mailing lists