Message-ID: <20250919073052.GO2912318@black.igk.intel.com>
Date: Fri, 19 Sep 2025 09:30:52 +0200
From: Mika Westerberg <mika.westerberg@...ux.intel.com>
To: 李佳怡 <lijiayi@...inos.cn>
Cc: linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH RFC] thunderbolt: Re-add DP resources on resume

On Fri, Sep 19, 2025 at 03:24:20PM +0800, 李佳怡 wrote:
> 
> 
> 在 2025/9/19 00:43, Mika Westerberg 写道:
> > On Thu, Sep 18, 2025 at 06:20:59PM +0200, Mika Westerberg wrote:
> > > Hi,
> > > 
> > > On Thu, Sep 18, 2025 at 04:34:31PM +0800, 李佳怡 wrote:
> > > > 
> > > > 
> > > > 在 2025/9/17 20:50, Mika Westerberg 写道:
> > > > > On Wed, Sep 17, 2025 at 06:12:31PM +0800, 李佳怡 wrote:
> > > > > > 
> > > > > > As requested, I've attached the complete dmesg output (from boot to after
> > > > > > resume) reproducing the issue.
> > > > > > 
> > > > > > Testing Methodology:
> > > > > > 1. Start with the Targus Thunderbolt dock already connected to the system
> > > > > > 2. Enter S3 suspend (sleep) with no DP monitor connected to the dock
> > > > > > 3. Resume from S3
> > > > > > 4. After the system has fully resumed, connect the DP monitor to the dock
> > > > > 
> > > > > Thanks! It is badly line wrapped. I wonder if you can just attach it?
> > > > > Anyways I found some unexpected things there:
> > > > > 
> > > > > > [    8.647850] With USB4 patch v1.0.0
> > > > > 
> > > > > What is this? ;-)
> > > > 
> > > > Thanks for your help!
> > > > 
> > > > This is a self-compiled kernel based on version 5.4 with backported
> > > > Thunderbolt drivers. I will also attach the kernel log from a build using
> > > > the linux-6.6.y branch of the community linux-stable repository.
> > > 
> > > Okay but I really suggest using more recent kernel. 6.16 is current stable
> > > so that would be good.
> > > 
> > > > > > [    8.647860] ACPI: bus type thunderbolt registered
> > > > > > [    8.664660] [7] nhi_probe:1326: thunderbolt 0000:2c:00.0: total paths: 21
> > > > > > [    8.665209] [7] tb_ring_alloc:586: thunderbolt 0000:2c:00.0: allocating
> > > > > > TX ring 0 of size 10
> > > > > > [    8.665243] [7] tb_ring_alloc:586: thunderbolt 0000:2c:00.0: allocating
> > > > > > RX ring 0 of size 10
> > > > > > [    8.665267] [7] tb_ctl_alloc:665: thunderbolt 0000:2c:00.0: control
> > > > > > channel created
> > > > > > [    8.665272] [7] icm_probe:2549: thunderbolt 0000:2c:00.0: ICM not
> > > > > > supported on this controller
> > > > > > [    8.665285] [7] tb_ring_free:840: thunderbolt 0000:2c:00.0: freeing RX
> > > > > > ring 0
> > > > > > [    8.665294] [7] tb_ring_free:840: thunderbolt 0000:2c:00.0: freeing TX
> > > > > > ring 0
> > > > > 
> > > > > What is this?
> > > > > 
> > > > > Is this Intel TB/USB4 controller or something else? All USB4 compliant
> > > > > controllers should go directly to tb.c as that's the part dealing with
> > > > > software connection manager. The above looks like it tries first with the
> > > > > firmware connection manager and that should not happen outside of Intel
> > > > > Thunderbolt 3 hosts.
> > > > 
> > > > Yes, there is a mistake. I discovered that during the USB4_NATIVE_CONTROL
> > > > negotiation in the firmware, an OSC_CAPABILITIES_MASK_ERROR bit was being
> > > > set incorrectly, which should not have happened.
> > > > 
> > > > The log I will attach next has been modified to fix this issue.
> > > 
> > > [..]
> > > 
> > > > [    0.498976] [1] tb_switch_reset:1666: thunderbolt 0000:2c:00.0: 0: resetting
> > > > [    0.533329] [1] tb_add_dp_resources:217: thunderbolt 0000:2c:00.0: 0:10: DP IN resource available
> > > > [    0.533959] [1] tb_add_dp_resources:217: thunderbolt 0000:2c:00.0: 0:11: DP IN resource available
> > > 
> > > The DP IN resources were added here.
> > > 
> > > [..]
> > > 
> > > > [   19.035726] [171] tb_switch_set_wake:3445: thunderbolt 0000:2c:00.0: 0: enabling wakeup: 0x3f
> > > > [   19.037401] [171] tb_ring_stop:768: thunderbolt 0000:2c:00.0: stopping RX ring 0
> > > > [   19.037412] [171] ring_interrupt_active:141: thunderbolt 0000:2c:00.0: disabling interrupt at register 0x38200 bit 21 (0x200001 -> 0x1)
> > > > [   19.037439] [171] tb_ring_stop:768: thunderbolt 0000:2c:00.0: stopping TX ring 0
> > > > [   19.037449] [171] ring_interrupt_active:141: thunderbolt 0000:2c:00.0: disabling interrupt at register 0x38200 bit 0 (0x1 -> 0x0)
> > > > [   19.037463] [171] tb_ctl_stop:733: thunderbolt 0000:2c:00.0: control channel stopped
> > > 
> > > Runtime suspend.
> > > 
> > > (and a couple more)
> > > 
> > > > [  266.399800] [3870] tb_ctl_start:703: thunderbolt 0000:2c:00.0: control channel starting...
> > > > [  266.399808] [3870] tb_ring_start:693: thunderbolt 0000:2c:00.0: starting TX ring 0
> > > > [  266.399821] [3870] ring_interrupt_active:141: thunderbolt 0000:2c:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
> > > > [  266.399826] [3870] tb_ring_start:693: thunderbolt 0000:2c:00.0: starting RX ring 0
> > > > [  266.399837] [3870] ring_interrupt_active:141: thunderbolt 0000:2c:00.0: enabling interrupt at register 0x38200 bit 21 (0x1 -> 0x200001)
> > > > [  266.399848] [3870] tb_switch_resume:3478: thunderbolt 0000:2c:00.0: 0: resuming switch
> > > > [  266.399852] [3870] tb_switch_configure:2590: thunderbolt 0000:2c:00.0: restoring Switch at 0x0 (depth: 0, up port: 5)
> > > > [  266.400032] [3870] tb_switch_set_wake:3447: thunderbolt 0000:2c:00.0: 0: disabling wakeup
> > > 
> > > Around this time you should see the hotplug events coming to the DP IN
> > > adapters. But there is none.
> > > 
> > > There is a bit in the DP adapter config space (DHP) that can be used to
> > > disable this but the spec says it defaults to 0. Anyways I suggest to check
> > > that (and also the Plugged bit). You can dump these using tbtools [1]. Let
> > > me know if you want help with that.
> > 
> > Nevermind about the Plugged bit, that's not applicable here.
> > 
> > Here's how to dump the DHP bit. This is from Intel host:
> > 
> > # tbdump -vv -r 0 -N 1 -a 5 ADP_CS_5
> > 0x0005 0x00004809 0b00000000 00000000 01001000 00001001 ..H. ADP_CS_5
> >    [00:06]        0x9 Max Input HopID
> >    [11:17]        0x9 Max Output HopID
> >    [22:28]        0x0 Link Credits Allocated
> >    [29:29]        0x0 HEC Error Enable (HEE)
> >    [30:30]        0x0 Flow Control Error Enable (FCEE)
> >    [31:31]        0x0 Disable Hot Plug Events (DHP)
> 
> Thank you for your help. As you suggested, I tried kernel 6.16, but the
> issue still persists.
> 
> The logs and device vendor information are included in the attachment. I
> also ran the tbdump command, and the result shows the DHP bit is set to 0.
> Does this indicate there might still be other issues?
> 
> # tbdump -vv -r 0 -N 1  -a 5 ADP_CS_5

Please run it against the DP IN adapters. That's 10 and 11. The 5 above was
just an example from Intel HW.

# tbdump -vv -r 0 -N 1  -a 10 ADP_CS_5

and

# tbdump -vv -r 0 -N 1  -a 11 ADP_CS_5

The lspci dump indicates this is ASMedia host controller. I did not even
know that they have such thing. I thought they only have device (which
should be working in Linux). The host side may require some additional
enablement.

Powered by blists - more mailing lists