[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5cmkdeo6he3w5a3sqk5ptwwnv6oad5tl3xoll4knved2mo4y3h@enwotijbifvb>
Date: Sat, 20 Sep 2025 14:01:03 +0530
From: Manivannan Sadhasivam <mani@...nel.org>
To: Siddharth Vadapalli <s-vadapalli@...com>
Cc: lpieralisi@...nel.org, kwilczynski@...nel.org, robh@...nel.org,
bhelgaas@...gle.com, jingoohan1@...il.com, christian.bruel@...s.st.com,
qiang.yu@....qualcomm.com, mayank.rana@....qualcomm.com, thippeswamy.havalige@....com,
shradha.t@...sung.com, quic_schintav@...cinc.com, inochiama@...il.com,
cassel@...nel.org, kishon@...nel.org, sergio.paracuellos@...il.com,
18255117159@....com, rongqianfeng@...o.com, jirislaby@...nel.org,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, srk@...com
Subject: Re: [PATCH v2 10/10] PCI: keystone: Add support to build as a
loadable module
On Sat, Sep 20, 2025 at 01:41:35PM +0530, Siddharth Vadapalli wrote:
> On Sat, Sep 20, 2025 at 12:10:59AM +0530, Manivannan Sadhasivam wrote:
> > On Fri, Sep 12, 2025 at 05:46:21PM +0530, Siddharth Vadapalli wrote:
> > > The 'pci-keystone.c' driver is the application/glue/wrapper driver for the
> > > Designware PCIe Controllers on TI SoCs. Now that all of the helper APIs
> > > that the 'pci-keystone.c' driver depends upon have been exported for use,
> > > enable support to build the driver as a loadable module.
> > >
> > > Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
> > > ---
> > >
> > > v1: https://lore.kernel.org/r/20250903124505.365913-12-s-vadapalli@ti.com/
> > > Changes since v1:
> > > - Based on the feedback from Manivannan Sadhasivam <mani@...nel.org> at:
> > > https://lore.kernel.org/r/2gzqupa7i7qhiscwm4uin2jmdb6qowp55mzk7w4o3f73ob64e7@taf5vjd7lhc5/
> > > builtin_platform_driver() is being retained in the driver due to which
> > > the change made in the v1 patch of replacing builtin_platform_driver()
> > > with module_platform_driver() has been discarded in this patch.
> > >
> > > drivers/pci/controller/dwc/Kconfig | 6 +++---
> > > drivers/pci/controller/dwc/pci-keystone.c | 22 ++++++++++++++++++++++
> > > 2 files changed, 25 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> > > index 34abc859c107..46012d6a607e 100644
> > > --- a/drivers/pci/controller/dwc/Kconfig
> > > +++ b/drivers/pci/controller/dwc/Kconfig
> > > @@ -482,10 +482,10 @@ config PCI_DRA7XX_EP
> > > This uses the DesignWare core.
> > >
> > > config PCI_KEYSTONE
> > > - bool
> > > + tristate
> > >
> > > config PCI_KEYSTONE_HOST
> > > - bool "TI Keystone PCIe controller (host mode)"
> > > + tristate "TI Keystone PCIe controller (host mode)"
> > > depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
> > > depends on PCI_MSI
> > > select PCIE_DW_HOST
> > > @@ -497,7 +497,7 @@ config PCI_KEYSTONE_HOST
> > > DesignWare core functions to implement the driver.
> > >
> > > config PCI_KEYSTONE_EP
> > > - bool "TI Keystone PCIe controller (endpoint mode)"
> > > + tristate "TI Keystone PCIe controller (endpoint mode)"
> > > depends on ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
> > > depends on PCI_ENDPOINT
> > > select PCIE_DW_EP
> > > diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
> > > index e85942b4f6be..661e31b60a48 100644
> > > --- a/drivers/pci/controller/dwc/pci-keystone.c
> > > +++ b/drivers/pci/controller/dwc/pci-keystone.c
> > > @@ -17,6 +17,7 @@
> > > #include <linux/irqchip/chained_irq.h>
> > > #include <linux/irqdomain.h>
> > > #include <linux/mfd/syscon.h>
> > > +#include <linux/module.h>
> > > #include <linux/msi.h>
> > > #include <linux/of.h>
> > > #include <linux/of_irq.h>
> > > @@ -132,6 +133,7 @@ struct keystone_pcie {
> > > struct device_node *msi_intc_np;
> > > struct irq_domain *intx_irq_domain;
> > > struct device_node *np;
> > > + struct gpio_desc *reset_gpio;
> > >
> > > /* Application register space */
> > > void __iomem *va_app_base; /* DT 1st resource */
> > > @@ -1211,6 +1213,7 @@ static const struct of_device_id ks_pcie_of_match[] = {
> > > },
> > > { },
> > > };
> > > +MODULE_DEVICE_TABLE(of, ks_pcie_of_match);
> > >
> > > static int ks_pcie_probe(struct platform_device *pdev)
> > > {
> > > @@ -1329,6 +1332,7 @@ static int ks_pcie_probe(struct platform_device *pdev)
> > > dev_err(dev, "Failed to get reset GPIO\n");
> > > goto err_link;
> > > }
> > > + ks_pcie->reset_gpio = gpiod;
> > >
> > > /* Obtain references to the PHYs */
> > > for (i = 0; i < num_lanes; i++)
> > > @@ -1440,9 +1444,23 @@ static void ks_pcie_remove(struct platform_device *pdev)
> > > {
> > > struct keystone_pcie *ks_pcie = platform_get_drvdata(pdev);
> > > struct device_link **link = ks_pcie->link;
> > > + struct dw_pcie *pci = ks_pcie->pci;
> > > int num_lanes = ks_pcie->num_lanes;
> > > + const struct ks_pcie_of_data *data;
> > > struct device *dev = &pdev->dev;
> > > + enum dw_pcie_device_mode mode;
> > > +
> > > + ks_pcie_disable_error_irq(ks_pcie);
> > > + data = of_device_get_match_data(dev);
> > > + mode = data->mode;
> > > + if (mode == DW_PCIE_RC_TYPE) {
> > > + dw_pcie_host_deinit(&pci->pp);
> > > + } else {
> > > + pci_epc_deinit_notify(pci->ep.epc);
> > > + dw_pcie_ep_deinit(&pci->ep);
> > > + }
> > >
> > > + gpiod_set_value_cansleep(ks_pcie->reset_gpio, 0);
> >
> > Can ks_pcie_remove() be called for a builtin_platform_driver?
>
> It cannot be executed but I have added it for the sake of completeness - in
> the same manner that the initial implementation didn't simply make the
> 'ks_pcie_remove()' function a no-op and the code exists as if it could
> be executed or if it were to be executed at some point in the future.
>
It is a dead code, that's it. Drop it in this patch or separately before and add
it back later when irq subsystem fixes the irq disposal issues.
- Mani
--
மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists