[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250920-ppp_light_accel_mag_vol-down-v1-4-c8bbcd3e2e94@gmail.com>
Date: Sat, 20 Sep 2025 23:41:06 -0700
From: Rudraksha Gupta via B4 Relay <devnull+guptarud.gmail.com@...nel.org>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Heiko Stuebner <heiko@...ech.de>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
Rudraksha Gupta <guptarud@...il.com>,
"Leonardo G. Trombetta" <lgtrombetta@....com>
Subject: [PATCH 4/5] arm64: dts: rk3399-pinephone-pro: Add mount-matrix for
magnetometer
From: "Leonardo G. Trombetta" <lgtrombetta@....com>
After experimenting with the magnetometer on the Pinephone Pro I found
out the mount-matrix currently reported by the AF8133J driver is just
the identity matrix (no rotation), which is wrong. It would seem to me
that there is currently no `mount-matrix` info and that's why the driver
reports a trivial answer. As far as I can tell from my tests, a 90
degree clockwise rotation in the XY plane would align it properly.
Signed-off-by: Leonardo G. Trombetta <lgtrombetta@....com>
Signed-off-by: Rudraksha Gupta <guptarud@...il.com>
---
arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 8ff64004b0a6e3b472077516ab360c29852d7c9f..9442ca4c9ae47d639ed6139c370bacf1bffa65b6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -561,6 +561,11 @@ af8133j: compass@1c {
reset-gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
avdd-supply = <&vcc_3v0>;
dvdd-supply = <&vcc_1v8>;
+
+ mount-matrix =
+ "0", "1", "0",
+ "-1", "0", "0",
+ "0", "0", "1";
};
};
--
2.51.0
Powered by blists - more mailing lists