linux-kernel - Re: [PATCH v5 14/14] drm/msm/dp: Add support for lane mapping configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <b8d2c97b-2b23-4866-8d20-c20868e878e3@oss.qualcomm.com>
Date: Mon, 22 Sep 2025 11:23:38 +0800
From: Xiangxu Yin <xiangxu.yin@....qualcomm.com>
To: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Cc: Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I
 <kishon@...nel.org>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
 <conor+dt@...nel.org>,
        Rob Clark <robin.clark@....qualcomm.com>,
        Dmitry Baryshkov <lumag@...nel.org>,
        Abhinav Kumar
 <abhinav.kumar@...ux.dev>,
        Jessica Zhang <jessica.zhang@....qualcomm.com>,
        Sean Paul <sean@...rly.run>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        fange.zhang@....qualcomm.com, yongxing.mou@....qualcomm.com,
        li.liu@....qualcomm.com, Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>
Subject: Re: [PATCH v5 14/14] drm/msm/dp: Add support for lane mapping
 configuration


On 9/20/2025 2:35 AM, Dmitry Baryshkov wrote:
> On Fri, Sep 19, 2025 at 10:24:31PM +0800, Xiangxu Yin wrote:
>> QCS615 platform requires non-default logical-to-physical lane mapping due
>> to its unique hardware routing. Unlike the standard mapping sequence
>> <0 1 2 3>, QCS615 uses <3 2 0 1>, which necessitates explicit
>> configuration via the data-lanes property in the device tree. This ensures
>> correct signal routing between the DP controller and PHY.
>>
>> For partial definitions, fill remaining lanes with unused physical lanes
>> in ascending order.
>>
>> Signed-off-by: Xiangxu Yin <xiangxu.yin@....qualcomm.com>
>> ---
>>  drivers/gpu/drm/msm/dp/dp_ctrl.c | 10 +++----
>>  drivers/gpu/drm/msm/dp/dp_link.c | 60 ++++++++++++++++++++++++++++++++++++++++
>>  drivers/gpu/drm/msm/dp/dp_link.h |  1 +
>>  3 files changed, 66 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dp/dp_link.c b/drivers/gpu/drm/msm/dp/dp_link.c
>> index 2aeb3ecf76fab2ee6a9512b785ca5dceebfc3964..34a91e194a124ef5372f13352f7b3513aa88da2a 100644
>> --- a/drivers/gpu/drm/msm/dp/dp_link.c
>> +++ b/drivers/gpu/drm/msm/dp/dp_link.c
>> @@ -1236,6 +1236,61 @@ static u32 msm_dp_link_link_frequencies(struct device_node *of_node)
>>  	return frequency;
>>  }
>>  
>> +/*
>> + * Always populate msm_dp_link->lane_map with 4 lanes.
>> + * - Use DTS "data-lanes" if present; otherwise fall back to default mapping.
>> + * - For partial definitions, fill remaining entries with unused lanes in
>> + *   ascending order.
>> + */
>> +static int msm_dp_link_lane_map(struct device *dev, struct msm_dp_link *msm_dp_link)
>> +{
>> +	struct device_node *of_node = dev->of_node;
>> +	struct device_node *endpoint;
>> +	int cnt = msm_dp_link->max_dp_lanes;
>> +	u32 tmp[DP_MAX_NUM_DP_LANES];
>> +	u32 map[DP_MAX_NUM_DP_LANES] = {0, 1, 2, 3}; /* default 1:1 mapping */
>> +	bool used[DP_MAX_NUM_DP_LANES] = {false};
>> +	int i, j = 0, ret = -EINVAL;
>> +
>> +	endpoint = of_graph_get_endpoint_by_regs(of_node, 1, -1);
>> +	if (endpoint) {
>> +		ret = of_property_read_u32_array(endpoint, "data-lanes", tmp, cnt);
>> +		if (ret)
>> +			dev_dbg(dev, "endpoint data-lanes read failed (ret=%d)\n", ret);
>> +	}
>> +
>> +	if (ret) {
>> +		ret = of_property_read_u32_array(of_node, "data-lanes", tmp, cnt);
>> +		if (ret) {
>> +			dev_info(dev, "data-lanes not defined, set to default\n");
>> +			goto out;
>> +		}
>> +	}
>> +
>> +	for (i = 0; i < cnt; i++) {
>> +		if (tmp[i] >= DP_MAX_NUM_DP_LANES) {
>> +			dev_err(dev, "data-lanes[%d]=%u out of range\n", i, tmp[i]);
>> +			return -EINVAL;
>> +		}
>> +		used[tmp[i]] = true;
>> +		map[i] = tmp[i];
>> +	}
>> +
>> +	/* Fill the remaining entries with unused physical lanes (ascending) */
>> +	for (i = cnt; i < DP_MAX_NUM_DP_LANES && j < DP_MAX_NUM_DP_LANES; j++) {
> Nit: i = cnt, j = 0; Don't init loop variables at the top of the
> function.
>
> Other than that:
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
>

Ack.


>> +		if (!used[j])
>> +			map[i++] = j;
>> +	}
>> +
>> +out:
>> +	if (endpoint)
>> +		of_node_put(endpoint);
>> +
>> +	dev_dbg(dev, "data-lanes count %d <%d %d %d %d>\n", cnt, map[0], map[1], map[2], map[3]);
>> +	memcpy(msm_dp_link->lane_map, map, sizeof(map));
>> +	return 0;
>> +}
>> +
>>  static int msm_dp_link_parse_dt(struct device *dev, struct msm_dp_link *msm_dp_link)
>>  {
>>  	struct device_node *of_node = dev->of_node;