linux-kernel - [PATCH RFC 5/7] i2c: davinci: calculate bus freq from Hz instead of kHz

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250922-i2c-mux-v1-5-28c94a610930@gmail.com>
Date: Mon, 22 Sep 2025 08:21:00 +0200
From: Marcus Folkesson <marcus.folkesson@...il.com>
To: Wolfram Sang <wsa+renesas@...g-engineering.com>, 
 Peter Rosin <peda@...ntia.se>, 
 Michael Hennerich <michael.hennerich@...log.com>, 
 Bartosz Golaszewski <brgl@...ev.pl>, Andi Shyti <andi.shyti@...nel.org>
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, 
 Marcus Folkesson <marcus.folkesson@...il.com>
Subject: [PATCH RFC 5/7] i2c: davinci: calculate bus freq from Hz instead
 of kHz

The bus frequency is unnecessarily converted between Hz and kHz in
several places.
This is probably an old legacy from the old times (pre-devicetrees)
when the davinci_i2c_platform_data took the bus_freq in kHz.

Stick to Hz.

Signed-off-by: Marcus Folkesson <marcus.folkesson@...il.com>
---
 drivers/i2c/busses/i2c-davinci.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 6a3d4e9e07f45ecc228943e877cde1fd9d72e8cb..6b18938457d0c5cabc323c364d9330c2890df107 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -117,8 +117,6 @@
 /* timeout for pm runtime autosuspend */
 #define DAVINCI_I2C_PM_TIMEOUT	1000	/* ms */
 
-#define DAVINCI_I2C_DEFAULT_BUS_FREQ	100
-
 struct davinci_i2c_dev {
 	struct device           *dev;
 	void __iomem		*base;
@@ -209,16 +207,16 @@ static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
 	if (device_is_compatible(dev->dev, "ti,keystone-i2c"))
 		d = 6;
 
-	clk = ((input_clock / (psc + 1)) / (dev->bus_freq * 1000));
+	clk = ((input_clock / (psc + 1)) / (dev->bus_freq));
 	/* Avoid driving the bus too fast because of rounding errors above */
-	if (input_clock / (psc + 1) / clk > dev->bus_freq * 1000)
+	if (input_clock / (psc + 1) / clk > dev->bus_freq)
 		clk++;
 	/*
 	 * According to I2C-BUS Spec 2.1, in FAST-MODE LOW period should be at
 	 * least 1.3uS, which is not the case with 50% duty cycle. Driving HIGH
 	 * to LOW ratio as 1 to 2 is more safe.
 	 */
-	if (dev->bus_freq > 100)
+	if (dev->bus_freq > 100000)
 		clkl = (clk << 1) / 3;
 	else
 		clkl = (clk >> 1);
@@ -269,7 +267,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKL_REG));
 	dev_dbg(dev->dev, "CLKH = %d\n",
 		davinci_i2c_read_reg(dev, DAVINCI_I2C_CLKH_REG));
-	dev_dbg(dev->dev, "bus_freq = %dkHz\n", dev->bus_freq);
+	dev_dbg(dev->dev, "bus_freq = %dHz\n", dev->bus_freq);
 
 
 	/* Take the I2C module out of reset: */
@@ -761,9 +759,9 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 
 	r = device_property_read_u32(&pdev->dev, "clock-frequency", &prop);
 	if (r)
-		prop = DAVINCI_I2C_DEFAULT_BUS_FREQ;
+		prop = I2C_MAX_STANDARD_MODE_FREQ;
 
-	dev->bus_freq = prop / 1000;
+	dev->bus_freq = prop;
 
 	dev->has_pfunc = device_property_present(&pdev->dev, "ti,has-pfunc");
 

-- 
2.50.1