linux-kernel - [PATCH v1 3/4] arm64: dts: qcom: Add PCIe 3 support for HAMOA-IOT-SOM platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20250922075509.3288419-4-ziyue.zhang@oss.qualcomm.com>
Date: Mon, 22 Sep 2025 15:55:08 +0800
From: Ziyue Zhang <ziyue.zhang@....qualcomm.com>
To: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
        krzk+dt@...nel.org, conor+dt@...nel.org, jingoohan1@...il.com,
        mani@...nel.org, lpieralisi@...nel.org, kwilczynski@...nel.org,
        bhelgaas@...gle.com, johan+linaro@...nel.org, vkoul@...nel.org,
        kishon@...nel.org, neil.armstrong@...aro.org, abel.vesa@...aro.org,
        kw@...ux.com
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
        linux-phy@...ts.infradead.org, qiang.yu@....qualcomm.com,
        quic_krichai@...cinc.com, quic_vbadigan@...cinc.com,
        Ziyue Zhang <ziyue.zhang@....qualcomm.com>
Subject: [PATCH v1 3/4] arm64: dts: qcom: Add PCIe 3 support for HAMOA-IOT-SOM platform

Update the HAMOA-IOT-SOM device tree to enable PCIe 3 support. Add perst
wake and clkreq sideband signals and required regulators in PCIe3
controller and PHY device tree node.

Signed-off-by: Ziyue Zhang <ziyue.zhang@....qualcomm.com>
---
 arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi | 70 +++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
index 0c8ae34c1f37..7486204a4a46 100644
--- a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
@@ -390,6 +390,53 @@ &gpu_zap_shader {
 	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
 };
 
+&pm8550ve_8_gpios {
+	pcie_x8_12v: pcie-12v-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pmc8380_3_gpios {
+	pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+
+	pm_sde7_main_3p3_en: pcie-main-3p3-default-state {
+		pins = "gpio6";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pcie3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_default>;
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l3c_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
 &pcie4 {
 	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
@@ -471,6 +518,29 @@ &tlmm {
 	gpio-reserved-ranges = <34 2>, /* TPM LP & INT */
 			       <44 4>; /* SPI (TPM) */
 
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio144";
+			function = "pcie3_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie4_default: pcie4-default-state {
 		clkreq-n-pins {
 			pins = "gpio147";
-- 
2.34.1