| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250922103241.16213-14-farbere@amazon.com>
Date: Mon, 22 Sep 2025 10:32:39 +0000
From: Eliav Farber <farbere@...zon.com>
To: <richard@....at>, <anton.ivanov@...bridgegreys.com>,
<johannes@...solutions.net>, <dave.hansen@...ux.intel.com>,
<luto@...nel.org>, <peterz@...radead.org>, <tglx@...utronix.de>,
<mingo@...hat.com>, <bp@...en8.de>, <x86@...nel.org>, <hpa@...or.com>,
<tony.luck@...el.com>, <qiuxu.zhuo@...el.com>, <james.morse@....com>,
<mchehab@...nel.org>, <rric@...nel.org>, <harry.wentland@....com>,
<sunpeng.li@....com>, <Rodrigo.Siqueira@....com>,
<alexander.deucher@....com>, <christian.koenig@....com>,
<Xinhui.Pan@....com>, <airlied@...il.com>, <daniel@...ll.ch>,
<evan.quan@....com>, <maarten.lankhorst@...ux.intel.com>,
<mripard@...nel.org>, <tzimmermann@...e.de>, <jdelvare@...e.com>,
<linux@...ck-us.net>, <linus.walleij@...aro.org>,
<dmitry.torokhov@...il.com>, <wens@...e.org>, <jernej.skrabec@...il.com>,
<samuel@...lland.org>, <agk@...hat.com>, <snitzer@...nel.org>,
<dm-devel@...ts.linux.dev>, <mailhol.vincent@...adoo.fr>,
<wg@...ndegger.com>, <mkl@...gutronix.de>, <davem@...emloft.net>,
<edumazet@...gle.com>, <kuba@...nel.org>, <pabeni@...hat.com>,
<alexandre.torgue@...s.st.com>, <joabreu@...opsys.com>,
<mcoquelin.stm32@...il.com>, <krzysztof.kozlowski@...aro.org>,
<malattia@...ux.it>, <hdegoede@...hat.com>, <ilpo.jarvinen@...ux.intel.com>,
<markgross@...nel.org>, <artur.paszkiewicz@...el.com>, <jejb@...ux.ibm.com>,
<martin.petersen@...cle.com>, <sakari.ailus@...ux.intel.com>,
<gregkh@...uxfoundation.org>, <clm@...com>, <josef@...icpanda.com>,
<dsterba@...e.com>, <luc.vanoostenryck@...il.com>, <rostedt@...dmis.org>,
<mhiramat@...nel.org>, <pmladek@...e.com>,
<andriy.shevchenko@...ux.intel.com>, <linux@...musvillemoes.dk>,
<senozhatsky@...omium.org>, <minchan@...nel.org>,
<akpm@...ux-foundation.org>, <dsahern@...nel.org>, <shuah@...nel.org>,
<keescook@...omium.org>, <wad@...omium.org>, <farbere@...zon.com>,
<David.Laight@...LAB.COM>, <arnd@...nel.org>, <linux-um@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-edac@...r.kernel.org>,
<amd-gfx@...ts.freedesktop.org>, <dri-devel@...ts.freedesktop.org>,
<linux-hwmon@...r.kernel.org>, <linux-input@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-sunxi@...ts.linux.dev>,
<linux-media@...r.kernel.org>, <linux-can@...r.kernel.org>,
<netdev@...r.kernel.org>, <linux-stm32@...md-mailman.stormreply.com>,
<platform-driver-x86@...r.kernel.org>, <linux-scsi@...r.kernel.org>,
<linux-staging@...ts.linux.dev>, <linux-btrfs@...r.kernel.org>,
<linux-sparse@...r.kernel.org>, <linux-trace-kernel@...r.kernel.org>,
<linux-mm@...ck.org>, <linux-kselftest@...r.kernel.org>,
<bpf@...r.kernel.org>, <stable@...r.kernel.org>
CC: Christoph Hellwig <hch@...radead.org>, Dan Carpenter
<dan.carpenter@...aro.org>, "Jason A. Donenfeld" <Jason@...c4.com>, "Jens
Axboe" <axboe@...nel.dk>, Lorenzo Stoakes <lorenzo.stoakes@...cle.com>,
Mateusz Guzik <mjguzik@...il.com>, Matthew Wilcox <willy@...radead.org>,
Pedro Falcato <pedro.falcato@...il.com>
Subject: [PATCH 13/15 6.6.y] minmax.h: move all the clamp() definitions after the min/max() ones
From: David Laight <David.Laight@...LAB.COM>
[ Upstream commit c3939872ee4a6b8bdcd0e813c66823b31e6e26f7 ]
At some point the definitions for clamp() got added in the middle of the
ones for min() and max(). Re-order the definitions so they are more
sensibly grouped.
Link: https://lkml.kernel.org/r/8bb285818e4846469121c8abc3dfb6e2@AcuMS.aculab.com
Signed-off-by: David Laight <david.laight@...lab.com>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc: Arnd Bergmann <arnd@...nel.org>
Cc: Christoph Hellwig <hch@...radead.org>
Cc: Dan Carpenter <dan.carpenter@...aro.org>
Cc: Jason A. Donenfeld <Jason@...c4.com>
Cc: Jens Axboe <axboe@...nel.dk>
Cc: Lorenzo Stoakes <lorenzo.stoakes@...cle.com>
Cc: Mateusz Guzik <mjguzik@...il.com>
Cc: Matthew Wilcox <willy@...radead.org>
Cc: Pedro Falcato <pedro.falcato@...il.com>
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
Signed-off-by: Eliav Farber <farbere@...zon.com>
---
include/linux/minmax.h | 109 +++++++++++++++++++----------------------
1 file changed, 51 insertions(+), 58 deletions(-)
diff --git a/include/linux/minmax.h b/include/linux/minmax.h
index 91aa1b90c1bb..75fb7a6ad4c6 100644
--- a/include/linux/minmax.h
+++ b/include/linux/minmax.h
@@ -99,22 +99,6 @@
#define __careful_cmp(op, x, y) \
__careful_cmp_once(op, x, y, __UNIQUE_ID(x_), __UNIQUE_ID(y_))
-#define __clamp(val, lo, hi) \
- ((val) >= (hi) ? (hi) : ((val) <= (lo) ? (lo) : (val)))
-
-#define __clamp_once(val, lo, hi, uval, ulo, uhi) ({ \
- __auto_type uval = (val); \
- __auto_type ulo = (lo); \
- __auto_type uhi = (hi); \
- BUILD_BUG_ON_MSG(statically_true(ulo > uhi), \
- "clamp() low limit " #lo " greater than high limit " #hi); \
- BUILD_BUG_ON_MSG(!__types_ok3(uval, ulo, uhi), \
- "clamp("#val", "#lo", "#hi") signedness error"); \
- __clamp(uval, ulo, uhi); })
-
-#define __careful_clamp(val, lo, hi) \
- __clamp_once(val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
-
/**
* min - return minimum of two values of the same or compatible types
* @x: first value
@@ -170,6 +154,22 @@
#define max3(x, y, z) \
__careful_op3(max, x, y, z, __UNIQUE_ID(x_), __UNIQUE_ID(y_), __UNIQUE_ID(z_))
+/**
+ * min_t - return minimum of two values, using the specified type
+ * @type: data type to use
+ * @x: first value
+ * @y: second value
+ */
+#define min_t(type, x, y) __cmp_once(min, type, x, y)
+
+/**
+ * max_t - return maximum of two values, using the specified type
+ * @type: data type to use
+ * @x: first value
+ * @y: second value
+ */
+#define max_t(type, x, y) __cmp_once(max, type, x, y)
+
/**
* min_not_zero - return the minimum that is _not_ zero, unless both are zero
* @x: value1
@@ -180,6 +180,22 @@
typeof(y) __y = (y); \
__x == 0 ? __y : ((__y == 0) ? __x : min(__x, __y)); })
+#define __clamp(val, lo, hi) \
+ ((val) >= (hi) ? (hi) : ((val) <= (lo) ? (lo) : (val)))
+
+#define __clamp_once(val, lo, hi, uval, ulo, uhi) ({ \
+ __auto_type uval = (val); \
+ __auto_type ulo = (lo); \
+ __auto_type uhi = (hi); \
+ BUILD_BUG_ON_MSG(statically_true(ulo > uhi), \
+ "clamp() low limit " #lo " greater than high limit " #hi); \
+ BUILD_BUG_ON_MSG(!__types_ok3(uval, ulo, uhi), \
+ "clamp("#val", "#lo", "#hi") signedness error"); \
+ __clamp(uval, ulo, uhi); })
+
+#define __careful_clamp(val, lo, hi) \
+ __clamp_once(val, lo, hi, __UNIQUE_ID(v_), __UNIQUE_ID(l_), __UNIQUE_ID(h_))
+
/**
* clamp - return a value clamped to a given range with strict typechecking
* @val: current value
@@ -191,28 +207,30 @@
*/
#define clamp(val, lo, hi) __careful_clamp(val, lo, hi)
-/*
- * ..and if you can't take the strict
- * types, you can specify one yourself.
- *
- * Or not use min/max/clamp at all, of course.
- */
-
/**
- * min_t - return minimum of two values, using the specified type
- * @type: data type to use
- * @x: first value
- * @y: second value
+ * clamp_t - return a value clamped to a given range using a given type
+ * @type: the type of variable to use
+ * @val: current value
+ * @lo: minimum allowable value
+ * @hi: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of type
+ * @type to make all the comparisons.
*/
-#define min_t(type, x, y) __cmp_once(min, type, x, y)
+#define clamp_t(type, val, lo, hi) __careful_clamp((type)(val), (type)(lo), (type)(hi))
/**
- * max_t - return maximum of two values, using the specified type
- * @type: data type to use
- * @x: first value
- * @y: second value
+ * clamp_val - return a value clamped to a given range using val's type
+ * @val: current value
+ * @lo: minimum allowable value
+ * @hi: maximum allowable value
+ *
+ * This macro does no typechecking and uses temporary variables of whatever
+ * type the input argument @val is. This is useful when @val is an unsigned
+ * type and @lo and @hi are literals that will otherwise be assigned a signed
+ * integer type.
*/
-#define max_t(type, x, y) __cmp_once(max, type, x, y)
+#define clamp_val(val, lo, hi) clamp_t(typeof(val), val, lo, hi)
/*
* Do not check the array parameter using __must_be_array().
@@ -257,31 +275,6 @@
*/
#define max_array(array, len) __minmax_array(max, array, len)
-/**
- * clamp_t - return a value clamped to a given range using a given type
- * @type: the type of variable to use
- * @val: current value
- * @lo: minimum allowable value
- * @hi: maximum allowable value
- *
- * This macro does no typechecking and uses temporary variables of type
- * @type to make all the comparisons.
- */
-#define clamp_t(type, val, lo, hi) __careful_clamp((type)(val), (type)(lo), (type)(hi))
-
-/**
- * clamp_val - return a value clamped to a given range using val's type
- * @val: current value
- * @lo: minimum allowable value
- * @hi: maximum allowable value
- *
- * This macro does no typechecking and uses temporary variables of whatever
- * type the input argument @val is. This is useful when @val is an unsigned
- * type and @lo and @hi are literals that will otherwise be assigned a signed
- * integer type.
- */
-#define clamp_val(val, lo, hi) clamp_t(typeof(val), val, lo, hi)
-
static inline bool in_range64(u64 val, u64 start, u64 len)
{
return (val - start) < len;
--
2.47.3
Powered by blists - more mailing lists