linux-kernel - Re: [PATCH v5 12/14] phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <28eef277-c778-4ffe-94c6-2e90d58633de@oss.qualcomm.com>
Date: Mon, 22 Sep 2025 19:28:17 +0800
From: Xiangxu Yin <xiangxu.yin@....qualcomm.com>
To: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Cc: Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I
 <kishon@...nel.org>,
        Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley
 <conor+dt@...nel.org>,
        Rob Clark <robin.clark@....qualcomm.com>,
        Dmitry Baryshkov <lumag@...nel.org>,
        Abhinav Kumar
 <abhinav.kumar@...ux.dev>,
        Jessica Zhang <jessica.zhang@....qualcomm.com>,
        Sean Paul <sean@...rly.run>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        fange.zhang@....qualcomm.com, yongxing.mou@....qualcomm.com,
        li.liu@....qualcomm.com, Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>
Subject: Re: [PATCH v5 12/14] phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY
 config and DP mode support


On 9/22/2025 5:45 PM, Dmitry Baryshkov wrote:
> On Mon, Sep 22, 2025 at 02:58:17PM +0800, Xiangxu Yin wrote:
>> On 9/20/2025 2:41 AM, Dmitry Baryshkov wrote:
>>> On Fri, Sep 19, 2025 at 10:24:29PM +0800, Xiangxu Yin wrote:
>>>> Add QCS615-specific configuration for USB/DP PHY, including DP init
>>>> routines, voltage swing tables, and platform data. Add compatible
>>>> "qcs615-qmp-usb3-dp-phy".
>>>>
>>>> Signed-off-by: Xiangxu Yin <xiangxu.yin@....qualcomm.com>
>>>> ---
>>>>  drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 395 +++++++++++++++++++++++++++++++
>>>>  1 file changed, 395 insertions(+)
>>>>
>>>> +
>>>> +	writel(0x3f, qmp->dp_tx + QSERDES_V2_TX_TRANSCEIVER_BIAS_EN);
>>>> +	writel(0x10, qmp->dp_tx + QSERDES_V2_TX_HIGHZ_DRVR_EN);
>>>> +	writel(0x0a, qmp->dp_tx + QSERDES_V2_TX_TX_POL_INV);
>>>> +	writel(0x3f, qmp->dp_tx2 + QSERDES_V2_TX_TRANSCEIVER_BIAS_EN);
>>>> +	writel(0x10, qmp->dp_tx2 + QSERDES_V2_TX_HIGHZ_DRVR_EN);
>>>> +	writel(0x0a, qmp->dp_tx2 + QSERDES_V2_TX_TX_POL_INV);
>>> Are you sure that these don't need to be adjusted based on
>>> qmp->orientation or selected lanes count?
>>>
>>> In fact... I don't see orientation handling for DP at all. Don't we need
>>> it?
>>
>> Thanks for the review.
>>
>> I agree with your reasoning and compared talos 14nm HPG with hana/kona
>> 7nm PHY HPG; the 7nm COMBO PHY series has orientation/lane-count dependent
>> configs, but the 14nm PHY series does not. On QCS615 (talos), the TX_*
>> registers you pointed to are programmed with constant values regardless
>> of orientation or lane count. This has been confirmed from both the HPG
>> and the downstream reference driver.
> Thanks for the confirmation.
>
>> For orientation, from reference the only difference is DP_PHY_MODE, which
>> is set by qmp_usbc_configure_dp_mode(). The DP PHY does have an
>> SW_PORTSELECT-related register, but due to talos lane mapping from the
>> DP controller to the PHY not being the standard <0 1 2 3> sequence, it
>> cannot reliably handle orientation flip. Also, QCS615 is a fixed-
>> orientation platform (not DP-over-TypeC), so there is no validated hardware
>> path for orientation flip on this platform.
> Wait... I thought that the the non-standard lane order is handled by the
> DP driver, then we should be able to handle the orientation inside PHY
> driver as usual.


Yes, I have confirmed this with our verification team.

For the non-standard lane order, handling flip requires swapping mapped 
lane 0 ↔ lane 3 and lane 1 ↔ lane 2 in the logical2physical mapping.
This is a hardware limitation, and with the current PHY driver we cannot
propagate orientation status to dp_ctrl for processing.


> Anyway, please add a FIXME comment into the source file and a note to
> the commit message that SW_PORTSELECT should be handled, but it's not a
> part of this patch for the stated reasons.


OK, I will add a |FIXME| comment in |qmp_usbc_dp_power_on| and update the
related commit message.


>>
>>>> +
>>>> +	writel(0x18, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
>>>> +	writel(0x19, qmp->dp_dp_phy + QSERDES_DP_PHY_CFG);
>>>> +
>>>> +	if (readl_poll_timeout(qmp->dp_dp_phy + QSERDES_V2_DP_PHY_STATUS,
>>>> +			       status,
>>>> +			       ((status & BIT(1)) > 0),
>>>> +			       500,
>>>> +			       10000)){
>>>> +		dev_err(qmp->dev, "PHY_READY not ready\n");
>>>> +		return -ETIMEDOUT;
>>>> +	}
>>>> +
>>>> +	return 0;
>>>> +}
>>>> +