linux-kernel - [PATCH v3 0/2] PCI: imx6: Add a method to handle CLKREQ# override

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250922023741.906024-1-hongxing.zhu@nxp.com>
Date: Mon, 22 Sep 2025 10:37:39 +0800
From: Richard Zhu <hongxing.zhu@....com>
To: frank.li@....com,
	jingoohan1@...il.com,
	l.stach@...gutronix.de,
	lpieralisi@...nel.org,
	kwilczynski@...nel.org,
	mani@...nel.org,
	robh@...nel.org,
	bhelgaas@...gle.com,
	shawnguo@...nel.org,
	s.hauer@...gutronix.de,
	kernel@...gutronix.de,
	festevam@...il.com
Cc: linux-pci@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	imx@...ts.linux.dev,
	linux-kernel@...r.kernel.org
Subject: [PATCH v3 0/2] PCI: imx6: Add a method to handle CLKREQ# override

The CLKREQ# is an open drain, active low signal that is driven low by
the card to request reference clock. It's an optional signal added in
PCIe CEM r4.0, sec 2. Thus, this signal wouldn't be driven low if it's
reserved.

Since the reference clock controlled by CLKREQ# may be required by i.MX
PCIe host too. To make sure this clock is ready even when the CLKREQ#
isn't driven low by the card(e.x the scenario described above), force
CLKREQ# override active low for i.MX PCIe host during initialization.

The CLKREQ# override can be cleared safely when supports-clkreq is
present and PCIe link is up later. Because the CLKREQ# would be driven
low by the card at this time.

Main changes in v3:
- Rebase to v6.17-rc1.
- Update the commit message refer to Bjorn's suggestions.

Main changes in v2:
- Update the commit message, and collect the reviewed-by tag.

[PATCH v3 1/2] PCI: dwc: Invoke post_init in dw_pcie_resume_noirq()
[PATCH v3 2/2] PCI: imx6: Add a method to handle CLKREQ# override

drivers/pci/controller/dwc/pci-imx6.c             | 35 +++++++++++++++++++++++++++++++++++
drivers/pci/controller/dwc/pcie-designware-host.c |  3 +++
2 files changed, 38 insertions(+)