lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250922135901.2067-1-faisal.hassan@oss.qualcomm.com>
Date: Mon, 22 Sep 2025 19:29:01 +0530
From: Faisal Hassan <faisal.hassan@....qualcomm.com>
To: Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
        Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>,
        Neil Armstrong <neil.armstrong@...aro.org>,
        Johan Hovold <johan+linaro@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
        Wesley Cheng <quic_wcheng@...cinc.com>,
        Konrad Dybcio <quic_kdybcio@...cinc.com>,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        linux-kernel@...r.kernel.org
Cc: Faisal Hassan <faisal.hassan@....qualcomm.com>
Subject: [PATCH] phy: qcom-qmp-combo: Use regulator_bulk_data with init_load_uA for regulator setup

Replace the custom qmp_regulator_data structure with the standard
regulator_bulk_data and use the init_load_uA field to set regulator
load during initialization.

This change simplifies the regulator setup by removing manual
allocation and load configuration logic, and leverages
devm_regulator_bulk_get_const() to automatically apply load settings
before enabling regulators.

Signed-off-by: Faisal Hassan <faisal.hassan@....qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 49 +++--------------------
 1 file changed, 6 insertions(+), 43 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index f07d097b129f..97262ed63700 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1636,14 +1636,9 @@ static const struct qmp_phy_init_tbl x1e80100_usb43dp_pcs_usb_tbl[] = {
 };
 
 /* list of regulators */
-struct qmp_regulator_data {
-	const char *name;
-	unsigned int enable_load;
-};
-
-static struct qmp_regulator_data qmp_phy_vreg_l[] = {
-	{ .name = "vdda-phy", .enable_load = 21800 },
-	{ .name = "vdda-pll", .enable_load = 36000 },
+static struct regulator_bulk_data qmp_phy_vreg_l[] = {
+	{ .supply = "vdda-phy", .init_load_uA = 21800, },
+	{ .supply = "vdda-pll", .init_load_uA = 36000, },
 };
 
 static const u8 qmp_dp_v3_pre_emphasis_hbr3_hbr2[4][4] = {
@@ -1801,7 +1796,7 @@ struct qmp_phy_cfg {
 	const char * const *reset_list;
 	int num_resets;
 	/* regulators to be requested */
-	const struct qmp_regulator_data *vreg_list;
+	const struct regulator_bulk_data *vreg_list;
 	int num_vregs;
 
 	/* array of registers with different offsets */
@@ -3403,39 +3398,6 @@ static const struct dev_pm_ops qmp_combo_pm_ops = {
 			   qmp_combo_runtime_resume, NULL)
 };
 
-static int qmp_combo_vreg_init(struct qmp_combo *qmp)
-{
-	const struct qmp_phy_cfg *cfg = qmp->cfg;
-	struct device *dev = qmp->dev;
-	int num = cfg->num_vregs;
-	int ret, i;
-
-	qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
-	if (!qmp->vregs)
-		return -ENOMEM;
-
-	for (i = 0; i < num; i++)
-		qmp->vregs[i].supply = cfg->vreg_list[i].name;
-
-	ret = devm_regulator_bulk_get(dev, num, qmp->vregs);
-	if (ret) {
-		dev_err(dev, "failed at devm_regulator_bulk_get\n");
-		return ret;
-	}
-
-	for (i = 0; i < num; i++) {
-		ret = regulator_set_load(qmp->vregs[i].consumer,
-					cfg->vreg_list[i].enable_load);
-		if (ret) {
-			dev_err(dev, "failed to set load at %s\n",
-				qmp->vregs[i].supply);
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
 static int qmp_combo_reset_init(struct qmp_combo *qmp)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -4003,7 +3965,8 @@ static int qmp_combo_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = qmp_combo_vreg_init(qmp);
+	ret = devm_regulator_bulk_get_const(dev, qmp->cfg->num_vregs,
+					qmp->cfg->vreg_list, &qmp->vregs);
 	if (ret)
 		return ret;
 
-- 
2.17.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ