lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <12c84bff-6863-4730-b08a-631df904aa12@linux.alibaba.com>
Date: Tue, 23 Sep 2025 10:08:52 +0800
From: Shuai Xue <xueshuai@...ux.alibaba.com>
To: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
Cc: rostedt@...dmis.org, Lukas Wunner <lukas@...ner.de>,
 linux-pci@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
 linux-edac@...r.kernel.org, linux-trace-kernel@...r.kernel.org,
 helgaas@...nel.org, mattc@...estorage.com, Jonathan.Cameron@...wei.com,
 bhelgaas@...gle.com, tony.luck@...el.com, bp@...en8.de, mhiramat@...nel.org,
 mathieu.desnoyers@...icios.com, oleg@...hat.com, naveen@...nel.org,
 davem@...emloft.net, anil.s.keshavamurthy@...el.com, mark.rutland@....com,
 peterz@...radead.org, tianruidong@...ux.alibaba.com
Subject: Re: [PATCH v10 1/3] PCI: trace: Add a generic RAS tracepoint for
 hotplug event



在 2025/9/22 21:10, Ilpo Järvinen 写道:
> On Sat, 20 Sep 2025, Shuai Xue wrote:
> 
>> Hotplug events are critical indicators for analyzing hardware health,
>> and surprise link downs can significantly impact system performance and
>> reliability.
>>
>> Define a new TRACING_SYSTEM named "pci", add a generic RAS tracepoint
>> for hotplug event to help health checks. Add enum pci_hotplug_event in
>> include/uapi/linux/pci.h so applications like rasdaemon can register
>> tracepoint event handlers for it.
>>
>> The following output is generated when a device is hotplugged:
>>
>> $ echo 1 > /sys/kernel/debug/tracing/events/pci/pci_hp_event/enable
>> $ cat /sys/kernel/debug/tracing/trace_pipe
>>     irq/51-pciehp-88      [001] .....  1311.177459: pci_hp_event: 0000:00:02.0 slot:10, event:CARD_PRESENT
>>
>>     irq/51-pciehp-88      [001] .....  1311.177566: pci_hp_event: 0000:00:02.0 slot:10, event:LINK_UP
>>
>> Suggested-by: Lukas Wunner <lukas@...ner.de>
>> Suggested-by: Steven Rostedt <rostedt@...dmis.org>
>> Signed-off-by: Shuai Xue <xueshuai@...ux.alibaba.com>
>> Reviewed-by: Lukas Wunner <lukas@...ner.de>
>> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
>> ---
>>   drivers/pci/Makefile              |  2 +
>>   drivers/pci/hotplug/Makefile      |  3 +-
>>   drivers/pci/hotplug/pciehp_ctrl.c | 31 ++++++++++++---
>>   drivers/pci/trace.c               | 11 ++++++
>>   include/trace/events/pci.h        | 63 +++++++++++++++++++++++++++++++
>>   include/uapi/linux/pci.h          |  7 ++++
>>   6 files changed, 110 insertions(+), 7 deletions(-)
>>   create mode 100644 drivers/pci/trace.c
>>   create mode 100644 include/trace/events/pci.h
>>
>> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
>> index 67647f1880fb..bf389bc4dd3c 100644
>> --- a/drivers/pci/Makefile
>> +++ b/drivers/pci/Makefile
>> @@ -45,3 +45,5 @@ obj-y				+= controller/
>>   obj-y				+= switch/
>>   
>>   subdir-ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG
>> +
>> +CFLAGS_trace.o := -I$(src)
>> diff --git a/drivers/pci/hotplug/Makefile b/drivers/pci/hotplug/Makefile
>> index 40aaf31fe338..d41f7050b072 100644
>> --- a/drivers/pci/hotplug/Makefile
>> +++ b/drivers/pci/hotplug/Makefile
>> @@ -65,7 +65,8 @@ rpadlpar_io-objs	:=	rpadlpar_core.o \
>>   pciehp-objs		:=	pciehp_core.o	\
>>   				pciehp_ctrl.o	\
>>   				pciehp_pci.o	\
>> -				pciehp_hpc.o
>> +				pciehp_hpc.o	\
>> +				../trace.o
> 
> To make it useful for any PCI tracing, not juse hotplug, this object file
> should be added in drivers/pci/Makefile, not here.

Make sence. How about adding to the main CONFIG_PCI object:

diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index bf389bc4dd3c..d7f83d06351d 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -5,7 +5,7 @@
  obj-$(CONFIG_PCI)              += access.o bus.o probe.o host-bridge.o \
                                    remove.o pci.o pci-driver.o search.o \
                                    rom.o setup-res.o irq.o vpd.o \
-                                  setup-bus.o vc.o mmap.o devres.o
+                                  setup-bus.o vc.o mmap.o devres.o trace.o

  obj-$(CONFIG_PCI)              += msi/
  obj-$(CONFIG_PCI)              += pcie/

Thanks.

Best Regards,
Shuai

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ