[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <idyrlzhd5sotg3ylr7vbwmczimglffc75nafxbnhhm3ot2jn4w@ixerm6elfmre>
Date: Tue, 23 Sep 2025 04:50:59 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Chaoyi Chen <kernel@...kyi.com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Heiko Stuebner <heiko@...ech.de>, Sandy Huang <hjc@...k-chips.com>,
Andy Yan <andy.yan@...k-chips.com>,
Yubing Zhang <yubing.zhang@...k-chips.com>,
Frank Wang <frank.wang@...k-chips.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Amit Sunil Dhamne <amitsd@...gle.com>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Chaoyi Chen <chaoyi.chen@...k-chips.com>,
Dragan Simic <dsimic@...jaro.org>, Johan Jonker <jbx6244@...il.com>,
Diederik de Haas <didi.debian@...ow.org>,
Peter Robinson <pbrobinson@...il.com>, linux-usb@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-phy@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH v4 5/7] drm/rockchip: cdn-dp: Add multiple bridges to
support PHY port selection
On Mon, Sep 22, 2025 at 09:20:37AM +0800, Chaoyi Chen wrote:
> From: Chaoyi Chen <chaoyi.chen@...k-chips.com>
>
> The RK3399 has two USB/DP combo PHY and one CDN-DP controller. And
> the CDN-DP can be switched to output to one of the PHYs. If both ports
> are plugged into DP, DP will select the first port for output.
>
> This patch adds support for multiple bridges, enabling users to flexibly
> select the output port. For each PHY port, a separate encoder and bridge
> are registered.
>
> The change is based on the DRM AUX HPD bridge, rather than the
> extcon approach. This requires the DT to correctly describe the
> connections between the PHY, USB connector, and DP controller.
> And cdn_dp_parse_hpd_bridge_dt() will parses it and determines
> whether to register one or two bridges.
>
> Since there is only one DP controller, only one of the PHY ports can
> output at a time. The key is how to switch between different PHYs,
> which is handled by cdn_dp_switch_port() and cdn_dp_enable().
>
> There are two cases:
>
> 1. Neither bridge is enabled. In this case, both bridges can
> independently read the EDID, and the PHY port may switch before
> reading the EDID.
>
> 2. One bridge is already enabled. In this case, other bridges are not
> allowed to read the EDID.
>
> Since the scenario of two ports plug in at the same time is rare,
> I don't have a board which support two TypeC connector to test this.
> Therefore, I tested forced switching on a single PHY port, as well as
> output using a fake PHY port alongside a real PHY port.
>
> Signed-off-by: Chaoyi Chen <chaoyi.chen@...k-chips.com>
> ---
> drivers/gpu/drm/rockchip/Kconfig | 1 +
> drivers/gpu/drm/rockchip/cdn-dp-core.c | 398 +++++++++++++++++++++----
> drivers/gpu/drm/rockchip/cdn-dp-core.h | 23 +-
> 3 files changed, 366 insertions(+), 56 deletions(-)
>
> diff --git a/drivers/gpu/drm/rockchip/Kconfig b/drivers/gpu/drm/rockchip/Kconfig
> index faf50d872be3..3a6266279323 100644
> --- a/drivers/gpu/drm/rockchip/Kconfig
> +++ b/drivers/gpu/drm/rockchip/Kconfig
> @@ -55,6 +55,7 @@ config ROCKCHIP_CDN_DP
> select DRM_DISPLAY_HELPER
> select DRM_BRIDGE_CONNECTOR
> select DRM_DISPLAY_DP_HELPER
> + select DRM_AUX_HPD_BRIDGE
> help
> This selects support for Rockchip SoC specific extensions
> for the cdn DP driver. If you want to enable Dp on
> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.c b/drivers/gpu/drm/rockchip/cdn-dp-core.c
> index 1e27301584a4..784f5656fcc4 100644
> --- a/drivers/gpu/drm/rockchip/cdn-dp-core.c
> +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.c
> @@ -27,16 +27,17 @@
> #include "cdn-dp-core.h"
> #include "cdn-dp-reg.h"
>
> -static inline struct cdn_dp_device *bridge_to_dp(struct drm_bridge *bridge)
> +static int cdn_dp_switch_port(struct cdn_dp_device *dp, struct cdn_dp_port *prev_port,
> + struct cdn_dp_port *port);
> +
> +static inline struct cdn_dp_bridge *bridge_to_dp_bridge(struct drm_bridge *bridge)
> {
> - return container_of(bridge, struct cdn_dp_device, bridge);
> + return container_of(bridge, struct cdn_dp_bridge, bridge);
> }
>
> -static inline struct cdn_dp_device *encoder_to_dp(struct drm_encoder *encoder)
> +static inline struct cdn_dp_device *bridge_to_dp(struct drm_bridge *bridge)
> {
> - struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
> -
> - return container_of(rkencoder, struct cdn_dp_device, encoder);
> + return bridge_to_dp_bridge(bridge)->parent;
> }
>
> #define GRF_SOC_CON9 0x6224
> @@ -191,14 +192,27 @@ static int cdn_dp_get_sink_count(struct cdn_dp_device *dp, u8 *sink_count)
> static struct cdn_dp_port *cdn_dp_connected_port(struct cdn_dp_device *dp)
> {
> struct cdn_dp_port *port;
> - int i, lanes;
> + int i, lanes[MAX_PHY];
>
> for (i = 0; i < dp->ports; i++) {
> port = dp->port[i];
> - lanes = cdn_dp_get_port_lanes(port);
> - if (lanes)
> + lanes[i] = cdn_dp_get_port_lanes(port);
> + if (!dp->hpd_bridge_valid)
> return port;
> }
> +
> + if (dp->hpd_bridge_valid) {
> + /* If more than one port is available, pick the last active port */
> + if (dp->active_port > 0 && lanes[dp->active_port])
> + return dp->port[dp->active_port];
> +
> + /* If the last active port is not available, pick an available port in order */
> + for (i = 0; i < dp->bridge_count; i++) {
> + if (lanes[i])
> + return dp->port[i];
> + }
> + }
> +
> return NULL;
> }
>
> @@ -239,10 +253,11 @@ static enum drm_connector_status
> cdn_dp_bridge_detect(struct drm_bridge *bridge, struct drm_connector *connector)
> {
> struct cdn_dp_device *dp = bridge_to_dp(bridge);
> + struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
> enum drm_connector_status status = connector_status_disconnected;
>
> mutex_lock(&dp->lock);
> - if (dp->connected)
> + if (dp_bridge->connected && dp->connected)
> status = connector_status_connected;
> mutex_unlock(&dp->lock);
>
> @@ -253,10 +268,36 @@ static const struct drm_edid *
> cdn_dp_bridge_edid_read(struct drm_bridge *bridge, struct drm_connector *connector)
> {
> struct cdn_dp_device *dp = bridge_to_dp(bridge);
> - const struct drm_edid *drm_edid;
> + struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
> + struct cdn_dp_port *port = dp->port[dp_bridge->id];
> + struct cdn_dp_port *prev_port;
> + const struct drm_edid *drm_edid = NULL;
> + int i, ret;
>
> mutex_lock(&dp->lock);
> +
> + /* More than one port is available */
> + if (dp->bridge_count > 1 && !port->phy_enabled) {
> + for (i = 0; i < dp->bridge_count; i++) {
> + /* Another port already enable */
> + if (dp->bridge_list[i] != dp_bridge && dp->bridge_list[i]->enabled)
> + goto unlock;
> + /* Find already enabled port */
> + if (dp->port[i]->phy_enabled)
> + prev_port = dp->port[i];
> + }
> +
> + /* Switch to current port */
> + if (prev_port) {
> + ret = cdn_dp_switch_port(dp, prev_port, port);
> + if (ret)
> + goto unlock;
> + }
> + }
> +
> drm_edid = drm_edid_read_custom(connector, cdn_dp_get_edid_block, dp);
So... If I try reading EDID for the PHY 2 while PHY 1 is enabled, will
it return NULL, even if there is a monitor there? It totally feels like
this is one of the rare cases when caching EDIDs might make sense.
> +
> +unlock:
> mutex_unlock(&dp->lock);
>
> return drm_edid;
> @@ -267,12 +308,13 @@ cdn_dp_bridge_mode_valid(struct drm_bridge *bridge,
> const struct drm_display_info *display_info,
> const struct drm_display_mode *mode)
> {
> + struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
> struct cdn_dp_device *dp = bridge_to_dp(bridge);
> u32 requested, actual, rate, sink_max, source_max = 0;
> u8 lanes, bpc;
>
> /* If DP is disconnected, every mode is invalid */
> - if (!dp->connected)
> + if (!dp_bridge->connected || !dp->connected)
> return MODE_BAD;
>
> switch (display_info->bpc) {
> @@ -571,6 +613,7 @@ static void cdn_dp_display_info_update(struct cdn_dp_device *dp,
> static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_atomic_state *state)
> {
> struct cdn_dp_device *dp = bridge_to_dp(bridge);
> + struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
> struct drm_connector *connector;
> int ret, val;
>
> @@ -580,7 +623,7 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
>
> cdn_dp_display_info_update(dp, &connector->display_info);
>
> - ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, &dp->encoder.encoder);
> + ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, &dp_bridge->encoder.encoder);
> if (ret < 0) {
> DRM_DEV_ERROR(dp->dev, "Could not get vop id, %d", ret);
> return;
> @@ -599,6 +642,9 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
>
> mutex_lock(&dp->lock);
>
> + if (dp->hpd_bridge_valid)
> + dp->active_port = dp_bridge->id;
> +
Don't you need to switch port here? Consider reading EDID from port 1,
port 2 then enabling output on port 1.
> ret = cdn_dp_enable(dp);
> if (ret) {
> DRM_DEV_ERROR(dp->dev, "Failed to enable bridge %d\n",
> @@ -631,6 +677,7 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
> goto out;
> }
>
> + dp_bridge->enabled = true;
> out:
> mutex_unlock(&dp->lock);
> }
> @@ -638,9 +685,11 @@ static void cdn_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_at
> static void cdn_dp_bridge_atomic_disable(struct drm_bridge *bridge, struct drm_atomic_state *state)
> {
> struct cdn_dp_device *dp = bridge_to_dp(bridge);
> + struct cdn_dp_bridge *dp_bridge = bridge_to_dp_bridge(bridge);
> int ret;
>
> mutex_lock(&dp->lock);
> + dp_bridge->enabled = false;
>
> if (dp->active) {
> ret = cdn_dp_disable(dp);
> @@ -885,7 +934,8 @@ static void cdn_dp_pd_event_work(struct work_struct *work)
> {
> struct cdn_dp_device *dp = container_of(work, struct cdn_dp_device,
> event_work);
> - int ret;
> + bool connected;
> + int i, ret;
>
> mutex_lock(&dp->lock);
>
> @@ -944,9 +994,12 @@ static void cdn_dp_pd_event_work(struct work_struct *work)
>
> out:
> mutex_unlock(&dp->lock);
> - drm_bridge_hpd_notify(&dp->bridge,
> - dp->connected ? connector_status_connected
> - : connector_status_disconnected);
> + for (i = 0; i < dp->bridge_count; i++) {
> + connected = dp->connected && dp->bridge_list[i]->connected;
> + drm_bridge_hpd_notify(&dp->bridge_list[i]->bridge,
> + connected ? connector_status_connected
> + : connector_status_disconnected);
> + }
> }
>
> static int cdn_dp_pd_event(struct notifier_block *nb,
> @@ -966,28 +1019,99 @@ static int cdn_dp_pd_event(struct notifier_block *nb,
> return NOTIFY_DONE;
> }
>
> -static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
> +static void cdn_dp_typec_hpd_cb(void *data, enum drm_connector_status status)
> {
> - struct cdn_dp_device *dp = dev_get_drvdata(dev);
> - struct drm_encoder *encoder;
> - struct drm_connector *connector;
> - struct cdn_dp_port *port;
> - struct drm_device *drm_dev = data;
> - int ret, i;
> + struct cdn_dp_hpd_bridge *hpd_bridge = data;
> + struct cdn_dp_device *dp = hpd_bridge->parent;
>
> - ret = cdn_dp_parse_dt(dp);
> - if (ret < 0)
> - return ret;
> + dp->bridge_list[hpd_bridge->id]->connected = status == connector_status_connected;
> + schedule_work(&dp->event_work);
> +}
>
> - dp->drm_dev = drm_dev;
> - dp->connected = false;
> - dp->active = false;
> - dp->active_port = -1;
> - dp->fw_loaded = false;
> +static void cdn_dp_bridge_hpd_enable(struct cdn_dp_device *dp)
> +{
> + int i;
>
> - INIT_WORK(&dp->event_work, cdn_dp_pd_event_work);
> + if (!dp->hpd_bridge_valid)
> + return;
> +
> + for (i = 0; i < dp->bridge_count; i++) {
> + drm_bridge_hpd_enable(dp->hpd_bridge_list[i].bridge, cdn_dp_typec_hpd_cb,
> + &dp->hpd_bridge_list[i]);
> + }
> +}
> +
> +static void cdn_dp_bridge_hpd_disable(struct cdn_dp_device *dp)
> +{
> + int i;
> +
> + if (!dp->hpd_bridge_valid)
> + return;
> +
> + for (i = 0; i < dp->bridge_count; i++) {
> + drm_bridge_hpd_disable(dp->hpd_bridge_list[i].bridge);
> + }
> +}
> +
> +static int cdn_dp_switch_port(struct cdn_dp_device *dp, struct cdn_dp_port *prev_port,
> + struct cdn_dp_port *port)
> +{
> + int ret;
> +
> + if (dp->active)
> + return 0;
> +
> + cdn_dp_bridge_hpd_disable(dp);
> +
> + ret = cdn_dp_disable_phy(dp, prev_port);
> + if (ret)
> + goto out;
> + ret = cdn_dp_enable_phy(dp, port);
> + if (ret)
> + goto out;
> +
> + ret = cdn_dp_get_sink_capability(dp);
> + if (ret) {
> + cdn_dp_disable_phy(dp, port);
> + goto out;
> + }
> +
> + dp->active = true;
> + dp->lanes = port->lanes;
> +
> + if (!cdn_dp_check_link_status(dp)) {
> + dev_info(dp->dev, "Connected with sink; re-train link\n");
> +
> + ret = cdn_dp_train_link(dp);
> + if (ret) {
> + dev_err(dp->dev, "Training link failed: %d\n", ret);
> + goto out;
> + }
> +
> + ret = cdn_dp_set_video_status(dp, CONTROL_VIDEO_IDLE);
> + if (ret) {
> + dev_err(dp->dev, "Failed to idle video %d\n", ret);
> + goto out;
> + }
> +
> + ret = cdn_dp_config_video(dp);
> + if (ret)
> + dev_err(dp->dev, "Failed to configure video: %d\n", ret);
> + }
>
> - encoder = &dp->encoder.encoder;
> +out:
> + cdn_dp_bridge_hpd_enable(dp);
> + return ret;
> +}
> +
> +static int cdn_bridge_add(struct device *dev,
> + struct drm_bridge *bridge,
> + struct drm_encoder *encoder)
> +{
> + struct cdn_dp_device *dp = dev_get_drvdata(dev);
> + struct drm_device *drm_dev = dp->drm_dev;
> + struct drm_connector *connector;
> + int ret;
>
> encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
> dev->of_node);
> @@ -1002,23 +1126,23 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
>
> drm_encoder_helper_add(encoder, &cdn_dp_encoder_helper_funcs);
>
> - dp->bridge.ops =
> - DRM_BRIDGE_OP_DETECT |
> - DRM_BRIDGE_OP_EDID |
> - DRM_BRIDGE_OP_HPD |
> - DRM_BRIDGE_OP_DP_AUDIO;
> - dp->bridge.of_node = dp->dev->of_node;
> - dp->bridge.type = DRM_MODE_CONNECTOR_DisplayPort;
> - dp->bridge.hdmi_audio_dev = dp->dev;
> - dp->bridge.hdmi_audio_max_i2s_playback_channels = 8;
> - dp->bridge.hdmi_audio_spdif_playback = 1;
> - dp->bridge.hdmi_audio_dai_port = -1;
> -
> - ret = devm_drm_bridge_add(dev, &dp->bridge);
> + bridge->ops =
> + DRM_BRIDGE_OP_DETECT |
> + DRM_BRIDGE_OP_EDID |
> + DRM_BRIDGE_OP_HPD |
> + DRM_BRIDGE_OP_DP_AUDIO;
> + bridge->of_node = dp->dev->of_node;
> + bridge->type = DRM_MODE_CONNECTOR_DisplayPort;
> + bridge->hdmi_audio_dev = dp->dev;
> + bridge->hdmi_audio_max_i2s_playback_channels = 8;
> + bridge->hdmi_audio_spdif_playback = 1;
> + bridge->hdmi_audio_dai_port = -1;
> +
> + ret = devm_drm_bridge_add(dev, bridge);
> if (ret)
> return ret;
>
> - ret = drm_bridge_attach(encoder, &dp->bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> + ret = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
> if (ret)
> return ret;
>
> @@ -1031,6 +1155,167 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
>
> drm_connector_attach_encoder(connector, encoder);
>
> + return 0;
> +}
> +
> +static int cdn_dp_parse_hpd_bridge_dt(struct cdn_dp_device *dp)
> +{
> + struct device_node *np = dp->dev->of_node;
> + struct device_node *port __free(device_node) = of_graph_get_port_by_id(np, 1);
> + struct drm_bridge *bridge;
> + int count = 0;
> + int ret = 0;
> + int i;
> +
> + /* If device use extcon, do not use hpd bridge */
> + for (i = 0; i < dp->ports; i++) {
> + if (dp->port[i]->extcon) {
> + dp->bridge_count = 1;
> + return 0;
> + }
> + }
> +
> + /*
> + *
> + * &dp_out {
> + * dp_controller_output0: endpoint@0 {
> + * remote-endpoint = <&dp_phy0_in>
> + * };
> + *
> + * dp_controller_output1: endpoint@1 {
> + * remote-endpoint = <&dp_phy1_in>
> + * };
> + * };
> + *
> + * &tcphy0_dp {
> + * port {
> + * tcphy0_typec_dp: endpoint@0 {
> + * reg = <0>;
> + * remote-endpoint = <&usbc0_dp>;
> + * };
> + *
> + * dp_phy0_in: endpoint@1 {
> + * reg = <1>;
> + * remote-endpoint = <&dp_controller_output0>;
> + * };
> + * };
> + * };
> + *
> + * &tcphy1_dp {
> + * ...
> + * };
> + *
> + * usbcon0: connector {
> + * ...
> + * ports {
> + * ...
> + * port@2 {
> + * reg = <2>;
> + *
> + * usbc0_dp: endpoint {
> + * remote-endpoint = <&tcphy0_typec_dp>;
> + * };
> + * };
> + * };
> + * };
> + *
> + * usbcon1: connector {
> + * ...
> + * };
> + *
> + */
> +
> + /* One endpoint may correspond to one HPD bridge. */
> + for_each_of_graph_port_endpoint(port, dp_ep) {
> + /* Try to get "port" node of correspond PHY device */
> + struct device_node *phy_ep __free(device_node) =
> + of_graph_get_remote_endpoint(dp_ep);
> + struct device_node *phy_port __free(device_node) =
> + of_get_parent(phy_ep);
> +
> + if (!phy_port) {
> + continue;
> + }
> +
> + /*
> + * A PHY port may contain two endpoints: USB connector port or CDN-DP port.
> + * Try to find the node of USB connector.
And then there can be a retimer between PHY and the USB-C connector. Or
some signal MUX. Or DP-to-HDMI bridge. Please, don't parse DT for other
devices. Instead you can add drm_aux_bridge to your PHY and let DRM core
build the bridge chain following OF graph.
> + */
> + for_each_of_graph_port_endpoint(phy_port, typec_ep) {
> + struct device_node *connector_port __free(device_node) =
> + of_graph_get_remote_port_parent(typec_ep);
> + struct device_node *hpd_bridge_np __free(device_node) =
> + of_get_parent(connector_port);
> +
> + if (typec_ep == phy_ep)
> + continue;
> +
> + bridge = of_drm_find_bridge(hpd_bridge_np);
> + if (!bridge) {
> + ret = -EPROBE_DEFER;
> + goto out;
> + }
> +
> + dp->hpd_bridge_valid = true;
> + dp->hpd_bridge_list[count].bridge = bridge;
> + dp->hpd_bridge_list[count].parent = dp;
> + dp->hpd_bridge_list[count].id = count;
> + count++;
> + break;
> + }
> + }
> +
> +out:
> + dp->bridge_count = count ? count : 1;
> + return ret;
> +}
> +
> +static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
> +{
> + struct cdn_dp_device *dp = dev_get_drvdata(dev);
> + struct drm_bridge *bridge;
> + struct drm_encoder *encoder;
> + struct cdn_dp_port *port;
> + struct drm_device *drm_dev = data;
> + struct cdn_dp_bridge *bridge_list;
> + int ret, i;
> +
> + ret = cdn_dp_parse_dt(dp);
> + if (ret < 0)
> + return ret;
> +
> + ret = cdn_dp_parse_hpd_bridge_dt(dp);
> + if (ret)
> + return ret;
> +
> + dp->drm_dev = drm_dev;
> + dp->connected = false;
> + dp->active = false;
> + dp->active_port = -1;
> + dp->fw_loaded = false;
> +
> + for (i = 0; i < dp->bridge_count; i++) {
> + bridge_list = devm_drm_bridge_alloc(dev, struct cdn_dp_bridge, bridge,
> + &cdn_dp_bridge_funcs);
> + if (IS_ERR(bridge_list))
> + return PTR_ERR(bridge_list);
> + bridge_list->id = i;
> + bridge_list->parent = dp;
> + if (!dp->hpd_bridge_valid)
> + bridge_list->connected = true;
> + dp->bridge_list[i] = bridge_list;
> + }
> +
> + for (i = 0; i < dp->bridge_count; i++) {
> + encoder = &dp->bridge_list[i]->encoder.encoder;
> + bridge = &dp->bridge_list[i]->bridge;
> + ret = cdn_bridge_add(dev, bridge, encoder);
> + if (ret)
> + return ret;
> + }
> +
> + INIT_WORK(&dp->event_work, cdn_dp_pd_event_work);
> +
> for (i = 0; i < dp->ports; i++) {
> port = dp->port[i];
>
> @@ -1050,6 +1335,7 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
>
> pm_runtime_enable(dev);
>
> + cdn_dp_bridge_hpd_enable(dp);
> schedule_work(&dp->event_work);
>
> return 0;
> @@ -1058,10 +1344,14 @@ static int cdn_dp_bind(struct device *dev, struct device *master, void *data)
> static void cdn_dp_unbind(struct device *dev, struct device *master, void *data)
> {
> struct cdn_dp_device *dp = dev_get_drvdata(dev);
> - struct drm_encoder *encoder = &dp->encoder.encoder;
> + struct drm_encoder *encoder;
> + int i;
>
> cancel_work_sync(&dp->event_work);
> - encoder->funcs->destroy(encoder);
> + for (i = 0; i < dp->bridge_count; i++) {
> + encoder = &dp->bridge_list[i]->encoder.encoder;
> + encoder->funcs->destroy(encoder);
> + }
>
> pm_runtime_disable(dev);
> if (dp->fw_loaded)
> @@ -1112,10 +1402,10 @@ static int cdn_dp_probe(struct platform_device *pdev)
> int ret;
> int i;
>
> - dp = devm_drm_bridge_alloc(dev, struct cdn_dp_device, bridge,
> - &cdn_dp_bridge_funcs);
> - if (IS_ERR(dp))
> - return PTR_ERR(dp);
> + dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
> + if (!dp)
> + return -ENOMEM;
> +
> dp->dev = dev;
>
> match = of_match_node(cdn_dp_dt_ids, pdev->dev.of_node);
> diff --git a/drivers/gpu/drm/rockchip/cdn-dp-core.h b/drivers/gpu/drm/rockchip/cdn-dp-core.h
> index e9c30b9fd543..215f3da61af2 100644
> --- a/drivers/gpu/drm/rockchip/cdn-dp-core.h
> +++ b/drivers/gpu/drm/rockchip/cdn-dp-core.h
> @@ -38,6 +38,8 @@ enum vic_pxl_encoding_format {
> Y_ONLY = 0x10,
> };
>
> +struct cdn_dp_device;
> +
> struct video_info {
> bool h_sync_polarity;
> bool v_sync_polarity;
> @@ -63,16 +65,33 @@ struct cdn_dp_port {
> u8 id;
> };
>
> +struct cdn_dp_bridge {
> + struct cdn_dp_device *parent;
> + struct drm_bridge bridge;
> + struct rockchip_encoder encoder;
> + bool connected;
> + bool enabled;
> + int id;
> +};
> +
> +struct cdn_dp_hpd_bridge {
> + struct cdn_dp_device *parent;
> + struct drm_bridge *bridge;
> + int id;
> +};
> +
> struct cdn_dp_device {
> struct device *dev;
> struct drm_device *drm_dev;
> - struct drm_bridge bridge;
> - struct rockchip_encoder encoder;
> + int bridge_count;
> + struct cdn_dp_bridge *bridge_list[MAX_PHY];
> + struct cdn_dp_hpd_bridge hpd_bridge_list[MAX_PHY];
> struct drm_display_mode mode;
> struct platform_device *audio_pdev;
> struct work_struct event_work;
>
> struct mutex lock;
> + bool hpd_bridge_valid;
> bool connected;
> bool active;
> bool suspended;
> --
> 2.49.0
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists