Message-ID: <20250923120946.1218-1-zhangsenchuan@eswincomputing.com>
Date: Tue, 23 Sep 2025 20:09:45 +0800
From: zhangsenchuan@...incomputing.com
To: bhelgaas@...gle.com,
	lpieralisi@...nel.org,
	kwilczynski@...nel.org,
	mani@...nel.org,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	linux-pci@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	p.zabel@...gutronix.de,
	johan+linaro@...nel.org,
	quic_schintav@...cinc.com,
	shradha.t@...sung.com,
	cassel@...nel.org,
	thippeswamy.havalige@....com,
	mayank.rana@....qualcomm.com,
	inochiama@...il.com
Cc: ningyu@...incomputing.com,
	linmin@...incomputing.com,
	pinkesh.vaghela@...fochips.com,
	Senchuan Zhang <zhangsenchuan@...incomputing.com>
Subject: [PATCH v3 0/2] Add driver support for Eswin EIC7700 SoC PCIe controller

From: Senchuan Zhang <zhangsenchuan@...incomputing.com>

Changes in v3:
- Updates: eswin,eic7700-pcie.yaml
  - Based on the last patch yaml file, devicetree separates the root port
    node, changing it significantly. Therefore, "Reviewed-by: Krzysztof
    Kozlowski <krzysztof.kozlowski@...aro.org>" is not added.
  - Clock and reset drivers are under review. In yaml, macro definitions
    used in clock and reset can only be replaced by constant values.
  - Move the num-lanes and perst resets to the PCIe Root Port node, make
    it easier to support multiple Root Ports in future versions of the
    hardware.
  - Update the num-lanes attribute and modify define num-lanes as decimal.
  - Optimize the ranges attribute and clear the relocatable flag (bit 31)
    for any regions.
  - Update comment: inte~inth are actual interrupts and these names align
    with the interrupt names in the hardware IP, inte~inth interrupts
    corresponds to Deassert_INTA~Deassert_INTD.
  - Add Signed-off-by: Yanghui Ou <ouyanghui@...incomputing.com>.

- Updates: pcie-eic7700.c
  - Update the submission comment and add DWC IP revision, data rate, lane
    information.
  - Optimize the "config PCIE_EIC7700" configuration.
  - Optimize the macro definition, add bitfield definition for the mask,
    and remove redundant comments. optimize comments, make use of 80
    columns for comments.
  - Use the dw_pcie_find_capability function to obtain the offset by
    traversing the function list.
  - Remove the sets MPS code and configure it by PCI core.
  - Alphabetize so the menuconfig entries remain sorted by vendor.
  - Configure ESWIN VID:DID for Root Port as the default values are
	invalid,and remove the redundant lane config.
  - Use reverse Xmas order for all local variables in this driver
  - Hardware doesn't support MSI-X but it advertises MSI-X capability, set
    a flag and clear it conditionally.
  - Resets are all necessary, Update the interface function for resets.
  - Since driver does not depend on any parent to power on any resource,
    the pm runtime related functions are removed.
  - Remove "eswin_pcie_shutdown" function, our comment on the shutdown
    function is incorrect. Moreover, when the host powers reboots,it will
    enter the shutdown function, we are using host reset and do not need
    to assert perst. Therefore, the shutdown function is not necessary.
  - remove "eswin_pcie_remove", because it is not safe to remove it during
    runtime, and this driver has been modified to builtin_platform_driver
    and does not support hot plugging, therefore, the remove function is
    not needed.
  - The Suspend function adds link state judgment, and for controllers
    with active devices, resources cannot be turned off.
  - Add Signed-off-by: Yanghui Ou <ouyanghui@...incomputing.com>.
- Link to V2: https://lore.kernel.org/linux-pci/20250829082021.49-1-zhangsenchuan@eswincomputing.com/

Changes in v2:
- Updates: eswin,eic7700-pcie.yaml
  - Optimize the naming of "clock-names" and "reset-names".
  - Add a reference to "$ref: /schemas/pci/pci-host-bridge.yaml#".
    (The name of the reset attribute in the "snps,dw-pcie-common.yaml"
    file is different from our reset attribute and "snps,dw-pcie.yaml"
    file cannot be directly referenced)
  - Follow DTS coding style to optimize yaml attributes.
  - Remove status = "disabled" from yaml.

- Updates: pcie-eic7700.c
  - Remove unnecessary imported header files.
  - Use dev_err instead of pr_err and remove the WARN_ON function.
  - The eswin_evb_socket_power_on function is removed and not supported.
  - The eswin_pcie_remove function is placed after the probe function.
  - Optimize function alignment.
  - Manage the clock using the devm_clk_bulk_get_all_enabled function.
  - Handle the release of resources after the dw_pcie_host_init function
    call fails.
  - Remove the dev_dbg function and remove __exit_p.
  - Add support for the system pm function.
- Link to V1: https://lore.kernel.org/all/20250516094057.1300-1-zhangsenchuan@eswincomputing.com/

Senchuan Zhang (2):
  dt-bindings: PCI: EIC7700: Add Eswin PCIe host controller
  PCI: EIC7700: Add Eswin PCIe host controller driver

 .../bindings/pci/eswin,eic7700-pcie.yaml      | 173 +++++++
 drivers/pci/controller/dwc/Kconfig            |  11 +
 drivers/pci/controller/dwc/Makefile           |   1 +
 drivers/pci/controller/dwc/pcie-eic7700.c     | 446 ++++++++++++++++++
 4 files changed, 631 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/eswin,eic7700-pcie.yaml
 create mode 100644 drivers/pci/controller/dwc/pcie-eic7700.c

--
2.25.1

Powered by blists - more mailing lists