[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6CF6078CFA2EB2F4+aNH_RmNkM_hnsAYu@LT-Guozexi>
Date: Tue, 23 Sep 2025 10:00:38 +0800
From: Troy Mitchell <troy.mitchell@...ux.spacemit.com>
To: Aurelien Jarno <aurelien@...el32.net>, linux-kernel@...r.kernel.org,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Alexandre Ghiti <alex@...ti.fr>,
Yixun Lan <dlan@...too.org>
Cc: "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
"open list:RISC-V ARCHITECTURE" <linux-riscv@...ts.infradead.org>,
"open list:RISC-V SPACEMIT SoC Support" <spacemit@...ts.linux.dev>,
Troy Mitchell <troy.mitchell@...ux.spacemit.com>
Subject: Re: [PATCH 2/3] riscv: dts: spacemit: add 24c02 eeprom on BPI-F3
On Sun, Sep 21, 2025 at 11:01:42PM +0200, Aurelien Jarno wrote:
> The BPI-F3 contains a 24c02 eeprom, that contains among other things the
> MAC addresses of the two network interfaces. For this reason, mark it as
> read-only.
>
> Signed-off-by: Aurelien Jarno <aurelien@...el32.net>
> ---
> arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> index 3b6e4f52e9aad..574d10fdf9b82 100644
> --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> @@ -115,6 +115,15 @@ &i2c2 {
> pinctrl-0 = <&i2c2_0_cfg>;
> pinctrl-names = "default";
> status = "okay";
> +
> + eeprom@50 {
> + compatible = "atmel,24c02";
> + reg = <0x50>;
> + vcc-supply = <&vcc1v8_sys>;
> + pagesize = <16>;
I'm not sure this is 16..
Could you double check it?
- Troy
> + read-only;
> + size = <256>;
> + };
> };
>
> &i2c8 {
> @@ -143,7 +152,7 @@ buck2 {
> regulator-always-on;
> };
>
> - buck3 {
> + vcc1v8_sys: buck3 {
> regulator-min-microvolt = <500000>;
> regulator-max-microvolt = <1800000>;
> regulator-ramp-delay = <5000>;
> --
> 2.47.2
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
Powered by blists - more mailing lists