| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250924223528.2956771-1-robh@kernel.org>
Date: Wed, 24 Sep 2025 17:35:24 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Richard Cochran <richardcochran@...il.com>,
Gregory CLEMENT <gregory.clement@...tlin.com>,
Marek Behún <kabel@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>
Cc: linux-clk@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org,
netdev@...r.kernel.org
Subject: [PATCH] dt-bindings: pinctrl: Convert marvell,armada-3710-(sb|nb)-pinctrl to DT schema
Convert the marvell,armada3710-(sb|nb)-pinctrl binding to DT schema
format. The binding includes the "marvell,armada-3700-xtal-clock"
subnode which is simple enough to include here.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
.../bindings/clock/armada3700-xtal-clock.txt | 29 ---
.../marvell,armada-3710-xb-pinctrl.yaml | 122 +++++++++++
.../pinctrl/marvell,armada-37xx-pinctrl.txt | 195 ------------------
3 files changed, 122 insertions(+), 224 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-3710-xb-pinctrl.yaml
delete mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
deleted file mode 100644
index 4c0807f28cfa..000000000000
--- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-* Xtal Clock bindings for Marvell Armada 37xx SoCs
-
-Marvell Armada 37xx SoCs allow to determine the xtal clock frequencies by
-reading the gpio latch register.
-
-This node must be a subnode of the node exposing the register address
-of the GPIO block where the gpio latch is located.
-See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
-
-Required properties:
-- compatible : shall be one of the following:
- "marvell,armada-3700-xtal-clock"
-- #clock-cells : from common clock binding; shall be set to 0
-
-Optional properties:
-- clock-output-names : from common clock binding; allows overwrite default clock
- output names ("xtal")
-
-Example:
-pinctrl_nb: pinctrl-nb@...00 {
- compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd";
- reg = <0x13800 0x100>, <0x13C00 0x20>;
-
- xtalclk: xtal-clk {
- compatible = "marvell,armada-3700-xtal-clock";
- clock-output-names = "xtal";
- #clock-cells = <0>;
- };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-3710-xb-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/marvell,armada-3710-xb-pinctrl.yaml
new file mode 100644
index 000000000000..c4d09d8720bd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-3710-xb-pinctrl.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/marvell,armada-3710-xb-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell Armada 37xx SoC pin and gpio controller
+
+maintainers:
+ - Gregory CLEMENT <gregory.clement@...tlin.com>
+ - Marek Behún <kabel@...nel.org>
+ - Miquel Raynal <miquel.raynal@...tlin.com>
+
+description: >
+ Each Armada 37xx SoC come with two pin and gpio controller one for the south
+ bridge and the other for the north bridge.
+
+ Inside this set of register the gpio latch allows exposing some configuration
+ of the SoC and especially the clock frequency of the xtal. Hence, this node is
+ a represent as syscon allowing sharing the register between multiple hardware
+ block.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - marvell,armada3710-sb-pinctrl
+ - marvell,armada3710-nb-pinctrl
+ - const: syscon
+ - const: simple-mfd
+
+ reg:
+ items:
+ - description: pinctrl and GPIO controller registers
+ - description: interrupt controller registers
+
+ gpio:
+ description: GPIO controller subnode
+ type: object
+ additionalProperties: false
+
+ properties:
+ '#gpio-cells':
+ const: 2
+
+ gpio-controller: true
+
+ gpio-ranges:
+ description: Range of pins managed by the GPIO controller
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ interrupts:
+ description: List of interrupt specifiers for the GPIO controller
+
+ required:
+ - '#gpio-cells'
+ - gpio-ranges
+ - gpio-controller
+ - '#interrupt-cells'
+ - interrupt-controller
+ - interrupts
+
+ xtal-clk:
+ type: object
+ additionalProperties: false
+
+ properties:
+ compatible:
+ const: marvell,armada-3700-xtal-clock
+
+ '#clock-cells':
+ const: 0
+
+ clock-output-names: true
+
+patternProperties:
+ '-pins$':
+ $ref: pinmux-node.yaml#
+ additionalProperties: false
+
+ properties:
+ groups:
+ enum: [ emmc_nb, i2c1, i2c2, jtag, mii_col, onewire, pcie1,
+ pcie1_clkreq, pcie1_wakeup, pmic0, pmic1, ptp, ptp_clk,
+ ptp_trig, pwm0, pwm1, pwm2, pwm3, rgmii, sdio0, sdio_sb, smi,
+ spi_cs1, spi_cs2, spi_cs3, spi_quad, uart1, uart2,
+ usb2_drvvbus1, usb32_drvvbus ]
+
+ function:
+ enum: [ drvbus, emmc, gpio, i2c, jtag, led, mii, mii_err, onewire,
+ pcie, pmic, ptp, pwm, sdio, smi, spi, uart ]
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl_sb: pinctrl@...00 {
+ compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd";
+ reg = <0x18800 0x100>, <0x18C00 0x20>;
+
+ gpio {
+ #gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_sb 0 0 29>;
+ gpio-controller;
+ interrupts =
+ <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
deleted file mode 100644
index ecec514b3155..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ /dev/null
@@ -1,195 +0,0 @@
-* Marvell Armada 37xx SoC pin and gpio controller
-
-Each Armada 37xx SoC come with two pin and gpio controller one for the
-south bridge and the other for the north bridge.
-
-Inside this set of register the gpio latch allows exposing some
-configuration of the SoC and especially the clock frequency of the
-xtal. Hence, this node is a represent as syscon allowing sharing the
-register between multiple hardware block.
-
-GPIO and pin controller:
-------------------------
-
-Main node:
-
-Refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices, including the meaning
-of the phrase "pin configuration node".
-
-Required properties for pinctrl driver:
-
-- compatible: "marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd"
- for the south bridge
- "marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd"
- for the north bridge
-- reg: The first set of register are for pinctrl/gpio and the second
- set for the interrupt controller
-- interrupts: list of the interrupt use by the gpio
-
-Available groups and functions for the North bridge:
-
-group: jtag
- - pins 20-24
- - functions jtag, gpio
-
-group sdio0
- - pins 8-10
- - functions sdio, gpio
-
-group emmc_nb
- - pins 27-35
- - functions emmc, gpio
-
-group pwm0
- - pin 11 (GPIO1-11)
- - functions pwm, led, gpio
-
-group pwm1
- - pin 12
- - functions pwm, led, gpio
-
-group pwm2
- - pin 13
- - functions pwm, led, gpio
-
-group pwm3
- - pin 14
- - functions pwm, led, gpio
-
-group pmic1
- - pin 7
- - functions pmic, gpio
-
-group pmic0
- - pin 6
- - functions pmic, gpio
-
-group i2c2
- - pins 2-3
- - functions i2c, gpio
-
-group i2c1
- - pins 0-1
- - functions i2c, gpio
-
-group spi_cs1
- - pin 17
- - functions spi, gpio
-
-group spi_cs2
- - pin 18
- - functions spi, gpio
-
-group spi_cs3
- - pin 19
- - functions spi, gpio
-
-group onewire
- - pin 4
- - functions onewire, gpio
-
-group uart1
- - pins 25-26
- - functions uart, gpio
-
-group spi_quad
- - pins 15-16
- - functions spi, gpio
-
-group uart2
- - pins 9-10 and 18-19
- - functions uart, gpio
-
-Available groups and functions for the South bridge:
-
-group usb32_drvvbus0
- - pin 36
- - functions drvbus, gpio
-
-group usb2_drvvbus1
- - pin 37
- - functions drvbus, gpio
-
-group sdio_sb
- - pins 60-65
- - functions sdio, gpio
-
-group rgmii
- - pins 42-53
- - functions mii, gpio
-
-group pcie1
- - pins 39
- - functions pcie, gpio
-
-group pcie1_clkreq
- - pins 40
- - functions pcie, gpio
-
-group pcie1_wakeup
- - pins 41
- - functions pcie, gpio
-
-group smi
- - pins 54-55
- - functions smi, gpio
-
-group ptp
- - pins 56
- - functions ptp, gpio
-
-group ptp_clk
- - pin 57
- - functions ptp, mii
-
-group ptp_trig
- - pin 58
- - functions ptp, mii
-
-group mii_col
- - pin 59
- - functions mii, mii_err
-
-GPIO subnode:
-
-Please refer to gpio.txt in this directory for details of gpio-ranges property
-and the common GPIO bindings used by client devices.
-
-Required properties for gpio driver under the gpio subnode:
-- interrupts: List of interrupt specifier for the controllers interrupt.
-- gpio-controller: Marks the device node as a gpio controller.
-- #gpio-cells: Should be 2. The first cell is the GPIO number and the
- second cell specifies GPIO flags, as defined in
- <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH and
- GPIO_ACTIVE_LOW flags are supported.
-- gpio-ranges: Range of pins managed by the GPIO controller.
-
-Xtal Clock bindings for Marvell Armada 37xx SoCs
-------------------------------------------------
-
-see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
-
-
-Example:
-pinctrl_sb: pinctrl-sb@...00 {
- compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd";
- reg = <0x18800 0x100>, <0x18C00 0x20>;
- gpio {
- #gpio-cells = <2>;
- gpio-ranges = <&pinctrl_sb 0 0 29>;
- gpio-controller;
- interrupts =
- <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- rgmii_pins: mii-pins {
- groups = "rgmii";
- function = "mii";
- };
-
-};
--
2.51.0
Powered by blists - more mailing lists