Message-ID: <c507ec74-cbc4-4b60-b057-23022842d8c5@kernel.org>
Date: Wed, 24 Sep 2025 09:06:21 +0200
From: Hans Verkuil <hverkuil+cisco@...nel.org>
To: Jai Luthra <jai.luthra@...asonboard.com>,
 Hans Verkuil <hverkuil@...nel.org>,
 Mauro Carvalho Chehab <mchehab@...nel.org>,
 Sakari Ailus <sakari.ailus@...ux.intel.com>,
 Laurent Pinchart <laurent.pinchart@...asonboard.com>,
 Tomi Valkeinen <tomi.valkeinen@...asonboard.com>,
 Jacopo Mondi <jacopo.mondi@...asonboard.com>, linux-media@...r.kernel.org
Cc: Ricardo Ribalda <ribalda@...omium.org>,
 Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
 Al Viro <viro@...iv.linux.org.uk>, Ma Ke <make24@...as.ac.cn>,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 01/10] media: v4l2-core: Introduce state management for
 video devices

On 22/09/2025 09:44, Hans Verkuil wrote:
> Hi Jai,
> 
> Apologies that I had no time to review v1, but I'll review v2 today.
> 
> On 19/09/2025 11:55, Jai Luthra wrote:
>> Similar to V4L2 subdev states, introduce state support for video devices
>> to provide a centralized location for storing device state information.
>> This includes the current (active) pixelformat used by the device and
>> the temporary (try) pixelformat used during format negotiation. In the
>> future, this may be extended or subclassed by device drivers to store
>> their internal state variables.
>>
>> Also introduce a flag for drivers that wish to use this state
>> management. When set, the framework automatically allocates the state
>> during device registration and stores a pointer to it within the
>> video_device structure.
>>
>> This change aligns video devices with V4L2 subdevices by storing
>> hardware state in a common framework-allocated structure. This is the
>> first step towards enabling the multiplexing of the underlying hardware
>> by using different software "contexts", each represented by the combined
>> state of all video devices and V4L2 subdevices in a complex media graph.
>>
>> Signed-off-by: Jai Luthra <jai.luthra@...asonboard.com>
>> --
>> Cc: Mauro Carvalho Chehab <mchehab@...nel.org>
>> Cc: Hans Verkuil <hverkuil@...nel.org>
>> Cc: Ricardo Ribalda <ribalda@...omium.org>
>> Cc: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
>> Cc: Al Viro <viro@...iv.linux.org.uk>
>> Cc: Ma Ke <make24@...as.ac.cn>
>> Cc: Jai Luthra <jai.luthra@...asonboard.com>
>> Cc: linux-media@...r.kernel.org
>> Cc: linux-kernel@...r.kernel.org
>> ---
>>  drivers/media/v4l2-core/v4l2-dev.c | 27 +++++++++++++++++++++++++
>>  include/media/v4l2-dev.h           | 40 ++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 67 insertions(+)
>>
>> diff --git a/drivers/media/v4l2-core/v4l2-dev.c b/drivers/media/v4l2-core/v4l2-dev.c
>> index 10a126e50c1ca25b1bd0e9872571261acfc26b39..997255709448510fcd17b6de798a3df99cd7ea09 100644
>> --- a/drivers/media/v4l2-core/v4l2-dev.c
>> +++ b/drivers/media/v4l2-core/v4l2-dev.c
>> @@ -163,6 +163,27 @@ void video_device_release_empty(struct video_device *vdev)
>>  }
>>  EXPORT_SYMBOL(video_device_release_empty);
>>  
>> +struct video_device_state *
>> +__video_device_state_alloc(struct video_device *vdev)
>> +{
>> +	struct video_device_state *state =
>> +		kzalloc(sizeof(struct video_device_state), GFP_KERNEL);
>> +
>> +	if (!state)
>> +		return ERR_PTR(-ENOMEM);
>> +
>> +	state->vdev = vdev;
>> +
>> +	return state;
>> +}
>> +EXPORT_SYMBOL_GPL(__video_device_state_alloc);
>> +
>> +void __video_device_state_free(struct video_device_state *state)
>> +{
>> +	kfree(state);
>> +}
>> +EXPORT_SYMBOL_GPL(__video_device_state_free);
>> +
>>  static inline void video_get(struct video_device *vdev)
>>  {
>>  	get_device(&vdev->dev);
>> @@ -939,6 +960,10 @@ int __video_register_device(struct video_device *vdev,
>>  	spin_lock_init(&vdev->fh_lock);
>>  	INIT_LIST_HEAD(&vdev->fh_list);
>>  
>> +	/* state support */
>> +	if (test_bit(V4L2_FL_USES_STATE, &vdev->flags))
>> +		vdev->state = __video_device_state_alloc(vdev);
>> +
>>  	/* Part 1: check device type */
>>  	switch (type) {
>>  	case VFL_TYPE_VIDEO:
>> @@ -1127,6 +1152,8 @@ void video_unregister_device(struct video_device *vdev)
>>  	clear_bit(V4L2_FL_REGISTERED, &vdev->flags);
>>  	mutex_unlock(&videodev_lock);
>>  	v4l2_event_wake_all(vdev);
>> +	if (test_bit(V4L2_FL_USES_STATE, &vdev->flags))
>> +		__video_device_state_free(vdev->state);
>>  	device_unregister(&vdev->dev);
>>  }
>>  EXPORT_SYMBOL(video_unregister_device);
>> diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
>> index a213c3398dcf60be8c531df87bf40c56b4ad772d..57e4691ef467aa2b0782dd4b8357bd0670643293 100644
>> --- a/include/media/v4l2-dev.h
>> +++ b/include/media/v4l2-dev.h
>> @@ -89,12 +89,18 @@ struct dentry;
>>   *	set by the core when the sub-devices device nodes are registered with
>>   *	v4l2_device_register_ro_subdev_nodes() and used by the sub-device ioctl
>>   *	handler to restrict access to some ioctl calls.
>> + * @V4L2_FL_USES_STATE:
>> + *	indicates that the &struct video_device has state support.
>> + *	The active video and metadata formats are stored in video_device.state,
>> + *	and the try video and metadata formats are stored in v4l2_fh.state.
>> + *	All new drivers should use it.
>>   */
>>  enum v4l2_video_device_flags {
>>  	V4L2_FL_REGISTERED		= 0,
>>  	V4L2_FL_USES_V4L2_FH		= 1,
>>  	V4L2_FL_QUIRK_INVERTED_CROP	= 2,
>>  	V4L2_FL_SUBDEV_RO_DEVNODE	= 3,
>> +	V4L2_FL_USES_STATE		= 4,
>>  };
>>  
>>  /* Priority helper functions */
>> @@ -214,6 +220,17 @@ struct v4l2_file_operations {
>>  	int (*release) (struct file *);
>>  };
>>  
>> +/**
>> + * struct video_device_state - Used for storing video device state information.
>> + *
>> + * @fmt: Format of the capture stream
>> + * @vdev: Pointer to video device
>> + */
>> +struct video_device_state {
>> +	struct v4l2_format fmt;
> 
> While typically a video_device supports only a single video format type, that is
> not always the case. There are the following exceptions:
> 
> 1) M2M devices have both a capture and output video format. However, for M2M devices
>    the state is per-filehandle, so it shouldn't be stored in a video_device_state
>    struct anyway.
> 2) VBI devices can have both a raw and sliced VBI format (either capture or output)

This is actually wrong. VBI devices are either in raw or in sliced VBI mode, you can't
have both at the same time. So a single v4l2_format in the state is fine for this.

Regards,

	Hans

> 3) AFAIK non-M2M video devices can have both a video and meta format. That may have
>    changed, I'm not 100% certain about this.
> 4) video devices can also support an OVERLAY or OUTPUT_OVERLAY format (rare)
> 
> V4L2_CAP_VIDEO_OVERLAY is currently only used in
> drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c, so once that driver
> disappears we can drop video overlay support for capture devices.
> 
> 2-4 are all quite rare, but 1 is very common. But for such devices the state
> wouldn't be in video_device anyway.
> 
> But it would be nice if the same struct can be used in both m2m devices and non-m2m
> devices. It's just stored either in struct v4l2_fh or struct video_device. It would
> give a lot of opportunities for creating helper functions to make the life for
> driver developers easier.
> 
> Regards,
> 
> 	Hans
> 
>> +	struct video_device *vdev;
>> +};
>> +
>>  /*
>>   * Newer version of video_device, handled by videodev2.c
>>   *	This version moves redundant code from video device code to
>> @@ -238,6 +255,7 @@ struct v4l2_file_operations {
>>   * @queue: &struct vb2_queue associated with this device node. May be NULL.
>>   * @prio: pointer to &struct v4l2_prio_state with device's Priority state.
>>   *	 If NULL, then v4l2_dev->prio will be used.
>> + * @state: &struct video_device_state, holds the active state for the device.
>>   * @name: video device name
>>   * @vfl_type: V4L device type, as defined by &enum vfl_devnode_type
>>   * @vfl_dir: V4L receiver, transmitter or m2m
>> @@ -283,6 +301,7 @@ struct video_device {
>>  	struct vb2_queue *queue;
>>  
>>  	struct v4l2_prio_state *prio;
>> +	struct video_device_state *state;
>>  
>>  	/* device info */
>>  	char name[64];
>> @@ -546,6 +565,27 @@ static inline int video_is_registered(struct video_device *vdev)
>>  	return test_bit(V4L2_FL_REGISTERED, &vdev->flags);
>>  }
>>  
>> +/** __video_device_state_alloc - allocate video device state structure
>> + *
>> + * @vdev: pointer to struct video_device
>> + *
>> + * .. note::
>> + *
>> + *	This function is meant to be used only inside the V4L2 core.
>> + */
>> +struct video_device_state *
>> +__video_device_state_alloc(struct video_device *vdev);
>> +
>> +/** __video_device_state_free - free video device state structure
>> + *
>> + * @state: pointer to the state to be freed
>> + *
>> + * .. note::
>> + *
>> + *	This function is meant to be used only inside the V4L2 core.
>> + */
>> +void __video_device_state_free(struct video_device_state *state);
>> +
>>  /**
>>   * v4l2_debugfs_root - returns the dentry of the top-level "v4l2" debugfs dir
>>   *
>>
> 
> 

Powered by blists - more mailing lists