linux-kernel - Re: [PATCH 15/20] arm64: dts: qcom: kaanapali-mtp: Enable modem

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <iexa64nrdqmwitvunl3inmgtmhufphl3p4p2kbvhgcsb2y6l7j@5tpt23yd6jzh>
Date: Thu, 25 Sep 2025 05:10:13 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Jingyi Wang <jingyi.wang@....qualcomm.com>
Cc: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        aiqun.yu@....qualcomm.com, tingwei.zhang@....qualcomm.com,
        trilok.soni@....qualcomm.com, yijie.yang@....qualcomm.com
Subject: Re: [PATCH 15/20] arm64: dts: qcom: kaanapali-mtp: Enable modem

On Wed, Sep 24, 2025 at 05:17:32PM -0700, Jingyi Wang wrote:
> Enable the MODEM on Kaanapali MTP board.
> 
> Signed-off-by: Jingyi Wang <jingyi.wang@....qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
> index 2949579481a9..8d1b3278389e 100644
> --- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
> @@ -1263,6 +1263,14 @@ &remoteproc_cdsp {
>  	status = "okay";
>  };
>  
> +&remoteproc_mpss {
> +	firmware-name = "qcom/kaanapali/modem.mbn",
> +			"qcom/kaanapali/modem_dtb.mbn";
> +
> +	/* Modem crashes after some time for OEMPD load failure */
> +	status = "fail";

I can't call this 'enable'. Why is it crashing?

> +};
> +
>  &remoteproc_soccp {
>  	firmware-name = "qcom/kaanapali/soccp.mbn",
>  			"qcom/kaanapali/soccp_dtb.mbn";
> 
> -- 
> 2.25.1
> 

-- 
With best wishes
Dmitry