linux-kernel - [PATCH 2/3] arm64: dts: qcom: qcs8300: add Display Serial Interface device nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250925053602.4105329-3-quic_amakhija@quicinc.com>
Date: Thu, 25 Sep 2025 11:06:01 +0530
From: Ayushi Makhija <quic_amakhija@...cinc.com>
To: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc: Ayushi Makhija <quic_amakhija@...cinc.com>, robdclark@...il.com,
        dmitry.baryshkov@....qualcomm.com, sean@...rly.run,
        marijn.suijten@...ainline.org, andersson@...nel.org, robh@...nel.org,
        robh+dt@...nel.org, krzk+dt@...nel.org, konradybcio@...nel.org,
        conor+dt@...nel.org, andrzej.hajda@...el.com,
        neil.armstrong@...aro.org, rfoss@...nel.org,
        Laurent.pinchart@...asonboard.com, jonas@...boo.se,
        jernej.skrabec@...il.com, quic_rajeevny@...cinc.com,
        quic_vproddut@...cinc.com, quic_jesszhan@...cinc.com
Subject: [PATCH 2/3] arm64: dts: qcom: qcs8300: add Display Serial Interface device nodes

Add device tree nodes for the DSI0 controller with their corresponding
PHY found on Qualcomm QCS8300 SoC.

Signed-off-by: Ayushi Makhija <quic_amakhija@...cinc.com>
---
 arch/arm64/boot/dts/qcom/qcs8300.dtsi | 95 ++++++++++++++++++++++++++-
 1 file changed, 94 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index e0e1f63fc45b..834ae0522f2f 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,qcs8300-gcc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sa8775p-camcc.h>
@@ -4854,6 +4855,13 @@ dpu_intf0_out: endpoint {
 							remote-endpoint = <&mdss_dp0_in>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
 				};
 
 				mdp_opp_table: opp-table {
@@ -4881,6 +4889,89 @@ opp-650000000 {
 				};
 			};
 
+			mdss_dsi0: dsi@...4000 {
+				compatible =  "qcom,sa8775p-dsi-ctrl","qcom,mdss-dsi-ctrl";
+				reg = <0x0 0x0ae94000 0x0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc MDSS_DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&gcc GCC_DISP_HF_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+
+				assigned-clocks = <&dispcc MDSS_DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc MDSS_DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				operating-points-v2 = <&mdss_dsi_opp_table>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+
+				mdss_dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@...4400 {
+				compatible = "qcom,sa8775p-dsi-phy-5nm";
+				reg = <0x0 0x0ae94400 0x0 0x200>,
+				      <0x0 0x0ae94600 0x0 0x280>,
+				      <0x0 0x0ae94900 0x0 0x27c>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
 			mdss_dp0_phy: phy@...2a00 {
 				compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy";
 
@@ -5008,7 +5099,9 @@ dispcc: clock-controller@...0000 {
 				 <&mdss_dp0_phy 0>,
 				 <&mdss_dp0_phy 1>,
 				 <0>, <0>,
-				 <0>, <0>, <0>, <0>;
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <0>, <0>;
 			power-domains = <&rpmhpd RPMHPD_MMCX>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
-- 
2.34.1