linux-kernel - [PATCH v2 14/24] arm64: dts: qcom: Update the pmh0110.dtsi for Glymur

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250925-v3_glymur_introduction-v2-14-8e1533a58d2d@oss.qualcomm.com>
Date: Thu, 25 Sep 2025 11:58:20 +0530
From: Pankaj Patil <pankaj.patil@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Pankaj Patil <pankaj.patil@....qualcomm.com>,
        Kamal Wadhwa <kamal.wadhwa@....qualcomm.com>
Subject: [PATCH v2 14/24] arm64: dts: qcom: Update the pmh0110.dtsi for
 Glymur

From: Kamal Wadhwa <kamal.wadhwa@....qualcomm.com>

Add multiple instance of PMH0110 DT node, one for each assigned
SID for this PMIC on the spmi_bus0 and spmi_bus1 on the Glymur
CRD.

Take care to avoid compilation issue with the existing nodes by
gaurding each PMH0110 nodes with `#ifdef` for its corresponding
SID macro. So that only the nodes which have the their SID macro
defined are the only ones picked for compilation.

Signed-off-by: Kamal Wadhwa <kamal.wadhwa@....qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@....qualcomm.com>
---
 arch/arm64/boot/dts/qcom/pmh0110.dtsi | 66 ++++++++++++++++++++++++++++++++++-
 1 file changed, 65 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/pmh0110.dtsi b/arch/arm64/boot/dts/qcom/pmh0110.dtsi
index b99c33cba8860f1852231db33a127646c08c1e23..4a5c66e5c9fbc35cedb67601f4568844dc41fbea 100644
--- a/arch/arm64/boot/dts/qcom/pmh0110.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmh0110.dtsi
@@ -7,6 +7,8 @@
 #include <dt-bindings/spmi/spmi.h>
 
 &spmi_bus0 {
+
+#ifdef PMH0110_D_E0_SID
 	pmh0110_d_e0: pmic@...0110_D_E0_SID {
 		compatible = "qcom,pmh0110", "qcom,spmi-pmic";
 		reg = <PMH0110_D_E0_SID SPMI_USID>;
@@ -31,13 +33,14 @@ pmh0110_d_e0_gpios: gpio@...0 {
 			#interrupt-cells = <2>;
 		};
 	};
+#endif
 
+#ifdef PMH0110_F_E0_SID
 	pmh0110_f_e0: pmic@...0110_F_E0_SID {
 		compatible = "qcom,pmh0110", "qcom,spmi-pmic";
 		reg = <PMH0110_F_E0_SID SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		status = "disabled";
 
 		pmh0110_f_e0_temp_alarm: temp-alarm@a00 {
 			compatible = "qcom,spmi-temp-alarm";
@@ -56,7 +59,9 @@ pmh0110_f_e0_gpios: gpio@...0 {
 			#interrupt-cells = <2>;
 		};
 	};
+#endif
 
+#ifdef PMH0110_G_E0_SID
 	pmh0110_g_e0: pmic@...0110_G_E0_SID {
 		compatible = "qcom,pmh0110", "qcom,spmi-pmic";
 		reg = <PMH0110_G_E0_SID SPMI_USID>;
@@ -81,7 +86,36 @@ pmh0110_g_e0_gpios: gpio@...0 {
 			#interrupt-cells = <2>;
 		};
 	};
+#endif
+
+#ifdef PMH0110_H_E0_SID
+	pmh0110_h_e0: pmic@...0110_H_E0_SID {
+		compatible = "qcom,pmh0110", "qcom,spmi-pmic";
+		reg = <PMH0110_H_E0_SID SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		pmh0110_h_e0_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <PMH0110_H_E0_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmh0110_h_e0_gpios: gpio@...0 {
+			compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmh0110_h_e0_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+#endif
 
+#ifdef PMH0110_I_E0_SID
 	pmh0110_i_e0: pmic@...0110_I_E0_SID {
 		compatible = "qcom,pmh0110", "qcom,spmi-pmic";
 		reg = <PMH0110_I_E0_SID SPMI_USID>;
@@ -106,4 +140,34 @@ pmh0110_i_e0_gpios: gpio@...0 {
 			#interrupt-cells = <2>;
 		};
 	};
+#endif
+};
+
+&spmi_bus1 {
+#ifdef PMH0110_F_E1_SID
+	pmh0110_f_e1: pmic@...0110_F_E1_SID {
+		compatible = "qcom,pmh0110", "qcom,spmi-pmic";
+		reg = <PMH0110_F_E1_SID SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		pmh0110_f_e1_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <PMH0110_F_E1_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmh0110_f_e1_gpios: gpio@...0 {
+			compatible = "qcom,pmh0110-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmh0110_f_e1_gpios 0 0 14>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+#endif
 };

-- 
2.34.1