| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250925-v3_glymur_introduction-v1-24-24b601bbecc0@oss.qualcomm.com>
Date: Thu, 25 Sep 2025 12:02:32 +0530
From: Pankaj Patil <pankaj.patil@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Pankaj Patil <pankaj.patil@....qualcomm.com>,
Sibi Sankar <sibi.sankar@....qualcomm.com>
Subject: [PATCH 24/24] arm64: dts: qcom: glymur: Add remoteprocs
From: Sibi Sankar <sibi.sankar@....qualcomm.com>
Add remoteproc PAS loader for ADSP, CDSP and SoCCP with its SMP2P nodes.
Signed-off-by: Sibi Sankar <sibi.sankar@....qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@....qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur-crd.dts | 21 +++
arch/arm64/boot/dts/qcom/glymur.dtsi | 234 ++++++++++++++++++++++++++++++++
2 files changed, 255 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
index 100519aa5a7cd905285d3aa41ebe5f63ae00aeef..17c8f1a4f4061303982a210b7690783c96ef80b2 100644
--- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
+++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
@@ -548,6 +548,27 @@ nvme_reg_en: nvme-reg-en-state {
};
};
+&remoteproc_adsp {
+ firmware-name = "qcom/glymur/adsp.mbn",
+ "qcom/glymur/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/glymur/cdsp.mbn",
+ "qcom/glymur/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_soccp {
+ firmware-name = "qcom/glymur/soccp.mbn",
+ "qcom/glymur/soccp_dtb.mbn";
+
+ status = "okay";
+};
+
&tlmm {
pcie5_default: pcie5-default-state {
clkreq-n-pins {
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index c48d3a70820e551822c5322761528159da127ca6..a131cd6c3d9e7f14ed1c4aef4b68e1860cc3bca5 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -782,6 +782,82 @@ smem_mem: smem-region@...00000 {
};
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc GLYMUR_MPROC_LPASS
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc GLYMUR_MPROC_LPASS IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <443>, <429>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
+
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-cdsp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc GLYMUR_MPROC_CDSP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc GLYMUR_MPROC_CDSP IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <94>, <432>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <5>;
+
+ smp2p_cdsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ smp2p_cdsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ smp2p-soccp {
+ compatible = "qcom,smp2p";
+
+ interrupts-extended = <&ipcc GLYMUR_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_SMP2P
+ IRQ_TYPE_EDGE_RISING>;
+
+ mboxes = <&ipcc GLYMUR_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_SMP2P>;
+
+ qcom,smem = <617>, <616>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <19>;
+
+ soccp_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+
+ soccp_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
clk_virt: interconnect-0 {
compatible = "qcom,glymur-clk-virt";
#interconnect-cells = <2>;
@@ -2417,6 +2493,59 @@ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
};
};
+ remoteproc_soccp: remoteproc-soccp@...000 {
+ compatible = "qcom,glymur-soccp-pas", "qcom,kaanapali-soccp-pas";
+ reg = <0x0 0x00d00000 0x0 0x200000>;
+
+ interrupts-extended = <&intc GIC_SPI 167 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 9 IRQ_TYPE_EDGE_RISING>,
+ <&soccp_smp2p_in 10 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "pong",
+ "wake-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MX>;
+ power-domain-names = "cx",
+ "mx";
+
+ memory-region = <&soccp_mem>,
+ <&soccpdtb_mem>;
+
+ qcom,smem-states = <&soccp_smp2p_out 0>,
+ <&soccp_smp2p_out 10>,
+ <&soccp_smp2p_out 9>,
+ <&soccp_smp2p_out 8>;
+ qcom,smem-state-names = "stop",
+ "wakeup",
+ "sleep",
+ "ping";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc GLYMUR_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc GLYMUR_MPROC_SOCCP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+ qcom,remote-pid = <19>;
+ label = "soccp";
+
+ };
+ };
+
usb_mp_hsphy0: phy@...000 {
compatible = "qcom,glymur-m31-eusb2-phy",
"qcom,sm8750-m31-eusb2-phy";
@@ -2944,6 +3073,57 @@ pcie5_phy: phy@...0000 {
status = "disabled";
};
+ remoteproc_adsp: remoteproc@...0000 {
+ compatible = "qcom,glymur-adsp-pas", "qcom,sm8550-adsp-pas";
+ reg = <0x0 0x06800000 0x0 0x10000>;
+
+ iommus = <&apps_smmu 0x1000 0x0>;
+
+ interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_LCX>,
+ <&rpmhpd RPMHPD_LMX>;
+ power-domain-names = "lcx",
+ "lmx";
+
+ interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc GLYMUR_MPROC_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc GLYMUR_MPROC_LPASS
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "lpass";
+ qcom,remote-pid = <2>;
+ };
+ };
+
tcsr_mutex: hwlock@...0000 {
compatible = "qcom,tcsr-mutex";
reg = <0x0 0x01f40000 0x0 0x20000>;
@@ -5311,6 +5491,60 @@ nsp_noc: interconnect@...c0000 {
#interconnect-cells = <2>;
};
+ remoteproc_cdsp: remoteproc@...00000 {
+ compatible = "qcom,glymur-cdsp-pas", "qcom,sm8550-cdsp-pas";
+ reg = <0x0 0x32300000 0x0 0x10000>;
+
+ iommus = <&apps_smmu 0x2000 0x400>;
+
+ interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_cdsp_in 7 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog",
+ "fatal",
+ "ready",
+ "handover",
+ "stop-ack",
+ "shutdown-ack";
+
+ clocks = <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "xo";
+
+ power-domains = <&rpmhpd RPMHPD_CX>,
+ <&rpmhpd RPMHPD_MXC>,
+ <&rpmhpd RPMHPD_NSP>;
+ power-domain-names = "cx",
+ "mxc",
+ "nsp";
+
+ interconnects = <&nsp_noc MASTER_CDSP_PROC QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+
+ memory-region = <&cdsp_mem>,
+ <&q6_cdsp_dtb_mem>;
+
+ qcom,qmp = <&aoss_qmp>;
+
+ qcom,smem-states = <&smp2p_cdsp_out 0>;
+ qcom,smem-state-names = "stop";
+
+ status = "disabled";
+
+ glink-edge {
+ interrupts-extended = <&ipcc GLYMUR_MPROC_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc GLYMUR_MPROC_CDSP
+ IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ label = "cdsp";
+ qcom,remote-pid = <5>;
+ };
+ };
+
sram: sram@...08000 {
compatible = "mmio-sram";
reg = <0x0 0x81e08600 0x0 0x300>;
--
2.34.1
Powered by blists - more mailing lists