| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250924-knp-dts-v1-14-3fdbc4b9e1b1@oss.qualcomm.com>
Date: Wed, 24 Sep 2025 17:17:31 -0700
From: Jingyi Wang <jingyi.wang@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, aiqun.yu@....qualcomm.com,
tingwei.zhang@....qualcomm.com, trilok.soni@....qualcomm.com,
yijie.yang@....qualcomm.com,
Jingyi Wang <jingyi.wang@....qualcomm.com>
Subject: [PATCH 14/20] arm64: dts: qcom: kaanapali-mtp: Enable more
features
Enable more features on Kaanapali MTP boards including PMIC peripherals,
bus, SDHCI, remoteprocs, USB, PCIE, WLAN and Bluetooth.
Written with help from Jyothi Kumar Seerapu(added bus), Ronak Raheja
(added USB), Manish Pandey(added SDHCI), Jishnu Prakash(added PMIC),
Qiang Yu(added PCIE), Yijie Yang(Added WLAN) and Zijun Hu(Added Bluetooth).
Signed-off-by: Jingyi Wang <jingyi.wang@....qualcomm.com>
---
arch/arm64/boot/dts/qcom/kaanapali-mtp.dts | 663 +++++++++++++++++++++++++++++
1 file changed, 663 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
index 9cf3158e2712..2949579481a9 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/kaanapali-mtp.dts
@@ -5,9 +5,23 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "kaanapali.dtsi"
+#define PMH0110_D_E0_SID 3
+#define PMH0110_F_E0_SID 5
+#define PMH0110_G_E0_SID 6
+#define PMH0110_I_E0_SID 8
+#define PMH0104_J_E1_SID 9
+
+#include "pmk8850.dtsi"
+#include "pmh0101.dtsi"
+#include "pmh0110.dtsi"
+#include "pmh0104.dtsi"
+
/ {
model = "Qualcomm Technologies, Inc. Kaanapali MTP";
compatible = "qcom,kaanapali-mtp", "qcom,kaanapali";
@@ -15,6 +29,7 @@ / {
aliases {
serial0 = &uart7;
+ serial1 = &uart18;
};
chosen {
@@ -52,6 +67,304 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
clock-div = <2>;
};
};
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&key_vol_up_default>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ wakeup-source;
+ };
+ };
+
+ thermal-zones {
+ pmh0101-thermal {
+ polling-delay-passive = <100>;
+
+ thermal-sensors = <&pmh0101_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pmh0104-thermal {
+ polling-delay-passive = <100>;
+
+ thermal-sensors = <&pmh0104_j_e1_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pmh0110-d-thermal {
+ polling-delay-passive = <100>;
+
+ thermal-sensors = <&pmh0110_d_e0_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pmh0110-f-thermal {
+ polling-delay-passive = <100>;
+
+ thermal-sensors = <&pmh0110_f_e0_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pmh0110-g-thermal {
+ polling-delay-passive = <100>;
+
+ thermal-sensors = <&pmh0110_g_e0_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pmh0110-i-thermal {
+ polling-delay-passive = <100>;
+
+ thermal-sensors = <&pmh0110_i_e0_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pmd8028-thermal {
+ polling-delay-passive = <100>;
+ thermal-sensors = <&pmd8028_temp_alarm>;
+
+ trips {
+ pmd8028_trip0: trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ pmd8028_trip1: trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pmih0108-thermal {
+ polling-delay-passive = <100>;
+ thermal-sensors = <&pmih0108_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pmr735d-thermal {
+ polling-delay-passive = <100>;
+
+ thermal-sensors = <&pmr735d_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pm8010-m-thermal {
+ polling-delay-passive = <100>;
+
+ thermal-sensors = <&pm8010_m_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+
+ pm8010-n-thermal {
+ polling-delay-passive = <100>;
+
+ thermal-sensors = <&pm8010_n_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
+ };
+ };
+ };
+ };
+
+ wcn7850-pmu {
+ compatible = "qcom,wcn7850-pmu";
+
+ pinctrl-0 = <&bt_default>, <&sw_ctrl_default>, <&wlan_en>;
+ pinctrl-names = "default";
+
+ bt-enable-gpios = <&pmh0104_j_e1_gpios 5 GPIO_ACTIVE_HIGH>;
+ wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+
+ vdd-supply = <&vreg_s2j_0p8>;
+ vddio-supply = <&vreg_l2g_1p8>;
+ vddio1p2-supply = <&vreg_l3g_1p2>;
+ vddaon-supply = <&vreg_s7g_0p9>;
+ vdddig-supply = <&vreg_s1j_0p8>;
+ vddrfa1p2-supply = <&vreg_s7f_1p2>;
+ vddrfa1p8-supply = <&vreg_s8f_1p8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p8: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p8";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&apps_rsc {
@@ -674,6 +987,304 @@ vreg_l7n_3p3: ldo7 {
};
};
+&pmh0110_d_e0 {
+ status = "okay";
+};
+
+&pmh0110_f_e0 {
+ status = "okay";
+};
+
+&pmh0110_g_e0 {
+ status = "okay";
+};
+
+&pmh0110_i_e0 {
+ status = "okay";
+};
+
+&spmi_bus1 {
+ pmd8028: pmic@4 {
+ compatible = "qcom,pmd8028", "qcom,spmi-pmic";
+ reg = <0x4 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmd8028_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmd8028_gpios: gpio@...0 {
+ compatible = "qcom,pmd8028-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmd8028_gpios 0 0 4>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pmih0108: pmic@7 {
+ compatible = "qcom,pmih0108", "qcom,spmi-pmic";
+ reg = <0x7 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmih0108_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmih0108_gpios: gpio@...0 {
+ compatible = "qcom,pmih0108-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmih0108_gpios 0 0 18>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pmih0108_eusb2_repeater: phy@...0 {
+ compatible = "qcom,pm8550b-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ vdd18-supply = <&vreg_l15b_1p8>;
+ vdd3-supply = <&vreg_l5b_3p1>;
+ };
+ };
+
+ pmr735d: pmic@a {
+ compatible = "qcom,pmr735d", "qcom,spmi-pmic";
+ reg = <0xa SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmr735d_temp_alarm: temp-alarm@a00 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0xa00>;
+ interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+
+ pmr735d_gpios: gpio@...0 {
+ compatible = "qcom,pmr735d-gpio", "qcom,spmi-gpio";
+ reg = <0x8800>;
+ gpio-controller;
+ gpio-ranges = <&pmr735d_gpios 0 0 2>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+
+ pm8010_m: pmic@c {
+ compatible = "qcom,pm8010", "qcom,spmi-pmic";
+ reg = <0xc SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8010_m_temp_alarm: temp-alarm@...0 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0xc 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+
+ pm8010_n: pmic@d {
+ compatible = "qcom,pm8010", "qcom,spmi-pmic";
+ reg = <0xd SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pm8010_n_temp_alarm: temp-alarm@...0 {
+ compatible = "qcom,spmi-temp-alarm";
+ reg = <0x2400>;
+ interrupts = <0xd 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
+ #thermal-sensor-cells = <0>;
+ };
+ };
+};
+
+&pmh0101_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ function-enumerator = <0>;
+ color = <LED_COLOR_ID_YELLOW>;
+ led-sources = <1>, <4>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <2000000>;
+ flash-max-timeout-us = <1280000>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ function-enumerator = <1>;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <2>, <3>;
+ led-max-microamp = <500000>;
+ flash-max-microamp = <2000000>;
+ flash-max-timeout-us = <1280000>;
+ };
+};
+
+&pmh0101_pwm {
+ status = "okay";
+
+ multi-led {
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STATUS;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
+&tlmm {
+ wlan_en: wlan-en-state {
+ pins = "gpio16";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+
+ sw_ctrl_default: sw-ctrl-default-state {
+ pins = "gpio18";
+ function = "gpio";
+ bias-pull-down;
+ };
+
+ key_vol_up_default: key-vol-up-default-state {
+ pins = "gpio101";
+ function = "gpio";
+ output-disable;
+ bias-pull-up;
+ };
+
+ pcie0_default_state: pcie0-default-state {
+ clkreq-n-pins {
+ pins = "gpio103";
+ function = "pcie0_clk_req_n";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-n-pins {
+ pins = "gpio102";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ wake-n-pins {
+ pins = "gpio104";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
+&pcie0 {
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l3i_0p8>;
+ vdda-pll-supply = <&vreg_l1d_1p2>;
+
+ status = "okay";
+};
+
+&pcieport0 {
+ wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+ wifi@0 {
+ compatible = "pci17cb,1107";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/kaanapali/adsp.mbn",
+ "qcom/kaanapali/adsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/kaanapali/cdsp.mbn",
+ "qcom/kaanapali/cdsp_dtb.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_soccp {
+ firmware-name = "qcom/kaanapali/soccp.mbn",
+ "qcom/kaanapali/soccp_dtb.mbn";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
+
+ vmmc-supply = <&vreg_l9b_2p9>;
+ vqmmc-supply = <&vreg_l8b_1p8>;
+
+ bus-width = <4>;
+ no-sdio;
+ no-mmc;
+
+ pinctrl-0 = <&sdc2_default>;
+ pinctrl-1 = <&sdc2_sleep>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
&tlmm {
gpio-reserved-ranges = <36 4>, /* NFC eSE SPI */
<74 1>, /* eSE */
@@ -685,6 +1296,36 @@ &uart7 {
status = "okay";
};
+&pmh0104_j_e1_gpios {
+ bt_default: bt-default-state {
+ pins = "gpio5";
+ function = "normal";
+ input-disable;
+ output-enable;
+ output-low;
+ bias-disable;
+ power-source = <1>;
+ };
+};
+
+&uart18 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn7850-bt";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+ max-speed = <3200000>;
+ };
+};
+
&ufs_mem_hc {
reset-gpios = <&tlmm 217 GPIO_ACTIVE_LOW>;
@@ -702,3 +1343,25 @@ &ufs_mem_phy {
status = "okay";
};
+
+&usb_1 {
+ dr_mode = "peripheral";
+
+ status = "okay";
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l4f_0p8>;
+ vdda12-supply = <&vreg_l1d_1p2>;
+
+ phys = <&pmih0108_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&vreg_l1d_1p2>;
+ vdda-pll-supply = <&vreg_l4f_0p8>;
+
+ status = "okay";
+};
--
2.25.1
Powered by blists - more mailing lists