| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250924-knp-dts-v1-19-3fdbc4b9e1b1@oss.qualcomm.com>
Date: Wed, 24 Sep 2025 17:17:36 -0700
From: Jingyi Wang <jingyi.wang@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, aiqun.yu@....qualcomm.com,
tingwei.zhang@....qualcomm.com, trilok.soni@....qualcomm.com,
yijie.yang@....qualcomm.com,
Jingyi Wang <jingyi.wang@....qualcomm.com>,
Hangxiang Ma <hangxiang.ma@....qualcomm.com>
Subject: [PATCH 19/20] arm64: dts: qcom: kaanapali: Add support for camss
From: Hangxiang Ma <hangxiang.ma@....qualcomm.com>
Add support for the camera subsystem on the Kaanapali Qualcomm SoC. This
includes bringing up the CSIPHY, CSID, VFE/RDI interfaces.
Kaanapali provides
- 3 x VFE, 5 RDI per VFE
- 2 x VFE Lite, 4 RDI per VFE
- 3 x CSID
- 2 x CSID Lite
- 6 x CSI PHY
Written with help from Taniya Das(added camera clk nodes).
Signed-off-by: Hangxiang Ma <hangxiang.ma@....qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@....qualcomm.com>
---
arch/arm64/boot/dts/qcom/kaanapali.dtsi | 502 ++++++++++++++++++++++++++++++++
1 file changed, 502 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/kaanapali.dtsi b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
index 6aa8dedbb196..a95274fa3c31 100644
--- a/arch/arm64/boot/dts/qcom/kaanapali.dtsi
+++ b/arch/arm64/boot/dts/qcom/kaanapali.dtsi
@@ -3,6 +3,8 @@
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/
+#include <dt-bindings/clock/qcom,kaanapali-cambistmclkcc.h>
+#include <dt-bindings/clock/qcom,kaanapali-camcc.h>
#include <dt-bindings/clock/qcom,kaanapali-gcc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/clock/qcom,sm8750-tcsr.h>
@@ -1673,6 +1675,25 @@ aggre_noc: interconnect@...0000 {
<&rpmhcc RPMH_IPA_CLK>;
};
+ cambistmclkcc: clock-controller@...0000 {
+ compatible = "qcom,kaanapali-cambistmclkcc";
+ reg = <0x0 0x1760000 0x0 0x6000>;
+
+ clocks = <&gcc GCC_CAM_BIST_MCLK_AHB_CLK>,
+ <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&sleep_clk>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
mmss_noc: interconnect@...0000 {
compatible = "qcom,kaanapali-mmss-noc";
reg = <0x0 0x01780000 0x0 0x5b800>;
@@ -3380,6 +3401,295 @@ usb_dp_qmpphy_dp_in: endpoint {
};
};
+ camss: isp@...3000 {
+ compatible = "qcom,kaanapali-camss";
+
+ reg = <0x0 0x09253000 0x0 0x5e80>,
+ <0x0 0x09263000 0x0 0x5e80>,
+ <0x0 0x09273000 0x0 0x5e80>,
+ <0x0 0x092d3000 0x0 0x3880>,
+ <0x0 0x092e7000 0x0 0x3880>,
+ <0x0 0x09523000 0x0 0x2000>,
+ <0x0 0x09525000 0x0 0x2000>,
+ <0x0 0x09527000 0x0 0x2000>,
+ <0x0 0x09529000 0x0 0x2000>,
+ <0x0 0x0952b000 0x0 0x2000>,
+ <0x0 0x0952d000 0x0 0x2000>,
+ <0x0 0x09151000 0x0 0x20000>,
+ <0x0 0x09171000 0x0 0x20000>,
+ <0x0 0x09191000 0x0 0x20000>,
+ <0x0 0x092dc000 0x0 0x1300>,
+ <0x0 0x092f0000 0x0 0x1300>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ clocks = <&camcc CAM_CC_CAMNOC_NRT_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_AXI_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_0_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_1_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_TFE_2_MAIN_CLK>,
+ <&camcc CAM_CC_CAMNOC_RT_IFE_LITE_CLK>,
+ <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CAM_TOP_FAST_AHB_CLK>,
+ <&camcc CAM_CC_CSID_CLK>,
+ <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+ <&camcc CAM_CC_CSIPHY0_CLK>,
+ <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY1_CLK>,
+ <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY2_CLK>,
+ <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY3_CLK>,
+ <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY4_CLK>,
+ <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+ <&camcc CAM_CC_CSIPHY5_CLK>,
+ <&camcc CAM_CC_CSI5PHYTIMER_CLK>,
+ <&gcc GCC_CAMERA_HF_AXI_CLK>,
+ <&camcc CAM_CC_QDSS_DEBUG_XO_CLK>,
+ <&camcc CAM_CC_TFE_0_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_0_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_TFE_1_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_1_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_TFE_2_MAIN_CLK>,
+ <&camcc CAM_CC_TFE_2_MAIN_FAST_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CLK>,
+ <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+ clock-names = "camnoc_nrt_axi",
+ "camnoc_rt_axi",
+ "camnoc_rt_vfe0",
+ "camnoc_rt_vfe1",
+ "camnoc_rt_vfe2",
+ "camnoc_rt_vfe_lite",
+ "cam_top_ahb",
+ "cam_top_fast_ahb",
+ "csid",
+ "csid_csiphy_rx",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "csiphy4",
+ "csiphy4_timer",
+ "csiphy5",
+ "csiphy5_timer",
+ "gcc_hf_axi",
+ "qdss_debug_xo",
+ "vfe0",
+ "vfe0_fast_ahb",
+ "vfe1",
+ "vfe1_fast_ahb",
+ "vfe2",
+ "vfe2_fast_ahb",
+ "vfe_lite",
+ "vfe_lite_ahb",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid";
+
+ interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 457 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite0",
+ "csid_lite1",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "csiphy4",
+ "csiphy5",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite0",
+ "vfe_lite1";
+
+ interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_0_mnoc";
+
+ iommus = <&apps_smmu 0x1c00 0x00>;
+
+ power-domains = <&camcc CAM_CC_TFE_0_GDSC>,
+ <&camcc CAM_CC_TFE_1_GDSC>,
+ <&camcc CAM_CC_TFE_2_GDSC>,
+ <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ power-domain-names = "tfe0",
+ "tfe1",
+ "tfe2",
+ "top";
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ };
+
+ port@1 {
+ reg = <1>;
+ };
+
+ port@2 {
+ reg = <2>;
+ };
+
+ port@3 {
+ reg = <3>;
+ };
+ };
+ };
+
+ cci0: cci@...b000 {
+ compatible = "qcom,kaanapali-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0941b000 0x0 0x1000>;
+ interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CCI_0_CLK>;
+ clock-names = "cam_top_ahb", "cci";
+ pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+ pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci0_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci0_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <1000000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci1: cci@...c000 {
+ compatible = "qcom,kaanapali-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0941c000 0x0 0x1000>;
+ interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CCI_1_CLK>;
+ clock-names = "cam_top_ahb", "cci";
+ pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+ pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci1_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci1_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ cci2: cci@...d000 {
+ compatible = "qcom,kaanapali-cci", "qcom,msm8996-cci";
+ reg = <0x0 0x0941d000 0x0 0x1000>;
+ interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+ power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+ clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+ <&camcc CAM_CC_CCI_2_CLK>;
+ clock-names = "cam_top_ahb", "cci";
+ pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+ pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+ pinctrl-names = "default", "sleep";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cci2_i2c0: i2c-bus@0 {
+ reg = <0>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ cci2_i2c1: i2c-bus@1 {
+ reg = <1>;
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ camcc: clock-controller@...d000 {
+ compatible = "qcom,kaanapali-camcc";
+ reg = <0x0 0x956d000 0x0 0x80000>;
+
+ clocks = <&gcc GCC_CAMERA_AHB_CLK>,
+ <&bi_tcxo_div2>,
+ <&bi_tcxo_ao_div2>,
+ <&sleep_clk>;
+
+ power-domains = <&rpmhpd RPMHPD_MMCX>,
+ <&rpmhpd RPMHPD_MXC>;
+ required-opps = <&rpmhpd_opp_low_svs>,
+ <&rpmhpd_opp_low_svs>;
+
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+
usb_1: usb@...0000 {
compatible = "qcom,kaanapali-dwc3", "qcom,snps-dwc3";
reg = <0x0 0x0a600000 0x0 0xfc100>;
@@ -3653,6 +3963,198 @@ tlmm: pinctrl@...0000 {
#interrupt-cells = <2>;
wakeup-parent = <&pdc>;
+ cci0_0_default: cci0-0-default-state {
+ sda-pins {
+ pins = "gpio109";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio110";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci0_0_sleep: cci0-0-sleep-state {
+ sda-pins {
+ pins = "gpio109";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio110";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci0_1_default: cci0-1-default-state {
+ sda-pins {
+ pins = "gpio111";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio112";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci0_1_sleep: cci0-1-sleep-state {
+ sda-pins {
+ pins = "gpio111";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio112";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci1_0_default: cci1-0-default-state {
+ sda-pins {
+ pins = "gpio113";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio114";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci1_0_sleep: cci1-0-sleep-state {
+ sda-pins {
+ pins = "gpio113";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio114";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci1_1_default: cci1-1-default-state {
+ sda-pins {
+ pins = "gpio107";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio160";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci1_1_sleep: cci1-1-sleep-state {
+ sda-pins {
+ pins = "gpio107";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio160";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci2_0_default: cci2-0-default-state {
+ sda-pins {
+ pins = "gpio108";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio149";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci2_0_sleep: cci2-0-sleep-state {
+ sda-pins {
+ pins = "gpio108";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio149";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ cci2_1_default: cci2-1-default-state {
+ sda-pins {
+ pins = "gpio115";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ scl-pins {
+ pins = "gpio116";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+
+ cci2_1_sleep: cci2-1-sleep-state {
+ sda-pins {
+ pins = "gpio115";
+ function = "cci_i2c_sda";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ scl-pins {
+ pins = "gpio116";
+ function = "cci_i2c_scl";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
hub_i2c0_data_clk: hub-i2c0-data-clk-state {
/* SDA, SCL */
pins = "gpio66", "gpio67";
--
2.25.1
Powered by blists - more mailing lists