[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250925-s6e3fc2x01-v1-3-9293016768f7@ixit.cz>
Date: Thu, 25 Sep 2025 11:12:49 +0200
From: David Heidelberg via B4 Relay <devnull+david.ixit.cz@...nel.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <jessica.zhang@....qualcomm.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Thierry Reding <thierry.reding@...il.com>, Sam Ravnborg <sam@...nborg.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Casey Connolly <casey.connolly@...aro.org>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
phone-devel@...r.kernel.org, David Heidelberg <david@...t.cz>
Subject: [PATCH 3/8] arm64: dts: qcom: sdm845-oneplus: Describe panel vci
and poc supplies
From: Casey Connolly <casey.connolly@...aro.org>
There are two additional supplies used by the panel, both are GPIO
controlled and are left enabled by the bootloader for continuous splash.
Previously these were (incorrectly) modelled as pinctrl. Describe them
properly so that the panel can control them.
Fixes: 288ef8a42612 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Casey Connolly <casey.connolly@...aro.org>
Signed-off-by: David Heidelberg <david@...t.cz>
---
.../arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 28 +++++++++++++++++++++-
1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index dcfffb271fcf3146aeabda8fc19e61b456b76887..aff5e80c1eba43e830991c2afd53b6322893cd27 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -162,6 +162,30 @@ ts_1p8_supply: ts-1p8-regulator {
enable-active-high;
regulator-boot-on;
};
+
+ panel_vci_3v3: panel-vci-3v3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "LCD_VCI_3V";
+
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ panel_vddi_poc_1p8: panel-vddi-poc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDI_POC";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
};
&adsp_pas {
@@ -429,6 +453,8 @@ display_panel: panel@0 {
reg = <0>;
vddio-supply = <&vreg_l14a_1p88>;
+ vci-supply = <&panel_vci_3v3>;
+ poc-supply = <&panel_vddi_poc_1p8>;
reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
@@ -818,7 +844,7 @@ ts_default_pins: ts-int-state {
};
panel_reset_pins: panel-reset-state {
- pins = "gpio6", "gpio25", "gpio26";
+ pins = "gpio6";
function = "gpio";
drive-strength = <8>;
bias-disable;
--
2.51.0
Powered by blists - more mailing lists