[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20250925085929.2581749-1-primoz.fiser@norik.com>
Date: Thu, 25 Sep 2025 10:59:29 +0200
From: Primoz Fiser <primoz.fiser@...ik.com>
To: Shenghao Ding <shenghao-ding@...com>,
Kevin Lu <kevin-lu@...com>,
Baojun Xu <baojun.xu@...com>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>
Cc: linux-sound@...r.kernel.org,
linux-kernel@...r.kernel.org,
upstream@...ts.phytec.de
Subject: [PATCH] ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007
The problem of having class-D initialization sequence in probe using
regmap_register_patch() is that it will do hardware register writes
immediately after being called as it bypasses regcache. Afterwards, in
aic3x_init() we also perform codec soft reset, rendering class-D init
sequence pointless. This issue is even more apparent when using reset
GPIO line, since in that case class-D amplifier initialization fails
with "Failed to init class D: -5" message as codec is already held in
reset state after requesting the reset GPIO and hence hardware I/O
fails with -EIO errno.
Thus move class-D amplifier initialization sequence from probe function
to aic3x_set_power() just before the usual regcache sync. Use bypassed
regmap_multi_reg_write_bypassed() function to make sure, class-D init
sequence is performed in proper order as described in the datasheet.
Signed-off-by: Primoz Fiser <primoz.fiser@...ik.com>
---
sound/soc/codecs/tlv320aic3x.c | 32 ++++++++++++++------------------
1 file changed, 14 insertions(+), 18 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index f1649df19738..eea8ca285f8e 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -121,6 +121,16 @@ static const struct reg_default aic3x_reg[] = {
{ 108, 0x00 }, { 109, 0x00 },
};
+static const struct reg_sequence aic3007_class_d[] = {
+ /* Class-D speaker driver init; datasheet p. 46 */
+ { AIC3X_PAGE_SELECT, 0x0D },
+ { 0xD, 0x0D },
+ { 0x8, 0x5C },
+ { 0x8, 0x5D },
+ { 0x8, 0x5C },
+ { AIC3X_PAGE_SELECT, 0x00 },
+};
+
static bool aic3x_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
@@ -1393,6 +1403,10 @@ static int aic3x_set_power(struct snd_soc_component *component, int power)
gpiod_set_value(aic3x->gpio_reset, 0);
}
+ if (aic3x->model == AIC3X_MODEL_3007)
+ regmap_multi_reg_write_bypassed(aic3x->regmap, aic3007_class_d,
+ ARRAY_SIZE(aic3007_class_d));
+
/* Sync reg_cache with the hardware */
regcache_cache_only(aic3x->regmap, false);
regcache_sync(aic3x->regmap);
@@ -1723,17 +1737,6 @@ static void aic3x_configure_ocmv(struct device *dev, struct aic3x_priv *aic3x)
}
}
-
-static const struct reg_sequence aic3007_class_d[] = {
- /* Class-D speaker driver init; datasheet p. 46 */
- { AIC3X_PAGE_SELECT, 0x0D },
- { 0xD, 0x0D },
- { 0x8, 0x5C },
- { 0x8, 0x5D },
- { 0x8, 0x5C },
- { AIC3X_PAGE_SELECT, 0x00 },
-};
-
int aic3x_probe(struct device *dev, struct regmap *regmap, kernel_ulong_t driver_data)
{
struct aic3x_priv *aic3x;
@@ -1823,13 +1826,6 @@ int aic3x_probe(struct device *dev, struct regmap *regmap, kernel_ulong_t driver
aic3x_configure_ocmv(dev, aic3x);
- if (aic3x->model == AIC3X_MODEL_3007) {
- ret = regmap_register_patch(aic3x->regmap, aic3007_class_d,
- ARRAY_SIZE(aic3007_class_d));
- if (ret != 0)
- dev_err(dev, "Failed to init class D: %d\n", ret);
- }
-
ret = devm_snd_soc_register_component(dev, &soc_component_dev_aic3x, &aic3x_dai, 1);
if (ret)
return ret;
--
2.34.1
Powered by blists - more mailing lists