lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250926085956.2346179-3-quic_mkuntuma@quicinc.com>
Date: Fri, 26 Sep 2025 14:29:54 +0530
From: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@...cinc.com>
To: dmitry.baryshkov@....qualcomm.com, marijn.suijten@...ainline.org,
        swboyd@...omium.org, mripard@...nel.org, abel.vesa@...aro.org,
        andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
        krzk+dt@...nel.org, conor+dt@...nel.org, robin.clark@....qualcomm.com,
        jessica.zhang@....qualcomm.com, abhinav.kumar@...ux.dev,
        sean@...rly.run, airlied@...il.com, simona@...ll.ch,
        alex.vinarskis@...il.com
Cc: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@...cinc.com>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        freedreno@...ts.freedesktop.org, dri-devel@...ts.freedesktop.org,
        quic_rajeevny@...cinc.com, quic_vproddut@...cinc.com,
        quic_riteshk@...cnic.com, quic_amitsi@...cnic.com
Subject: [PATCH 2/4] arm64: dts: qcom: lemans: add mdss1 displayPort device nodes

Add device tree nodes for the mdss1 DPTX0 and DPTX1 controllers
with their corresponding PHYs.

Signed-off-by: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@...cinc.com>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 245 +++++++++++++++++++++++++++
 1 file changed, 245 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index a78daa827fcd..4af9a439d68f 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -6839,6 +6839,27 @@ mdss1_mdp: display-controller@...01000 {
 				interrupt-parent = <&mdss1>;
 				interrupts = <0>;
 
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu1_intf0_out: endpoint {
+							remote-endpoint = <&mdss1_dp0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu1_intf4_out: endpoint {
+							remote-endpoint = <&mdss1_dp1_in>;
+						};
+					};
+				};
+
 				mdss1_mdp_opp_table: opp-table {
 					compatible = "operating-points-v2";
 
@@ -6863,6 +6884,228 @@ opp-650000000 {
 					};
 				};
 			};
+
+			mdss1_dp0_phy: phy@...c2a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+
+				reg = <0x0 0x220c2a00 0x0 0x200>,
+				      <0x0 0x220c2200 0x0 0xd0>,
+				      <0x0 0x220c2600 0x0 0xd0>,
+				      <0x0 0x220c2000 0x0 0x1c8>;
+
+				clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss1_dp1_phy: phy@...c5a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+
+				reg = <0x0 0x220c5a00 0x0 0x200>,
+				      <0x0 0x220c5200 0x0 0xd0>,
+				      <0x0 0x220c5600 0x0 0xd0>,
+				      <0x0 0x220c5000 0x0 0x1c8>;
+
+				clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss1_dp0: displayport-controller@...54000 {
+				compatible = "qcom,sa8775p-dp";
+
+				reg = <0x0 0x22154000 0x0 0x104>,
+				      <0x0 0x22154200 0x0 0x0c0>,
+				      <0x0 0x22155000 0x0 0x770>,
+				      <0x0 0x22156000 0x0 0x09c>,
+				      <0x0 0x22157000 0x0 0x09c>,
+				      <0x0 0x22158000 0x0 0x09c>,
+				      <0x0 0x22159000 0x0 0x09c>,
+				      <0x0 0x2215a000 0x0 0x23c>,
+				      <0x0 0x2215b000 0x0 0x23c>;
+
+				interrupt-parent = <&mdss1>;
+				interrupts = <12>;
+
+				clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel",
+					      "stream_2_pixel",
+					      "stream_3_pixel";
+				assigned-clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>,
+							 <&mdss1_dp0_phy 1>,
+							 <&mdss1_dp0_phy 1>,
+							 <&mdss1_dp0_phy 1>,
+							 <&mdss1_dp0_phy 1>;
+				phys = <&mdss1_dp0_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&mdss1_dp_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss1_dp0_in: endpoint {
+							remote-endpoint = <&dpu1_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss1_dp0_out: endpoint { };
+					};
+				};
+
+				mdss1_dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss1_dp1: displayport-controller@...5c000 {
+				compatible = "qcom,sa8775p-dp";
+
+				reg = <0x0 0x2215c000 0x0 0x104>,
+				      <0x0 0x2215c200 0x0 0x0c0>,
+				      <0x0 0x2215d000 0x0 0x770>,
+				      <0x0 0x2215e000 0x0 0x09c>,
+				      <0x0 0x2215f000 0x0 0x09c>,
+				      <0x0 0x22160000 0x0 0x09c>,
+				      <0x0 0x22161000 0x0 0x09c>,
+				      <0x0 0x22162000 0x0 0x23c>,
+				      <0x0 0x22163000 0x0 0x23c>;
+
+				interrupt-parent = <&mdss1>;
+				interrupts = <13>;
+
+				clocks = <&dispcc1 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
+				assigned-clocks = <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc1 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>,
+							 <&mdss1_dp1_phy 1>,
+							 <&mdss1_dp1_phy 1>;
+				phys = <&mdss1_dp1_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&mdss1_dp1_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss1_dp1_in: endpoint {
+							remote-endpoint = <&dpu1_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss1_dp1_out: endpoint { };
+					};
+				};
+
+				mdss1_dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
 		};
 
 		dispcc1: clock-controller@...00000 {
@@ -6872,6 +7115,8 @@ dispcc1: clock-controller@...00000 {
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&sleep_clk>,
+				 <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>,
+				 <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>,
 				 <0>, <0>, <0>, <0>,
 				 <0>, <0>, <0>, <0>;
 			power-domains = <&rpmhpd SA8775P_MMCX>;
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ