| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2238241.irdbgypaU6@rafael.j.wysocki>
Date: Fri, 26 Sep 2025 17:47:14 +0200
From: "Rafael J. Wysocki" <rafael@...nel.org>
To: Linux PM <linux-pm@...r.kernel.org>,
Jonathan Cameron <jonathan.cameron@...wei.com>
Cc: Takashi Iwai <tiwai@...e.de>, LKML <linux-kernel@...r.kernel.org>,
Linux PCI <linux-pci@...r.kernel.org>,
Alex Williamson <alex.williamson@...hat.com>,
Bjorn Helgaas <helgaas@...nel.org>, Zhang Qilong <zhangqilong3@...wei.com>,
Ulf Hansson <ulf.hansson@...aro.org>, Frank Li <Frank.Li@....com>,
Dhruva Gole <d-gole@...com>
Subject:
[PATCH v4 1/3] PM: runtime: Add auto-cleanup macros for "resume and get"
operations
From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
It is generally useful to be able to automatically drop a device's
runtime PM usage counter incremented by runtime PM operations that
resume a device and bump up its usage counter [1].
To that end, add guard definition macros allowing pm_runtime_put()
and pm_runtime_put_autosuspend() to be used for the auto-cleanup in
those cases.
Simply put, a piece of code like below:
pm_runtime_get_sync(dev);
.....
pm_runtime_put(dev);
return 0;
can be transformed with guard() like:
guard(pm_runtime_active)(dev);
.....
return 0;
(see the pm_runtime_put() call is gone).
However, it is better to do proper error handling in the majority of
cases, so doing something like this instead of the above is recommended:
ACQUIRE(pm_runtime_active_try, pm)(dev);
if (ACQUIRE_ERR(pm_runtime_active_try, &pm))
return -ENXIO;
.....
return 0;
In all of the cases in which runtime PM is known to be enabled for the
given device or the device can be regarded as operational (and so it can
be accessed) with runtime PM disabled, a piece of code like:
ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
.....
pm_runtime_put(dev);
return 0;
can be changed as follows:
ACQUIRE(pm_runtime_active_try, pm)(dev);
ret = ACQUIRE_ERR(pm_runtime_active_try, &pm);
if (ret < 0)
return ret;
.....
return 0;
(again, see the pm_runtime_put() call is gone).
Still, if the device cannot be accessed unless runtime PM has been
enabled for it, the CLASS(pm_runtime_get_active_enabled) variant
needs to be used, that is (in the context of the example above):
ACQUIRE(pm_runtime_active_try_enabled, pm)(dev);
ret = ACQUIRE_ERR(pm_runtime_active_try_enabled, &pm);
if (ret < 0)
return ret;
.....
return 0;
When the original code calls pm_runtime_put_autosuspend(), use one
of the "auto" guard variants, pm_runtime_active_auto/_try/_enabled,
so for example, a piece of code like:
ret = pm_runtime_resume_and_get(dev);
if (ret < 0)
return ret;
.....
pm_runtime_put_autosuspend(dev);
return 0;
will become:
ACQUIRE(pm_runtime_active_auto_try_enabled, pm)(dev);
ret = ACQUIRE_ERR(pm_runtime_active_auto_try_enabled, &pm);
if (ret < 0)
return ret;
.....
return 0;
Note that the cases in which the return value of pm_runtime_get_sync()
is checked can also be handled with the help of the new class macros.
For example, a piece of code like:
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
pm_runtime_put(dev);
return ret;
}
.....
pm_runtime_put(dev);
return 0;
can be rewritten as:
ACQUIRE(pm_runtime_active_auto_try_enabled, pm)(dev);
ret = ACQUIRE_ERR(pm_runtime_active_auto_try_enabled, &pm);
if (ret < 0)
return ret;
.....
return 0;
or pm_runtime_get_active_try can be used if transparent handling of
disabled runtime PM is desirable.
Link: https://lore.kernel.org/linux-pm/878qimv24u.wl-tiwai@suse.de/ [1]
Link: https://lore.kernel.org/linux-pm/20250926150613.000073a4@huawei.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
v3 -> v4:
* Use guard definition macros instead of raw DEFINE_CLASS() (Jonathan)
* Change pm_runtime_get_active() helper definition to return an int instead
of a pointer
* Update changelog to match the new code
v2 -> v3:
* Two more class definitions for the case in which resume errors can be
neglected.
* Update of new code comments (for more clarity).
* Changelog update.
v1 -> v2:
* Rename the new classes and the new static inline helper.
* Add two classes for handling disabled runtime PM.
* Expand the changelog.
* Adjust the subject.
---
drivers/base/power/runtime.c | 2 +
include/linux/pm_runtime.h | 44 ++++++++++++++++++++++++++++++++++---------
2 files changed, 37 insertions(+), 9 deletions(-)
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -796,6 +796,8 @@ static int rpm_resume(struct device *dev
if (dev->power.runtime_status == RPM_ACTIVE &&
dev->power.last_status == RPM_ACTIVE)
retval = 1;
+ else if (rpmflags & RPM_TRANSPARENT)
+ goto out;
else
retval = -EACCES;
}
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -21,6 +21,7 @@
#define RPM_GET_PUT 0x04 /* Increment/decrement the
usage_count */
#define RPM_AUTO 0x08 /* Use autosuspend_delay */
+#define RPM_TRANSPARENT 0x10 /* Succeed if runtime PM is disabled */
/*
* Use this for defining a set of PM operations to be used in all situations
@@ -511,6 +512,19 @@ static inline int pm_runtime_get_sync(st
return __pm_runtime_resume(dev, RPM_GET_PUT);
}
+static inline int pm_runtime_get_active(struct device *dev, int rpmflags)
+{
+ int ret;
+
+ ret = __pm_runtime_resume(dev, RPM_GET_PUT | rpmflags);
+ if (ret < 0) {
+ pm_runtime_put_noidle(dev);
+ return ret;
+ }
+
+ return 0;
+}
+
/**
* pm_runtime_resume_and_get - Bump up usage counter of a device and resume it.
* @dev: Target device.
@@ -521,15 +535,7 @@ static inline int pm_runtime_get_sync(st
*/
static inline int pm_runtime_resume_and_get(struct device *dev)
{
- int ret;
-
- ret = __pm_runtime_resume(dev, RPM_GET_PUT);
- if (ret < 0) {
- pm_runtime_put_noidle(dev);
- return ret;
- }
-
- return 0;
+ return pm_runtime_get_active(dev, 0);
}
/**
@@ -606,6 +612,26 @@ static inline int pm_runtime_put_autosus
return __pm_runtime_put_autosuspend(dev);
}
+DEFINE_GUARD(pm_runtime_active, struct device *,
+ pm_runtime_get_sync(_T), pm_runtime_put(_T));
+DEFINE_GUARD(pm_runtime_active_auto, struct device *,
+ pm_runtime_get_sync(_T), pm_runtime_put_autosuspend(_T));
+/*
+ * Use the following guards with ACQUIRE()/ACQUIRE_ERR().
+ *
+ * The difference between the "_try" and "_try_enabled" variants is that the
+ * former do not produce an error when runtime PM is disabled for the given
+ * device.
+ */
+DEFINE_GUARD_COND(pm_runtime_active, _try,
+ pm_runtime_get_active(_T, RPM_TRANSPARENT))
+DEFINE_GUARD_COND(pm_runtime_active, _try_enabled,
+ pm_runtime_resume_and_get(_T))
+DEFINE_GUARD_COND(pm_runtime_active_auto, _try,
+ pm_runtime_get_active(_T, RPM_TRANSPARENT))
+DEFINE_GUARD_COND(pm_runtime_active_auto, _try_enabled,
+ pm_runtime_resume_and_get(_T))
+
/**
* pm_runtime_put_sync - Drop device usage counter and run "idle check" if 0.
* @dev: Target device.
Powered by blists - more mailing lists