| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <f1d6028e-b94c-46f7-9828-99829e7bb9c7@gmail.com>
Date: Sat, 27 Sep 2025 17:06:33 +0800
From: Tianling Shen <cnsztl@...il.com>
To: Diederik de Haas <didi.debian@...ow.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Heiko Stuebner <heiko@...ech.de>,
Dragan Simic <dsimic@...jaro.org>, Jonas Karlman <jonas@...boo.se>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: rockchip: Add devicetree for the
FriendlyElec NanoPi R76S
On 2025/9/27 15:37, Diederik de Haas wrote:
> On Sat Sep 27, 2025 at 3:19 AM CEST, Tianling Shen wrote:
>> On 2025/9/27 0:07, Diederik de Haas wrote:
>>> On Mon Sep 22, 2025 at 11:15 AM CEST, Tianling Shen wrote:
>>>> The NanoPi R76S (as "R76S") is an open-sourced mini IoT gateway
>>>> device with two 2.5G, designed and developed by FriendlyElec.
>>>>
>>>> Signed-off-by: Tianling Shen <cnsztl@...il.com>
>>>> ---
>>>> arch/arm64/boot/dts/rockchip/Makefile | 1 +
>>>> .../boot/dts/rockchip/rk3576-nanopi-r76s.dts | 860 ++++++++++++++++++
>>>> 2 files changed, 861 insertions(+)
>>>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts
>>>>
>>>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
>>>> index ad684e3831bc..2d4a1e29db6f 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>>>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>>>> @@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-armsom-sige5-v1.2-wifibt.dtbo
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-evb1-v10.dtb
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-luckfox-omni3576.dtb
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-m5.dtb
>>>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-nanopi-r76s.dtb
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-roc-pc.dtb
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3576-rock-4d.dtb
>>>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3582-radxa-e52c.dtb
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts
>>>> new file mode 100644
>>>> index 000000000000..731789a69677
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3576-nanopi-r76s.dts
>>>> @@ -0,0 +1,860 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
>>>> +/*
>>>> + * Copyright (c) 2025 FriendlyElec Computer Tech. Co., Ltd.
>>>> + * (http://www.friendlyelec.com)
>>>> + *
>>>> + * Copyright (c) 2025 Tianling Shen <cnsztl@...il.com>
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +#include <dt-bindings/gpio/gpio.h>
>>>> +#include <dt-bindings/input/input.h>
>>>> +#include <dt-bindings/leds/common.h>
>>>> +#include <dt-bindings/pinctrl/rockchip.h>
>>>> +#include <dt-bindings/soc/rockchip,vop2.h>
>>>> +
>>>> +#include "rk3576.dtsi"
>>>> +
>>>> +/ {
>>>> + model = "FriendlyElec NanoPi R76S";
>>>> + compatible = "friendlyarm,nanopi-r76s", "rockchip,rk3576";
>>>> +
>>>> + aliases {
>>>> + mmc0 = &sdhci;
>>>> + mmc1 = &sdmmc;
>>>> + mmc2 = &sdio;
>>>> + };
>>>> +
>>>> + chosen {
>>>> + stdout-path = "serial0:1500000n8";
>>>> + };
>>>> +
>>>> + gpio-keys {
>>>> + compatible = "gpio-keys";
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&reset_button_pin>;
>>>> +
>>>> + button-reset {
>>>> + label = "reset";
>>>> + gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_LOW>;
>>>> + debounce-interval = <50>;
>>>> + linux,code = <KEY_RESTART>;
>>>> + wakeup-source;
>>>> + };
>>>> + };
>>>> +
>>>> + gpio-leds {
>>>> + compatible = "gpio-leds";
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>;
>>>
>>> It is recommended to use the labels in the schematics to define the
>>> pinctl nodes (and thus their references). In quite a lot of cases that's
>>> indeed the case, but not for gpio-keys (USER_BUT) or these gpio-leds
>>> pinctls.
>>
>> I cannot find any specific naming rules from the gpio-keys[1] and
>> gpio-leds[2] bindings, did I miss any update?
>>
>> I think this naming matches the current practice at least in rockchip's
>> dt tree.
>
> There is an unofficial rule/aim:
> https://lore.kernel.org/linux-rockchip/5360173.ktpJ11cQ8Q@diego/
> But granted, there is 'some' inconsistency.
>
> And used in f.e.
> https://lore.kernel.org/linux-rockchip/20250727144409.327740-4-jonas@kwiboo.se/
>
> Where you can just copy the pinctrl labels from the dts[i] and paste
> that in the schematic document and you're instantly at the right place.
> Which is the exact purpose of that rule/aim.
>
Oh I see, thanks for the explanation and information, I will update them
in v2.
>> 1.
>> https://www.kernel.org/doc/Documentation/devicetree/bindings/input/gpio-keys.yaml
>> 2.
>> https://www.kernel.org/doc/Documentation/devicetree/bindings/leds/leds-gpio.yaml
>>
>>>
>>>> +
>>>> + led-0 {
>>>> + color = <LED_COLOR_ID_GREEN>;
>>>> + function = LED_FUNCTION_LAN;
>>>> + gpios = <&gpio2 RK_PB0 GPIO_ACTIVE_HIGH>;
>>>> + };
>>>> +
>>>> + power_led: led-1 {
>>>
>>> power_led is never referenced, so you can drop it.
>>>
>>
>> This will be used by some downstream projects but I'm fine to remove it
>> here.
>
> I'm guessing OpenWrt and I have no problem to accomodate them, but I
> don't know if that should be present in the upstream dts file. And if
> so, whether that should be mentioned in the commit message (or not).
> AFAIUI OpenWrt patches the (power-)LED definition anyway.
>
Let's drop it here then ;)
Thanks,
Tianling.
> Cheers,
> Diederik
>
>>>> + color = <LED_COLOR_ID_RED>;
>>>> + function = LED_FUNCTION_POWER;
>>>> + gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_HIGH>;
>>>> + linux,default-trigger = "heartbeat";
>>>> + };
>>>> +
>>>> + led-2 {
>>>> + color = <LED_COLOR_ID_GREEN>;
>>>> + function = LED_FUNCTION_WAN;
>>>> + gpios = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
>>>> + };
>>>> + };
>>>> +
>>>> + hdmi-con {
>>>> + compatible = "hdmi-connector";
>>>> + hdmi-pwr-supply = <&vcc5v_hdmi_tx>;
>>>> + type = "a";
>>>> +
>>>> + port {
>>>> + hdmi_con_in: endpoint {
>>>> + remote-endpoint = <&hdmi_out_con>;
>>>> + };
>>>> + };
>>>> + };
>>>> +
>>>> + sdio_pwrseq: sdio-pwrseq {
>>>> + compatible = "mmc-pwrseq-simple";
>>>> + clocks = <&hym8563>;
>>>> + clock-names = "ext_clock";
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&wifi_reg_on_h>;
>>>> + post-power-on-delay-ms = <200>;
>>>> + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
>>>> + };
>>>> +
>>>> + vcc5v_dcin: regulator-vcc5v-dcin {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <5000000>;
>>>> + regulator-max-microvolt = <5000000>;
>>>> + regulator-name = "vcc5v_dcin";
>>>> + };
>>>> +
>>>> + vcc5v_hdmi_tx: regulator-vcc5v-hdmi-tx {
>>>> + compatible = "regulator-fixed";
>>>> + enable-active-high;
>>>> + gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&hdmi_tx_on_h>;
>>>> + regulator-min-microvolt = <5000000>;
>>>> + regulator-max-microvolt = <5000000>;
>>>> + regulator-name = "vcc5v_hdmi_tx";
>>>> + vin-supply = <&vcc5v0_sys_s5>;
>>>> + };
>>>> +
>>>> + vcc3v3_rtc_s5: regulator-vcc3v3-rtc-s5 {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <3300000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-name = "vcc3v3_rtc_s5";
>>>> + vin-supply = <&vcc5v0_sys_s5>;
>>>> + };
>>>> +
>>>> + vcc5v0_device_s0: regulator-vcc5v0-device-s0 {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <5000000>;
>>>> + regulator-max-microvolt = <5000000>;
>>>> + regulator-name = "vcc5v0_device_s0";
>>>> + vin-supply = <&vcc5v_dcin>;
>>>> + };
>>>> +
>>>> + vcc5v0_sys_s5: regulator-vcc5v0-sys-s5 {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <5000000>;
>>>> + regulator-max-microvolt = <5000000>;
>>>> + regulator-name = "vcc5v0_sys_s5";
>>>> + vin-supply = <&vcc5v_dcin>;
>>>> + };
>>>> +
>>>> + vcc5v0_usb_otg0: regulator-vcc5v0-usb-otg0 {
>>>> + compatible = "regulator-fixed";
>>>> + enable-active-high;
>>>> + gpios = <&gpio0 RK_PD1 GPIO_ACTIVE_HIGH>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&usb_otg0_pwren_h>;
>>>> + regulator-min-microvolt = <5000000>;
>>>> + regulator-max-microvolt = <5000000>;
>>>> + regulator-name = "vcc5v0_usb_otg0";
>>>> + vin-supply = <&vcc5v0_sys_s5>;
>>>> + };
>>>> +
>>>> + vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <1100000>;
>>>> + regulator-max-microvolt = <1100000>;
>>>> + regulator-name = "vcc_1v1_nldo_s3";
>>>> + vin-supply = <&vcc5v0_sys_s5>;
>>>> + };
>>>> +
>>>> + vcc_1v8_s0: regulator-vcc-1v8-s0 {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-name = "vcc_1v8_s0";
>>>> + vin-supply = <&vcc_1v8_s3>;
>>>> + };
>>>> +
>>>> + vcc_2v0_pldo_s3: regulator-vcc-2v0-pldo-s3 {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <2000000>;
>>>> + regulator-max-microvolt = <2000000>;
>>>> + regulator-name = "vcc_2v0_pldo_s3";
>>>> + vin-supply = <&vcc5v0_sys_s5>;
>>>> + };
>>>> +
>>>> + vcc_3v3_s0: regulator-vcc-3v3-s0 {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <3300000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-name = "vcc_3v3_s0";
>>>> + vin-supply = <&vcc_3v3_s3>;
>>>> + };
>>>> +};
>>>> +
>>>> +&combphy0_ps {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&combphy1_psu {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&cpu_b0 {
>>>> + cpu-supply = <&vdd_cpu_big_s0>;
>>>> +};
>>>> +
>>>> +&cpu_b1 {
>>>> + cpu-supply = <&vdd_cpu_big_s0>;
>>>> +};
>>>> +
>>>> +&cpu_b2 {
>>>> + cpu-supply = <&vdd_cpu_big_s0>;
>>>> +};
>>>> +
>>>> +&cpu_b3 {
>>>> + cpu-supply = <&vdd_cpu_big_s0>;
>>>> +};
>>>> +
>>>> +&cpu_l0 {
>>>> + cpu-supply = <&vdd_cpu_lit_s0>;
>>>> +};
>>>> +
>>>> +&cpu_l1 {
>>>> + cpu-supply = <&vdd_cpu_lit_s0>;
>>>> +};
>>>> +
>>>> +&cpu_l2 {
>>>> + cpu-supply = <&vdd_cpu_lit_s0>;
>>>> +};
>>>> +
>>>> +&cpu_l3 {
>>>> + cpu-supply = <&vdd_cpu_lit_s0>;
>>>> +};
>>>> +
>>>> +&gpu {
>>>> + mali-supply = <&vdd_gpu_s0>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&hdmi {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&hdmi_in {
>>>> + hdmi_in_vp0: endpoint {
>>>> + remote-endpoint = <&vp0_out_hdmi>;
>>>> + };
>>>> +};
>>>> +
>>>> +&hdmi_out {
>>>> + hdmi_out_con: endpoint {
>>>> + remote-endpoint = <&hdmi_con_in>;
>>>> + };
>>>> +};
>>>> +
>>>> +&hdmi_sound {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&hdptxphy {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&i2c1 {
>>>> + status = "okay";
>>>> +
>>>> + pmic@23 {
>>>> + compatible = "rockchip,rk806";
>>>> + reg = <0x23>;
>>>> + #gpio-cells = <2>;
>>>> + gpio-controller;
>>>> + interrupt-parent = <&gpio0>;
>>>> + interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
>>>> + <&rk806_dvs2_null>, <&rk806_dvs3_null>;
>>>> + system-power-controller;
>>>> +
>>>> + vcc1-supply = <&vcc5v0_sys_s5>;
>>>> + vcc2-supply = <&vcc5v0_sys_s5>;
>>>> + vcc3-supply = <&vcc5v0_sys_s5>;
>>>> + vcc4-supply = <&vcc5v0_sys_s5>;
>>>> + vcc5-supply = <&vcc5v0_sys_s5>;
>>>> + vcc6-supply = <&vcc5v0_sys_s5>;
>>>> + vcc7-supply = <&vcc5v0_sys_s5>;
>>>> + vcc8-supply = <&vcc5v0_sys_s5>;
>>>> + vcc9-supply = <&vcc5v0_sys_s5>;
>>>> + vcc10-supply = <&vcc5v0_sys_s5>;
>>>> + vcc11-supply = <&vcc_2v0_pldo_s3>;
>>>> + vcc12-supply = <&vcc5v0_sys_s5>;
>>>> + vcc13-supply = <&vcc_1v1_nldo_s3>;
>>>> + vcc14-supply = <&vcc_1v1_nldo_s3>;
>>>> + vcca-supply = <&vcc5v0_sys_s5>;
>>>> +
>>>> + rk806_dvs1_null: dvs1-null-pins {
>>>> + pins = "gpio_pwrctrl1";
>>>> + function = "pin_fun0";
>>>> + };
>>>> +
>>>> + rk806_dvs1_pwrdn: dvs1-pwrdn-pins {
>>>> + pins = "gpio_pwrctrl1";
>>>> + function = "pin_fun2";
>>>> + };
>>>> +
>>>> + rk806_dvs1_rst: dvs1-rst-pins {
>>>> + pins = "gpio_pwrctrl1";
>>>> + function = "pin_fun3";
>>>> + };
>>>> +
>>>> + rk806_dvs1_slp: dvs1-slp-pins {
>>>> + pins = "gpio_pwrctrl1";
>>>> + function = "pin_fun1";
>>>> + };
>>>> +
>>>> + rk806_dvs2_dvs: dvs2-dvs-pins {
>>>> + pins = "gpio_pwrctrl2";
>>>> + function = "pin_fun4";
>>>> + };
>>>> +
>>>> + rk806_dvs2_gpio: dvs2-gpio-pins {
>>>> + pins = "gpio_pwrctrl2";
>>>> + function = "pin_fun5";
>>>> + };
>>>> +
>>>> + rk806_dvs2_null: dvs2-null-pins {
>>>> + pins = "gpio_pwrctrl2";
>>>> + function = "pin_fun0";
>>>> + };
>>>> +
>>>> + rk806_dvs2_pwrdn: dvs2-pwrdn-pins {
>>>> + pins = "gpio_pwrctrl2";
>>>> + function = "pin_fun2";
>>>> + };
>>>> +
>>>> + rk806_dvs2_rst: dvs2-rst-pins {
>>>> + pins = "gpio_pwrctrl2";
>>>> + function = "pin_fun3";
>>>> + };
>>>> +
>>>> + rk806_dvs2_slp: dvs2-slp-pins {
>>>> + pins = "gpio_pwrctrl2";
>>>> + function = "pin_fun1";
>>>> + };
>>>> +
>>>> + rk806_dvs3_dvs: dvs3-dvs-pins {
>>>> + pins = "gpio_pwrctrl3";
>>>> + function = "pin_fun4";
>>>> + };
>>>> +
>>>> + rk806_dvs3_gpio: dvs3-gpio-pins {
>>>> + pins = "gpio_pwrctrl3";
>>>> + function = "pin_fun5";
>>>> + };
>>>> +
>>>> + rk806_dvs3_null: dvs3-null-pins {
>>>> + pins = "gpio_pwrctrl3";
>>>> + function = "pin_fun0";
>>>> + };
>>>> +
>>>> + rk806_dvs3_pwrdn: dvs3-pwrdn-pins {
>>>> + pins = "gpio_pwrctrl3";
>>>> + function = "pin_fun2";
>>>> + };
>>>> +
>>>> + rk806_dvs3_rst: dvs3-rst-pins {
>>>> + pins = "gpio_pwrctrl3";
>>>> + function = "pin_fun3";
>>>> + };
>>>> +
>>>> + rk806_dvs3_slp: dvs3-slp-pins {
>>>> + pins = "gpio_pwrctrl3";
>>>> + function = "pin_fun1";
>>>> + };
>>>> +
>>>> + regulators {
>>>> + vdd_cpu_big_s0: dcdc-reg1 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-enable-ramp-delay = <400>;
>>>> + regulator-min-microvolt = <550000>;
>>>> + regulator-max-microvolt = <950000>;
>>>> + regulator-name = "vdd_cpu_big_s0";
>>>> + regulator-ramp-delay = <12500>;
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vdd_npu_s0: dcdc-reg2 {
>>>> + regulator-boot-on;
>>>> + regulator-enable-ramp-delay = <400>;
>>>> + regulator-min-microvolt = <550000>;
>>>> + regulator-max-microvolt = <950000>;
>>>> + regulator-name = "vdd_npu_s0";
>>>> + regulator-ramp-delay = <12500>;
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vdd_cpu_lit_s0: dcdc-reg3 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <550000>;
>>>> + regulator-max-microvolt = <950000>;
>>>> + regulator-name = "vdd_cpu_lit_s0";
>>>> + regulator-ramp-delay = <12500>;
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + regulator-suspend-microvolt = <750000>;
>>>> + };
>>>> + };
>>>> +
>>>> + vcc_3v3_s3: dcdc-reg4 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <3300000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-name = "vcc_3v3_s3";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-on-in-suspend;
>>>> + regulator-suspend-microvolt = <3300000>;
>>>> + };
>>>> + };
>>>> +
>>>> + vdd_gpu_s0: dcdc-reg5 {
>>>> + regulator-boot-on;
>>>> + regulator-enable-ramp-delay = <400>;
>>>> + regulator-min-microvolt = <550000>;
>>>> + regulator-max-microvolt = <900000>;
>>>> + regulator-name = "vdd_gpu_s0";
>>>> + regulator-ramp-delay = <12500>;
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + regulator-suspend-microvolt = <850000>;
>>>> + };
>>>> + };
>>>> +
>>>> + vddq_ddr_s0: dcdc-reg6 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-name = "vddq_ddr_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vdd_logic_s0: dcdc-reg7 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <550000>;
>>>> + regulator-max-microvolt = <800000>;
>>>> + regulator-name = "vdd_logic_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vcc_1v8_s3: dcdc-reg8 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-name = "vcc_1v8_s3";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-on-in-suspend;
>>>> + regulator-suspend-microvolt = <1800000>;
>>>> + };
>>>> + };
>>>> +
>>>> + vdd2_ddr_s3: dcdc-reg9 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-name = "vdd2_ddr_s3";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-on-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vdd_ddr_s0: dcdc-reg10 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <550000>;
>>>> + regulator-max-microvolt = <1200000>;
>>>> + regulator-name = "vdd_ddr_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vcca_1v8_s0: pldo-reg1 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-name = "vcca_1v8_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vcca1v8_pldo2_s0: pldo-reg2 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-name = "vcca1v8_pldo2_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vdda_1v2_s0: pldo-reg3 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <1200000>;
>>>> + regulator-max-microvolt = <1200000>;
>>>> + regulator-name = "vdda_1v2_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vcca_3v3_s0: pldo-reg4 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <3300000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-name = "vcca_3v3_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vccio_sd_s0: pldo-reg5 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-name = "vccio_sd_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vcca1v8_pldo6_s3: pldo-reg6 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + regulator-name = "vcca1v8_pldo6_s3";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-on-in-suspend;
>>>> + regulator-suspend-microvolt = <1800000>;
>>>> + };
>>>> + };
>>>> +
>>>> + vdd_0v75_s3: nldo-reg1 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <750000>;
>>>> + regulator-max-microvolt = <750000>;
>>>> + regulator-name = "vdd_0v75_s3";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-on-in-suspend;
>>>> + regulator-suspend-microvolt = <750000>;
>>>> + };
>>>> + };
>>>> +
>>>> + vdda_ddr_pll_s0: nldo-reg2 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <850000>;
>>>> + regulator-max-microvolt = <850000>;
>>>> + regulator-name = "vdda_ddr_pll_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vdda0v75_hdmi_s0: nldo-reg3 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <837500>;
>>>> + regulator-max-microvolt = <837500>;
>>>> + regulator-name = "vdda0v75_hdmi_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vdda_0v85_s0: nldo-reg4 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <850000>;
>>>> + regulator-max-microvolt = <850000>;
>>>> + regulator-name = "vdda_0v85_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> +
>>>> + vdda_0v75_s0: nldo-reg5 {
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + regulator-min-microvolt = <750000>;
>>>> + regulator-max-microvolt = <750000>;
>>>> + regulator-name = "vdda_0v75_s0";
>>>> +
>>>> + regulator-state-mem {
>>>> + regulator-off-in-suspend;
>>>> + };
>>>> + };
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> +&i2c2 {
>>>> + status = "okay";
>>>> +
>>>> + hym8563: rtc@51 {
>>>> + compatible = "haoyu,hym8563";
>>>> + reg = <0x51>;
>>>> + #clock-cells = <0>;
>>>> + clock-output-names = "hym8563";
>>>> + interrupt-parent = <&gpio0>;
>>>> + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&rtc_int_l>;
>>>> + wakeup-source;
>>>> + };
>>>> +};
>>>> +
>>>> +&pcie0 {
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&pcie0_perstn>;
>>>> + reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
>>>> + vpcie3v3-supply = <&vcc_3v3_s3>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&pcie1 {
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&pcie1_perstn>;
>>>> + reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
>>>> + vpcie3v3-supply = <&vcc_3v3_s3>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&pinctrl {
>>>> + bt {
>>>> + bt_reg_on_h: bt-reg-on-h {
>>>> + rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> +
>>>> + bt_wake_host_h: bt-wake-host-h {
>>>> + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
>>>> + };
>>>> +
>>>> + host_wake_bt_h: host-wake-bt-h {
>>>> + rockchip,pins = <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> + };
>>>> +
>>>> + gpio-keys {
>>>> + reset_button_pin: reset-button-pin {
>>>> + rockchip,pins = <4 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> + };
>>>> +
>>>> + gpio-leds {
>>>> + lan_led_pin: lan-led-pin {
>>>> + rockchip,pins = <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
>>>> + };
>>>> +
>>>> + power_led_pin: power-led-pin {
>>>> + rockchip,pins = <2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
>>>> + };
>>>> +
>>>> + wan_led_pin: wan-led-pin {
>>>> + rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
>>>> + };
>>>> + };
>>>> +
>>>> + hdmi {
>>>> + hdmi_tx_on_h: hdmi-tx-on-h {
>>>> + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
>>>> + };
>>>> + };
>>>> +
>>>> + hym8563 {
>>>> + rtc_int_l: rtc-int-l {
>>>> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> + };
>>>> +
>>>> + pcie {
>>>> + pcie0_perstn: pcie0-perstn {
>>>> + rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> +
>>>> + pcie1_perstn: pcie1-perstn {
>>>> + rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
>>>> + };
>>>> + };
>>>> +
>>>> + usb {
>>>> + usb_otg0_pwren_h: usb-otg0-pwren-h {
>>>> + rockchip,pins = <0 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
>>>> + };
>>>> + };
>>>> +
>>>> + wifi {
>>>> + wifi_wake_host_h: wifi-wake-host-h {
>>>> + rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
>>>> + };
>>>> +
>>>> + wifi_reg_on_h: wifi-reg-on-h {
>>>> + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> +&sai6 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&sdmmc {
>>>> + bus-width = <4>;
>>>> + cap-mmc-highspeed;
>>>> + cap-sd-highspeed;
>>>> + disable-wp;
>>>> + no-mmc;
>>>> + no-sdio;
>>>> + sd-uhs-sdr104;
>>>> + vmmc-supply = <&vcc_3v3_s3>;
>>>> + vqmmc-supply = <&vccio_sd_s0>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&sdio {
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> + bus-width = <4>;
>>>> + cap-sd-highspeed;
>>>> + cap-sdio-irq;
>>>> + disable-wp;
>>>> + keep-power-in-suspend;
>>>> + mmc-pwrseq = <&sdio_pwrseq>;
>>>> + no-mmc;
>>>> + no-sd;
>>>> + non-removable;
>>>> + sd-uhs-sdr104;
>>>> + vmmc-supply = <&vcc_3v3_s3>;
>>>> + vqmmc-supply = <&vcc_1v8_s3>;
>>>> + wakeup-source;
>>>> + status = "okay";
>>>> +
>>>> + rtl8822cs: wifi@1 {
>>>> + reg = <1>;
>>>> + interrupt-parent = <&gpio0>;
>>>> + interrupts = <RK_PB0 IRQ_TYPE_LEVEL_HIGH>;
>>>> + interrupt-names = "host-wake";
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&wifi_wake_host_h>;
>>>> + };
>>>> +};
>>>> +
>>>> +&sdhci {
>>>> + bus-width = <8>;
>>>> + cap-mmc-highspeed;
>>>> + full-pwr-cycle-in-suspend;
>>>> + mmc-hs400-1_8v;
>>>> + mmc-hs400-enhanced-strobe;
>>>> + no-sdio;
>>>> + no-sd;
>>>> + non-removable;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&saradc {
>>>> + vref-supply = <&vcca_1v8_s0>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&u2phy0 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&u2phy0_otg {
>>>> + phy-supply = <&vcc5v0_usb_otg0>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&uart0 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&uart5 {
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&uart5m0_xfer &uart5m0_ctsn &uart5m0_rtsn>;
>>>> + uart-has-rtscts;
>>>> + status = "okay";
>>>> +
>>>> + bluetooth {
>>>> + compatible = "realtek,rtl8822cs-bt";
>>>> + enable-gpios = <&gpio3 RK_PC7 GPIO_ACTIVE_HIGH>;
>>>> + device-wake-gpios = <&gpio3 RK_PD0 GPIO_ACTIVE_HIGH>;
>>>> + host-wake-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
>>>> + pinctrl-names = "default";
>>>> + pinctrl-0 = <&bt_wake_host_h &host_wake_bt_h &bt_reg_on_h>;
>>>> + };
>>>> +};
>>>> +
>>>> +&usbdp_phy {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&usb_drd0_dwc3 {
>>>> + dr_mode = "host";
>>>> + extcon = <&u2phy0>;
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&vop {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&vop_mmu {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&vp0 {
>>>> + vp0_out_hdmi: endpoint@...KCHIP_VOP2_EP_HDMI0 {
>>>> + reg = <ROCKCHIP_VOP2_EP_HDMI0>;
>>>> + remote-endpoint = <&hdmi_in_vp0>;
>>>> + };
>>>> +};
>>>
>
Powered by blists - more mailing lists