| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAKPKb882DgYB2fZXRDU_y1Xqz6GtFEErvzzET9eOAm=db0ns1g@mail.gmail.com>
Date: Sat, 27 Sep 2025 10:21:45 +0530
From: opensource india <opensource206@...il.com>
To: mchehab@...nel.org, hverkuil@...nel.org, ribalda@...omium.org,
laurent.pinchart@...asonboard.com, yunkec@...gle.com,
sakari.ailus@...ux.intel.com, james.cowgill@...ize.com, hansg@...nel.org
Cc: linux-kernel@...r.kernel.org, linux-media@...r.kernel.org
Subject: Re: [PATCH v3] media: v4l2-ctrls: add full AV1 profile validation in validate_av1_sequence()
On Sat, Sep 13, 2025 at 4:23 PM Pavan Bobba <opensource206@...il.com> wrote:
>
> Complete the "TODO: PROFILES" by enforcing profile-specific and
> monochrome constraints as defined by the AV1 specification
> (Section 5.5.2, "Color config syntax").
>
> The validator now checks:
>
> - Flags: reject any unknown bits set in sequence->flags
> - Profile range: only profiles 0..2 are valid
> - Profile 0: 8/10-bit only, subsampling must be 4:2:0 (sx=1, sy=1),
> monochrome allowed
> - Profile 1: 8/10-bit only, subsampling must be 4:4:4 (sx=0, sy=0),
> monochrome forbidden
> - Profile 2:
> * 8/10-bit: only 4:2:2 allowed (sx=1, sy=0)
> * 12-bit: 4:4:4 (sx=0, sy=0), 4:2:2 (sx=1, sy=0), or 4:2:0 (sx=1, sy=1)
> allowed
> - Monochrome path (all profiles except 1): forces subsampling_x=1,
> subsampling_y=1, separate_uv_delta_q=0
>
> These checks prevent userspace from providing invalid AV1 sequence
> headers that would otherwise be accepted, leading to undefined driver
> or hardware behavior.
>
> Signed-off-by: Pavan Bobba <opensource206@...il.com>
> ---
> v1 -> v2 : Added more checks for subsampling combinations per profile.
> : Added a TODO note in the function header for checks to be implemented later.
>
> v2 -> v3 : Patch generated properly with all the changes
>
> drivers/media/v4l2-core/v4l2-ctrls-core.c | 125 +++++++++++++++++-----
> 1 file changed, 100 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
> index 98b960775e87..fa03341588e4 100644
> --- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
> +++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
> @@ -827,39 +827,114 @@ static int validate_av1_frame(struct v4l2_ctrl_av1_frame *f)
> return 0;
> }
>
> +/**
> + * validate_av1_sequence - validate AV1 sequence header fields
> + * @s: control struct from userspace
> + *
> + * Implements AV1 spec §5.5.2 color_config() checks that are
> + * possible with the current v4l2_ctrl_av1_sequence definition.
> + *
> + * TODO: extend validation once additional fields such as
> + * color_primaries, transfer_characteristics,
> + * matrix_coefficients, and chroma_sample_position
> + * are added to the uAPI.
> + *
> + * Returns 0 if valid, -EINVAL otherwise.
> + */
> static int validate_av1_sequence(struct v4l2_ctrl_av1_sequence *s)
> {
> - if (s->flags &
> - ~(V4L2_AV1_SEQUENCE_FLAG_STILL_PICTURE |
> - V4L2_AV1_SEQUENCE_FLAG_USE_128X128_SUPERBLOCK |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_FILTER_INTRA |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTRA_EDGE_FILTER |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTERINTRA_COMPOUND |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_WARPED_MOTION |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_DUAL_FILTER |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_ORDER_HINT |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_JNT_COMP |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_REF_FRAME_MVS |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_SUPERRES |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF |
> - V4L2_AV1_SEQUENCE_FLAG_ENABLE_RESTORATION |
> - V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME |
> - V4L2_AV1_SEQUENCE_FLAG_COLOR_RANGE |
> - V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X |
> - V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y |
> - V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT |
> - V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q))
> - return -EINVAL;
> + const bool mono = s->flags & V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME;
> + const bool sx = s->flags & V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X;
> + const bool sy = s->flags & V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y;
> + const bool uv_dq = s->flags & V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q;
>
> - if (s->seq_profile == 1 && s->flags & V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME)
> + /* 1. Reject unknown flags */
> + if (s->flags &
> + ~(V4L2_AV1_SEQUENCE_FLAG_STILL_PICTURE |
> + V4L2_AV1_SEQUENCE_FLAG_USE_128X128_SUPERBLOCK |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_FILTER_INTRA |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTRA_EDGE_FILTER |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_INTERINTRA_COMPOUND |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_MASKED_COMPOUND |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_WARPED_MOTION |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_DUAL_FILTER |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_ORDER_HINT |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_JNT_COMP |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_REF_FRAME_MVS |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_SUPERRES |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_CDEF |
> + V4L2_AV1_SEQUENCE_FLAG_ENABLE_RESTORATION |
> + V4L2_AV1_SEQUENCE_FLAG_MONO_CHROME |
> + V4L2_AV1_SEQUENCE_FLAG_COLOR_RANGE |
> + V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_X |
> + V4L2_AV1_SEQUENCE_FLAG_SUBSAMPLING_Y |
> + V4L2_AV1_SEQUENCE_FLAG_FILM_GRAIN_PARAMS_PRESENT |
> + V4L2_AV1_SEQUENCE_FLAG_SEPARATE_UV_DELTA_Q))
> return -EINVAL;
>
> - /* reserved */
> + /* 2. Profile range */
> if (s->seq_profile > 2)
> return -EINVAL;
>
> - /* TODO: PROFILES */
> + /* 3. Monochrome shortcut */
> + if (mono) {
> + /* Profile 1 forbids monochrome */
> + if (s->seq_profile == 1)
> + return -EINVAL;
> +
> + /* Mono → subsampling must look like 4:0:0: sx=1, sy=1 */
> + if (!sx || !sy)
> + return -EINVAL;
> +
> + /* separate_uv_delta_q must be 0 */
> + if (uv_dq)
> + return -EINVAL;
> +
> + return 0;
> + }
> +
> + /* 4. Profile-specific rules */
> + switch (s->seq_profile) {
> + case 0:
> + /* Profile 0: only 8/10-bit, subsampling=4:2:0 (sx=1, sy=1) */
> + if (s->bit_depth != 8 && s->bit_depth != 10)
> + return -EINVAL;
> + if (!(sx && sy))
> + return -EINVAL;
> + break;
> +
> + case 1:
> + /* Profile 1: only 8/10-bit, subsampling=4:4:4 (sx=0, sy=0) */
> + if (s->bit_depth != 8 && s->bit_depth != 10)
> + return -EINVAL;
> + if (sx || sy)
> + return -EINVAL;
> + break;
> +
> + case 2:
> + /* Profile 2: 8/10/12-bit allowed */
> + if (s->bit_depth != 8 && s->bit_depth != 10 &&
> + s->bit_depth != 12)
> + return -EINVAL;
> +
> + if (s->bit_depth == 12) {
> + if (!sx) {
> + /* 4:4:4 → sy must be 0 */
> + if (sy)
> + return -EINVAL;
> + } else {
> + /* sx=1 → sy=0 (4:2:2) or sy=1 (4:2:0) */
> + if (sy != 0 && sy != 1)
> + return -EINVAL;
> + }
> + } else {
> + /* 8/10-bit → only 4:2:2 allowed (sx=1, sy=0) */
> + if (!(sx && !sy))
> + return -EINVAL;
> + }
> + break;
> + }
> +
> return 0;
> }
>
> --
> 2.43.0
>
Hi all,
It has been a couple of weeks since I sent this patch. Could anyone
please review it?
Powered by blists - more mailing lists