[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E1v2nFX-00000007jXn-2pUD@rmk-PC.armlinux.org.uk>
Date: Sun, 28 Sep 2025 09:59:19 +0100
From: "Russell King (Oracle)" <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Gatien Chevallier <gatien.chevallier@...s.st.com>
Cc: Alexandre Torgue <alexandre.torgue@...s.st.com>,
Andrew Lunn <andrew@...n.ch>,
Andrew Lunn <andrew+netdev@...n.ch>,
Christophe Roullier <christophe.roullier@...s.st.com>,
Conor Dooley <conor+dt@...nel.org>,
"David S. Miller" <davem@...emloft.net>,
devicetree@...r.kernel.org,
Eric Dumazet <edumazet@...gle.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Jakub Kicinski <kuba@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org,
Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Simon Horman <horms@...nel.org>,
Tristram Ha <Tristram.Ha@...rochip.com>
Subject: [PATCH RFC net-next 6/6] net: stmmac: convert to phylink managed WoL
PHY speed
Convert stmmac to use phylink's management of the PHY speed when
Wake-on-Lan is enabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@...linux.org.uk>
---
drivers/net/ethernet/stmicro/stmmac/stmmac.h | 5 -----
.../net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 7 +------
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +--------------
3 files changed, 2 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index db4f82672d9a..d10da13ad645 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -376,11 +376,6 @@ enum stmmac_state {
extern const struct dev_pm_ops stmmac_simple_pm_ops;
-static inline bool stmmac_wol_enabled_phy(struct stmmac_priv *priv)
-{
- return !priv->plat->pmt && device_may_wakeup(priv->device);
-}
-
int stmmac_mdio_unregister(struct net_device *ndev);
int stmmac_mdio_register(struct net_device *ndev);
int stmmac_mdio_reset(struct mii_bus *mii);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index fd29b551a082..7ab736de308f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -793,13 +793,8 @@ static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct stmmac_priv *priv = netdev_priv(dev);
- int ret;
- ret = phylink_ethtool_set_wol(priv->phylink, wol);
- if (!ret)
- device_set_wakeup_enable(priv->device, !!wol->wolopts);
-
- return ret;
+ return phylink_ethtool_set_wol(priv->phylink, wol);
}
static int stmmac_ethtool_op_get_eee(struct net_device *dev,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index abe88b74239a..7b4f0c54b9ec 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1189,14 +1189,6 @@ static int stmmac_init_phy(struct net_device *dev)
phylink_ethtool_set_eee(priv->phylink, &eee);
}
- if (!priv->plat->pmt) {
- struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
-
- phylink_ethtool_get_wol(priv->phylink, &wol);
- device_set_wakeup_capable(priv->device, !!wol.supported);
- device_set_wakeup_enable(priv->device, !!wol.wolopts);
- }
-
return 0;
}
@@ -1265,6 +1257,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
config->eee_enabled_default = true;
}
+ config->wol_phy_speed_ctrl = true;
if (priv->plat->flags & STMMAC_FLAG_USE_PHY_WOL) {
config->wol_phy_legacy = true;
} else {
@@ -7795,9 +7788,6 @@ int stmmac_suspend(struct device *dev)
mutex_unlock(&priv->lock);
rtnl_lock();
- if (stmmac_wol_enabled_phy(priv))
- phylink_speed_down(priv->phylink, false);
-
phylink_suspend(priv->phylink, !!priv->wolopts);
rtnl_unlock();
@@ -7936,9 +7926,6 @@ int stmmac_resume(struct device *dev)
* workqueue thread, which will race with initialisation.
*/
phylink_resume(priv->phylink);
- if (stmmac_wol_enabled_phy(priv))
- phylink_speed_up(priv->phylink);
-
rtnl_unlock();
netif_device_attach(ndev);
--
2.47.3
Powered by blists - more mailing lists