linux-kernel - [PATCH net v3 1/2] phy: mscc: Use PHY_ID_MATCH_MODEL for VSC8584, VSC8582, VSC8575, VSC856X

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250929091302.106116-2-horatiu.vultur@microchip.com>
Date: Mon, 29 Sep 2025 11:13:01 +0200
From: Horatiu Vultur <horatiu.vultur@...rochip.com>
To: <andrew@...n.ch>, <hkallweit1@...il.com>, <linux@...linux.org.uk>,
	<davem@...emloft.net>, <edumazet@...gle.com>, <kuba@...nel.org>,
	<pabeni@...hat.com>, <richardcochran@...il.com>, <vladimir.oltean@....com>,
	<vadim.fedorenko@...ux.dev>, <rmk+kernel@...linux.org.uk>,
	<rosenp@...il.com>, <christophe.jaillet@...adoo.fr>,
	<steen.hegelund@...rochip.com>
CC: <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>, Horatiu Vultur
	<horatiu.vultur@...rochip.com>
Subject: [PATCH net v3 1/2] phy: mscc: Use PHY_ID_MATCH_MODEL for VSC8584, VSC8582, VSC8575, VSC856X

As the PHYs VSC8584, VSC8582, VSC8575 and VSC856X exists only as rev B,
we can use PHY_ID_MATCH_MODEL to match exactly on revision B of the PHY.
Because of this change then there is not need the check if it is a
different revision than rev B in the function vsc8584_probe() as we
already know that this will never happen.
These changes are a preparation for the next patch because in that patch
we will make the PHYs VSC8574 and VSC8572 to use vsc8584_probe() and
these PHYs have multiple revision.

Signed-off-by: Horatiu Vultur <horatiu.vultur@...rochip.com>
---
 drivers/net/phy/mscc/mscc.h      |  8 ++++----
 drivers/net/phy/mscc/mscc_main.c | 23 ++++-------------------
 2 files changed, 8 insertions(+), 23 deletions(-)

diff --git a/drivers/net/phy/mscc/mscc.h b/drivers/net/phy/mscc/mscc.h
index 2d8eca54c40a2..2eef5956b9cc5 100644
--- a/drivers/net/phy/mscc/mscc.h
+++ b/drivers/net/phy/mscc/mscc.h
@@ -289,12 +289,12 @@ enum rgmii_clock_delay {
 #define PHY_ID_VSC8540			  0x00070760
 #define PHY_ID_VSC8541			  0x00070770
 #define PHY_ID_VSC8552			  0x000704e0
-#define PHY_ID_VSC856X			  0x000707e0
+#define PHY_ID_VSC856X			  0x000707e1
 #define PHY_ID_VSC8572			  0x000704d0
 #define PHY_ID_VSC8574			  0x000704a0
-#define PHY_ID_VSC8575			  0x000707d0
-#define PHY_ID_VSC8582			  0x000707b0
-#define PHY_ID_VSC8584			  0x000707c0
+#define PHY_ID_VSC8575			  0x000707d1
+#define PHY_ID_VSC8582			  0x000707b1
+#define PHY_ID_VSC8584			  0x000707c1
 #define PHY_VENDOR_MSCC			0x00070400
 
 #define MSCC_VDDMAC_1500		  1500
diff --git a/drivers/net/phy/mscc/mscc_main.c b/drivers/net/phy/mscc/mscc_main.c
index ef0ef1570d392..d05f6ed052ad0 100644
--- a/drivers/net/phy/mscc/mscc_main.c
+++ b/drivers/net/phy/mscc/mscc_main.c
@@ -1724,12 +1724,6 @@ static int vsc8584_config_init(struct phy_device *phydev)
 	 * in this pre-init function.
 	 */
 	if (phy_package_init_once(phydev)) {
-		/* The following switch statement assumes that the lowest
-		 * nibble of the phy_id_mask is always 0. This works because
-		 * the lowest nibble of the PHY_ID's below are also 0.
-		 */
-		WARN_ON(phydev->drv->phy_id_mask & 0xf);
-
 		switch (phydev->phy_id & phydev->drv->phy_id_mask) {
 		case PHY_ID_VSC8504:
 		case PHY_ID_VSC8552:
@@ -2290,11 +2284,6 @@ static int vsc8584_probe(struct phy_device *phydev)
 	   VSC8531_DUPLEX_COLLISION};
 	int ret;
 
-	if ((phydev->phy_id & MSCC_DEV_REV_MASK) != VSC8584_REVB) {
-		dev_err(&phydev->mdio.dev, "Only VSC8584 revB is supported.\n");
-		return -ENOTSUPP;
-	}
-
 	vsc8531 = devm_kzalloc(&phydev->mdio.dev, sizeof(*vsc8531), GFP_KERNEL);
 	if (!vsc8531)
 		return -ENOMEM;
@@ -2587,9 +2576,8 @@ static struct phy_driver vsc85xx_driver[] = {
 	.config_inband  = vsc85xx_config_inband,
 },
 {
-	.phy_id		= PHY_ID_VSC856X,
+	PHY_ID_MATCH_MODEL(PHY_ID_VSC856X),
 	.name		= "Microsemi GE VSC856X SyncE",
-	.phy_id_mask	= 0xfffffff0,
 	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
@@ -2667,9 +2655,8 @@ static struct phy_driver vsc85xx_driver[] = {
 	.config_inband  = vsc85xx_config_inband,
 },
 {
-	.phy_id		= PHY_ID_VSC8575,
+	PHY_ID_MATCH_MODEL(PHY_ID_VSC8575),
 	.name		= "Microsemi GE VSC8575 SyncE",
-	.phy_id_mask	= 0xfffffff0,
 	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
@@ -2693,9 +2680,8 @@ static struct phy_driver vsc85xx_driver[] = {
 	.config_inband  = vsc85xx_config_inband,
 },
 {
-	.phy_id		= PHY_ID_VSC8582,
+	PHY_ID_MATCH_MODEL(PHY_ID_VSC8582),
 	.name		= "Microsemi GE VSC8582 SyncE",
-	.phy_id_mask	= 0xfffffff0,
 	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
@@ -2719,9 +2705,8 @@ static struct phy_driver vsc85xx_driver[] = {
 	.config_inband  = vsc85xx_config_inband,
 },
 {
-	.phy_id		= PHY_ID_VSC8584,
+	PHY_ID_MATCH_MODEL(PHY_ID_VSC8584),
 	.name		= "Microsemi GE VSC8584 SyncE",
-	.phy_id_mask	= 0xfffffff0,
 	/* PHY_GBIT_FEATURES */
 	.soft_reset	= &genphy_soft_reset,
 	.config_init    = &vsc8584_config_init,
-- 
2.34.1