lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20251002184120.495193-1-akshayaj.lkd@gmail.com>
Date: Fri,  3 Oct 2025 00:11:01 +0530
From: Akshay Jindal <akshayaj.lkd@...il.com>
To: dan@...obertson.com,
	jic23@...nel.org,
	dlechner@...libre.com,
	nuno.sa@...log.com,
	andy@...nel.org
Cc: Akshay Jindal <akshayaj.lkd@...il.com>,
	shuah@...nel.org,
	linux-iio@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v3 0/5] iio: accel: bma400: Refactor GENINTR config and register macros

This series refactors the BMA400 driver with a focus on generic interrupt
configuration and related register usage. The main changes reduce
usage of hard-coded values by introducing macros and formula-based
register addressing, and add a centralized lookup indexed on iio event
direction.

Alongside these updates, the series also reorganizes and renames register
and field macros for consistency with the datasheet, and extends comments
for additional clarity.

All patches are pure refactoring. No functional changes are intended.

Akshay Jindal (5):
  iio: accel: bma400: Reorganize and rename register and field macros
  iio: accel: bma400: Use macros for generic event configuration values
  iio: accel: bma400: Use index-based register addressing and lookup
  iio: accel: bma400: Rename activity_event_en() to generic_event_en()
  iio: accel: bma400: Add detail to comments in GEN INTR configuration

Changes since v2:
- Split single patch into five smaller patches as suggested
- Addressed review comments related to trailing comma [Patch 2/5]
- Extended renaming of macros to TAP_CONFIG registers [Patch 1/5]
- Addressed review comment received regarding write then replace in
  activity_event_en() [Patch 3/5]

Testing Summary:
- Tested on raspberrypi 4b and 7-semi bma400 sensor breakout board.
- Since no functional impact is there, so before functionality is
  expected to be equal to after change functionality.
- Tested mapping of GEN1 and GEN2 both on INT1 pin as before.
- Tested both activity and inactivity detection by setting attributes
  events/in_accel_mag_falling_en as well as events/in_accel_mag_rising_en.
- Did read and writes on various attributes such that write_event_config(),
  write_event_value() and read_event_value() callbacks are triggered.

 drivers/iio/accel/bma400.h      | 151 ++++++++------
 drivers/iio/accel/bma400_core.c | 345 ++++++++++++++++++--------------
 2 files changed, 286 insertions(+), 210 deletions(-)

-- 
2.43.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ