lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <DD7UR4O7OYEW.1LFYVKUEE6RED@fairphone.com>
Date: Thu, 02 Oct 2025 14:58:08 +0200
From: "Luca Weiss" <luca.weiss@...rphone.com>
To: "Griffin Kroah-Hartman" <griffin.kroah@...rphone.com>, "Mauro Carvalho
 Chehab" <mchehab@...nel.org>, "Rob Herring" <robh@...nel.org>, "Krzysztof
 Kozlowski" <krzk+dt@...nel.org>, "Conor Dooley" <conor+dt@...nel.org>,
 <devicetree@...r.kernel.org>, "Daniel Scally" <djrscally@...il.com>,
 "Sakari Ailus" <sakari.ailus@...ux.intel.com>, "Bjorn Andersson"
 <andersson@...nel.org>, "Konrad Dybcio" <konradybcio@...nel.org>,
 André Apitzsch <git@...tzsch.eu>
Cc: <linux-media@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
 <linux-arm-msm@...r.kernel.org>
Subject: Re: [PATCH 2/4] media: i2c: dw9719: Add DW9800K support

On Thu Oct 2, 2025 at 12:15 PM CEST, Griffin Kroah-Hartman wrote:
> The DW9800K is a similar part to the DW9719. The method for operation is
> the same as the DW9719, but the register set is different. Add support
> for this part to the existing dw9719 driver.
>
> Tested on the Fairphone 5 smartphone.

Can confirm!

Tested-by: Luca Weiss <luca.weiss@...rphone.com>

Regards
Luca

> Signed-off-by: Griffin Kroah-Hartman <griffin.kroah@...rphone.com>
> ---
>  drivers/media/i2c/dw9719.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>
> diff --git a/drivers/media/i2c/dw9719.c b/drivers/media/i2c/dw9719.c
> index 3627e78b8b6668933c4ecd92231465ce4105ff0c..172479f2c9f63f6b2a1f6eccf8184142edb383b9 100644
> --- a/drivers/media/i2c/dw9719.c
> +++ b/drivers/media/i2c/dw9719.c
> @@ -68,6 +68,9 @@
>  #define DW9761_VCM_PRELOAD		CCI_REG8(8)
>  #define DW9761_DEFAULT_VCM_PRELOAD	0x73
>  
> +#define DW9800K_DEFAULT_SAC		1
> +#define DW9800K_MODE_SAC_SHIFT		6
> +#define DW9800K_DEFAULT_VCM_FREQ		0x10
>  
>  #define to_dw9719_device(x) container_of(x, struct dw9719_device, sd)
>  
> @@ -75,6 +78,7 @@ enum dw9719_model {
>  	DW9718S,
>  	DW9719,
>  	DW9761,
> +	DW9800K,
>  };
>  
>  struct dw9719_device {
> @@ -137,6 +141,12 @@ static int dw9719_power_up(struct dw9719_device *dw9719, bool detect)
>  			goto props;
>  		}
>  
> +		if (dw9719->model == DW9800K) {
> +			dw9719->sac_mode = DW9800K_DEFAULT_SAC;
> +			dw9719->vcm_freq = DW9800K_DEFAULT_VCM_FREQ;
> +			goto props;
> +		}
> +
>  		ret = cci_read(dw9719->regmap, DW9719_INFO, &val, NULL);
>  		if (ret < 0)
>  			return ret;
> @@ -177,6 +187,12 @@ static int dw9719_power_up(struct dw9719_device *dw9719, bool detect)
>  	}
>  
>  	switch (dw9719->model) {
> +	case DW9800K:
> +		cci_write(dw9719->regmap, DW9719_CONTROL, DW9719_ENABLE_RINGING, &ret);
> +		cci_write(dw9719->regmap, DW9719_MODE,
> +				  dw9719->sac_mode << DW9800K_MODE_SAC_SHIFT, &ret);
> +		cci_write(dw9719->regmap, DW9719_VCM_FREQ, dw9719->vcm_freq, &ret);
> +		break;
>  	case DW9718S:
>  		/* Datasheet says [OCP/UVLO] should be disabled below 2.5V */
>  		dw9719->sac_mode &= DW9718S_CONTROL_SAC_MASK;
> @@ -426,6 +442,7 @@ static const struct of_device_id dw9719_of_table[] = {
>  	{ .compatible = "dongwoon,dw9718s", .data = (const void *)DW9718S },
>  	{ .compatible = "dongwoon,dw9719", .data = (const void *)DW9719 },
>  	{ .compatible = "dongwoon,dw9761", .data = (const void *)DW9761 },
> +	{ .compatible = "dongwoon,dw9800k", .data = (const void *)DW9800K },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, dw9719_of_table);


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ