[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20251002172539.586538-2-krishna.kurapati@oss.qualcomm.com>
Date: Thu, 2 Oct 2025 22:55:38 +0530
From: Krishna Kurapati <krishna.kurapati@....qualcomm.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Biju Das <biju.das.jz@...renesas.com>
Cc: linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Krishna Kurapati <krishna.kurapati@....qualcomm.com>
Subject: [PATCH 1/2] dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
Update the bindings to support reading ID state and VBUS, as per the
HD3SS3220 data sheet. The ID pin is kept high if VBUS is not at VSafe0V and
asserted low once VBUS is at VSafe0V, enforcing the Type-C requirement that
VBUS must be at VSafe0V before re-enabling VBUS.
Add id-gpios property to describe the input gpio for USB ID pin and vbus-
supply property to describe the regulator for USB VBUS.
Signed-off-by: Krishna Kurapati <krishna.kurapati@....qualcomm.com>
---
.../devicetree/bindings/usb/ti,hd3ss3220.yaml | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
index bec1c8047bc0..c869eece39a7 100644
--- a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.yaml
@@ -25,6 +25,19 @@ properties:
interrupts:
maxItems: 1
+ id-gpios:
+ description:
+ An input gpio for USB ID pin. Upon detecting a UFP device, HD3SS3220
+ will keep ID pin high if VBUS is not at VSafe0V. Once VBUS is at VSafe0V,
+ the HD3SS3220 will assert ID pin low. This is done to enforce Type-C
+ requirement that VBUS must be at VSafe0V before re-enabling VBUS.
+
+ maxItems: 1
+
+ vbus-supply:
+ description: A phandle to the regulator for USB VBUS if needed when host
+ mode or dual role mode is supported.
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
description: OF graph bindings (specified in bindings/graph.txt) that model
--
2.34.1
Powered by blists - more mailing lists