[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20251002172946.589061-1-krishna.kurapati@oss.qualcomm.com>
Date: Thu, 2 Oct 2025 22:59:46 +0530
From: Krishna Kurapati <krishna.kurapati@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Krishna Kurapati <krishna.kurapati@....qualcomm.com>
Subject: [PATCH] arm64: dts: qcom: lemans-evk: Add OTG support for primary USB controller
Enable OTG support for primary USB controller on EVK Platform. Add
HD3SS3220 Type-C port controller present between Type-C port and SoC
that provides role switch notifications to controller.
Signed-off-by: Krishna Kurapati <krishna.kurapati@....qualcomm.com>
---
Link to driver and binding changes:
https://lore.kernel.org/all/20251002172539.586538-1-krishna.kurapati@oss.qualcomm.com/
arch/arm64/boot/dts/qcom/lemans-evk.dts | 122 +++++++++++++++++++++++-
1 file changed, 121 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index c7dc9b8f4457..0b6d8d2d19d6 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -37,6 +37,32 @@ chosen {
stdout-path = "serial0:115200n8";
};
+ connector0 {
+ compatible = "usb-c-connector";
+ label = "USB0-Type-C";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb0_con_hs_ep: endpoint {
+ remote-endpoint = <&usb3_hs_ep>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+
+ usb0_con_ss_ep: endpoint {
+ remote-endpoint = <&hd3ss3220_in_ep>;
+ };
+ };
+ };
+ };
+
edp0-connector {
compatible = "dp-connector";
label = "EDP0";
@@ -101,6 +127,15 @@ platform {
};
};
+ vbus_supply_regulator_0: vbus-supply-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbus_supply_0";
+ gpio = <&expander1 2 GPIO_ACTIVE_HIGH>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
vmmc_sdc: regulator-vmmc-sdc {
compatible = "regulator-fixed";
@@ -453,6 +488,55 @@ &gpi_dma2 {
status = "okay";
};
+&pmm8654au_2_gpios {
+ usb0_intr_state: usb0-intr-state {
+ pins = "gpio5";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ power-source = <0>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ hd3ss3220@67 {
+ compatible = "ti,hd3ss3220";
+ reg = <0x67>;
+
+ interrupts-extended = <&pmm8654au_2_gpios 5 IRQ_TYPE_EDGE_FALLING>;
+
+ id-gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&usb_id>, <&usb0_intr_state>;
+ pinctrl-names = "default";
+
+ vbus-supply = <&vbus_supply_regulator_0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ hd3ss3220_in_ep: endpoint {
+ remote-endpoint = <&usb0_con_ss_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hd3ss3220_out_ep: endpoint {
+ remote-endpoint = <&usb3_role_switch>;
+ };
+ };
+ };
+ };
+};
+
&i2c18 {
status = "okay";
@@ -718,11 +802,24 @@ wake-pins {
};
};
+ qup_i2c11_default: qup-i2c11-state {
+ pins = "gpio48", "gpio49";
+ function = "qup1_se4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
sd_cd: sd-cd-state {
pins = "gpio36";
function = "gpio";
bias-pull-up;
};
+
+ usb_id: usb-id-state {
+ pins = "gpio50";
+ function = "gpio";
+ bias-pull-up;
+ };
};
&uart10 {
@@ -751,9 +848,32 @@ &ufs_mem_phy {
};
&usb_0 {
- dr_mode = "peripheral";
+ dr_mode = "otg";
+ usb-role-switch;
status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb3_hs_ep: endpoint {
+ remote-endpoint = <&usb0_con_hs_ep>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb3_role_switch: endpoint {
+ remote-endpoint = <&hd3ss3220_out_ep>;
+ };
+ };
+
+ };
};
&usb_0_hsphy {
--
2.34.1
Powered by blists - more mailing lists