[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAO9ioeWHJSj74VBR=2kHJDe_p1oG9Ngs6q9+s=CySGD3KY6sPQ@mail.gmail.com>
Date: Mon, 6 Oct 2025 01:01:59 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Ayushi Makhija <quic_amakhija@...cinc.com>
Cc: linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, robdclark@...il.com, sean@...rly.run,
marijn.suijten@...ainline.org, andersson@...nel.org, robh@...nel.org,
robh+dt@...nel.org, krzk+dt@...nel.org, konradybcio@...nel.org,
conor+dt@...nel.org, andrzej.hajda@...el.com,
neil.armstrong@...aro.org, rfoss@...nel.org,
Laurent.pinchart@...asonboard.com, jonas@...boo.se,
jernej.skrabec@...il.com, quic_rajeevny@...cinc.com,
quic_vproddut@...cinc.com, quic_jesszhan@...cinc.com
Subject: Re: [PATCH 2/3] arm64: dts: qcom: qcs8300: add Display Serial
Interface device nodes
On Sun, 5 Oct 2025 at 19:49, Ayushi Makhija <quic_amakhija@...cinc.com> wrote:
>
> On 9/26/2025 3:32 AM, Dmitry Baryshkov wrote:
> > On Thu, Sep 25, 2025 at 11:06:01AM +0530, Ayushi Makhija wrote:
> >> Add device tree nodes for the DSI0 controller with their corresponding
> >> PHY found on Qualcomm QCS8300 SoC.
> >>
> >> Signed-off-by: Ayushi Makhija <quic_amakhija@...cinc.com>
> >> ---
> >> arch/arm64/boot/dts/qcom/qcs8300.dtsi | 95 ++++++++++++++++++++++++++-
> >> 1 file changed, 94 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> >> index e0e1f63fc45b..834ae0522f2f 100644
> >> --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> >> +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> >> @@ -3,6 +3,7 @@
> >> * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> >> */
> >>
> >> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
> >> #include <dt-bindings/clock/qcom,qcs8300-gcc.h>
> >> #include <dt-bindings/clock/qcom,rpmh.h>
> >> #include <dt-bindings/clock/qcom,sa8775p-camcc.h>
> >> @@ -4854,6 +4855,13 @@ dpu_intf0_out: endpoint {
> >> remote-endpoint = <&mdss_dp0_in>;
> >> };
> >> };
> >> +
> >> + port@1 {
> >> + reg = <1>;
> >> + dpu_intf1_out: endpoint {
> >> + remote-endpoint = <&mdss_dsi0_in>;
> >> + };
> >> + };
> >> };
> >>
> >> mdp_opp_table: opp-table {
> >> @@ -4881,6 +4889,89 @@ opp-650000000 {
> >> };
> >> };
> >>
> >> + mdss_dsi0: dsi@...4000 {
> >> + compatible = "qcom,sa8775p-dsi-ctrl","qcom,mdss-dsi-ctrl";
> >
> > qcom,qcs8300-dsi-ctrl. You might use three compatibles (qcs8300, sa8775p
> > and the generic one), but there should be qcs8300 one.
> >
>
> Hi Dmitry,
>
> If I am adding three compatible string for ctrl,
>
> compatible = "qcom,qcs8300-dsi-ctrl",
> "qcom,sa8775p-dsi-ctrl",
> "qcom,mdss-dsi-ctrl";
>
> while validating dt-binding and dtsi against dt-schema. I am getting below errors
>
>
> /local/mnt/workspace/amakhija/linux_next/linux/arch/arm64/boot/dts/qcom/qcs8300-ride.dtb: dsi@...4000: compatible: 'oneOf' conditional failed, one must be fixed:
> ['qcom,qcs8300-dsi-ctrl', 'qcom,sa8775p-dsi-ctrl', 'qcom,mdss-dsi-ctrl'] is too long
> 'qcom,qcs8300-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 'qcom,mdss-dsi-ctrl']
> 'qcom,mdss-dsi-ctrl' was expected
> from schema $id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
>
> According to the dsi-controller-main.yaml schema only two strings are allowed one is the SOC specific and other one is generic "qcom,mdss-dsi-ctrl".
>
> Shall I keep only two strings qcom,qcs8300-mdss.yaml and the generic one "qcom,mdss-dsi-ctrl" or if we want to support 3 strings in compatible sting we need to modify the dsi-controller-main.yaml ?
Of course.
> Similarly, I am getting error for dsi_phy compatible string only one SOC specific compatible string is allow.
So, what's the question? You are adding support for the platform. So
yes, you need to modify the schema.
--
With best wishes
Dmitry
Powered by blists - more mailing lists