[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20251006-topic-x1e80100-hdmi-v5-0-c006311d59d7@linaro.org>
Date: Mon, 06 Oct 2025 15:55:02 +0200
From: Neil Armstrong <neil.armstrong@...aro.org>
To: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: Xilin Wu <sophon@...xa.com>, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Neil Armstrong <neil.armstrong@...aro.org>,
Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Subject: [PATCH v5 0/3] arm64: qcom: x1e78100-lenovo-thinkpad-t14s: add
support for HDMI output
The Thinkpad T14s embeds a transparent 4lanes DP->HDMI transceiver
connected to the third QMP Combo PHY 4 lanes.
The QMP USB3/DP Combo PHY hosts an USB3 phy and a DP PHY on top
of a combo glue to route either lanes to the 4 shared physical lanes.
The routing of the lanes can be:
- 1/2 DP + 2 USB3
- 1/2/4 DP
- 2 USB3
We need be able to specify the lanes mapping to DisplayPort
and/or USB3 peripherals when not connected to a Type-C complex.
Add the documentation for data-lanes in the out endpoints amd
use those in the driver to setup the right PHY mode and
orientation.
Finally Add all the data routing in DT, disable mode switching and specify
the QMP Combo PHY should be in DP-Only mode to route the 4 lanes to
the underlying DP phy.
Depends on:
- [1] https://lore.kernel.org/all/20251006-topic-sm8x50-fix-qmp-usb43dp-usb-switch-v2-1-3249e511013b@linaro.org/
- [2] https://lore.kernel.org/all/20251006-topic-sm8x50-qmp-combo-allow-mode-switch-v1-1-3d79e7ea6824@linaro.org/
Signed-off-by: Neil Armstrong <neil.armstrong@...aro.org>
---
Changes in v5:
- Fixed bindings tab
- Add comment about exlusivity of the static lanes mapping
- Fixed the single lane phy entries
- Switched to of_property_present()
- Moved the ss2 nodes after ss1 in DT
- Link to v4: https://lore.kernel.org/r/20250930-topic-x1e80100-hdmi-v4-0-86a14e8a34ac@linaro.org
Changes in v4:
- Add definition for single lane DP
- Fix lanes mapping for DP in bindings and driver
- Add documentation on how to interpret the data-lanes numbers
- Rewrite driver support for be simpler and split into helpers
- Rebase DT on next and drop phy.h include, and use proper mapping
- Link to v3: https://lore.kernel.org/r/20250908-topic-x1e80100-hdmi-v3-0-c53b0f2bc2fb@linaro.org
Changes in v3:
- Move the static lanes mapping in data-lanes in the out endpoints
- new bindings
- new drivewr implementation
- new DT layout
- rebased on next, fixed simple bridge rebase
- added link frequencies for dp2
- Link to v2: https://lore.kernel.org/r/20250902-topic-x1e80100-hdmi-v2-0-f4ccf0ef79ab@linaro.org
Changes in v2:
- Model the HDMI transceiver as a simple bridge
- Switch to a static lanes mapping property
- Link to v1: https://lore.kernel.org/r/20250821-topic-x1e80100-hdmi-v1-0-f14ad9430e88@linaro.org
---
Neil Armstrong (3):
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document lanes mapping when not using in USB-C complex
phy: qcom: qmp-combo: get the USB3 & DisplayPort lanes mapping from DT
arm64: dts: qcom: x1e78100-lenovo-thinkpad-t14s: add HDMI nodes
.../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 69 +++++++++-
.../dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi | 81 ++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 145 +++++++++++++++++++--
3 files changed, 286 insertions(+), 9 deletions(-)
---
base-commit: 51c986f3be9de5451e172eb5f7efa53fbe9870fc
change-id: 20250821-topic-x1e80100-hdmi-3bd5b5bd2d96
Best regards,
--
Neil Armstrong <neil.armstrong@...aro.org>
Powered by blists - more mailing lists