| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <fe1f4a0947c864496f4eeec8eef806afcf6094a4.1759824376.git.mazziesaccount@gmail.com>
Date: Tue, 7 Oct 2025 11:33:30 +0300
From: Matti Vaittinen <mazziesaccount@...il.com>
To: Matti Vaittinen <mazziesaccount@...il.com>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
Cc: Lee Jones <lee@...nel.org>, Pavel Machek <pavel@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Sebastian Reichel <sre@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>,
Matti Vaittinen <mazziesaccount@...il.com>,
Andreas Kemnade <andreas@...nade.info>, linux-leds@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-gpio@...r.kernel.org
Subject: [RFC PATCH 04/13] dt-bindings: mfd: ROHM BD72720
The ROHM BD72720 is a power management IC integrating regulators, GPIOs,
charger, LEDs, RTC and a clock gate.
Add dt-binding doc for ROHM BD72720.
Signed-off-by: Matti Vaittinen <mazziesaccount@...il.com>
---
.../bindings/mfd/rohm,bd72720-pmic.yaml | 269 ++++++++++++++++++
1 file changed, 269 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
new file mode 100644
index 000000000000..7f8168410121
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rohm,bd72720-pmic.yaml
@@ -0,0 +1,269 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/rohm,bd72720-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD72720 Power Management Integrated Circuit
+
+maintainers:
+ - Matti Vaittinen <mazziesaccount@...il.com>
+
+description: |
+ BD72720 is a single-chip power management IC for battery-powered portable
+ devices. The BD72720 integrates 10 bucks and 11 LDOs, and a 3000 mA
+ switching charger. The IC also includes a Coulomb counter, a real-time
+ clock (RTC), GPIOs and a 32.768 kHz clock gate.
+
+# In addition to the properties found from the charger node, the ROHM BD72720
+# uses properties from a static battery node. Please see the:
+# Documentation/devicetree/bindings/power/supply/rohm,vdr-battery.yaml
+#
+# Following properties are used
+# when present:
+#
+# charge-full-design-microamp-hours: Battry capacity in mAh
+# voltage-max-design-microvolt: Maximum voltage
+# voltage-min-design-microvolt: Minimum voltage system is still operating.
+# degrade-cycle-microamp-hours: Capacity lost due to aging at each full
+# charge cycle.
+# ocv-capacity-celsius: Array of OCV table temperatures. 1/table.
+# ocv-capacity-table-<N>: Table of OCV voltage/SOC pairs. Corresponds
+# N.th temperature in ocv-capacity-celsius
+#
+# ROHM specific properties:
+# rohm,voltage-vdr-thresh-microvolt: Threshold for starting the VDR correction
+# rohm,volt-drop-soc: Table of capacity values matching the
+# values in VDR tables.
+# rohm,volt-drop-high-temp-microvolt: VDR table for high temperature
+# rohm,volt-drop-normal-temp-microvolt: VDR table for normal temperature
+# rohm,volt-drop-low-temp-microvolt: VDR table for low temperature
+# rohm,volt-drop-very-low-temp-microvolt: VDR table for very low temperature
+#
+# VDR tables are (usually) determined for a specific battery by ROHM.
+# The battery node would then be referred from the charger node:
+#
+# monitored-battery = <&battery>;
+
+properties:
+ compatible:
+ const: rohm,bd72720
+
+ reg:
+ description:
+ I2C slave address.
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ The first cell is the pin number and the second cell is used to specify
+ flags. See ../gpio/gpio.txt for more information.
+
+ clocks:
+ maxItems: 1
+
+ "#clock-cells":
+ const: 0
+
+ clock-output-names:
+ const: bd71828-32k-out
+
+ rohm,clkout-open-drain:
+ description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 1
+
+ rohm,charger-sense-resistor-milli-ohms:
+ minimum: 10
+ maximum: 50
+ description: |
+ BD72720 has a SAR ADC for measuring charging currents. External sense
+ resistor (RSENSE in data sheet) should be used. If some other but
+ 30 mOhm resistor is used the resistance value should be given here in
+ milli Ohms.
+
+ regulators:
+ $ref: ../regulator/rohm,bd77270-regulator.yaml
+ description:
+ List of child nodes that specify the regulators.
+
+ leds:
+ $ref: ../leds/rohm,bd71828-leds.yaml
+
+ rohm,pin-dvs0:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ BD72720 has 4 different OTP options to determine the use of dvs0-pin.
+ OTP0 - regulator RUN state control.
+ OTP1 - GPI.
+ OTP2 - GPO.
+ OTP3 - Power sequencer output.
+ This property specifies the use of the pin.
+ enum:
+ - dvs-input
+ - gpi
+ - gpo
+
+ rohm,pin-dvs1:
+ $ref: /schemas/types.yaml#/definitions/string
+ description:
+ see rohm,pin-dvs0
+ enum:
+ - dvs-input
+ - gpi
+ - gpo
+
+ rohm,pin-exten0:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: BD72720 has an OTP option to use exten0-pin for different
+ purposes. Set this property accrdingly.
+ const: gpo
+
+ rohm,pin-exten1:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: BD72720 has an OTP option to use exten1-pin for different
+ purposes. Set this property accrdingly.
+ const: gpo
+
+ rohm,pin-fault_b:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: BD72720 has an OTP option to use fault_b-pin for different
+ purposes. Set this property accrdingly.
+ const: gpo
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - "#clock-cells"
+ - regulators
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pmic: pmic@4b {
+ compatible = "rohm,bd71828";
+ reg = <0x4b>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+
+ clocks = <&osc 0>;
+ #clock-cells = <0>;
+ clock-output-names = "bd71828-32k-out";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-reserved-ranges = <0 1>, <2 1>;
+
+ rohm,charger-sense-resistor-ohms = <10000000>;
+
+ regulators {
+ buck1: BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <2500>;
+ };
+ buck2: BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <2500>;
+ };
+ buck3: BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <2000000>;
+ };
+ buck4: BUCK4 {
+ regulator-name = "buck4";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ buck5: BUCK5 {
+ regulator-name = "buck5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ buck6: BUCK6 {
+ regulator-name = "buck6";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <2500>;
+ };
+ buck7: BUCK7 {
+ regulator-name = "buck7";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-ramp-delay = <2500>;
+ };
+ ldo1: LDO1 {
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo2: LDO2 {
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo3: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo4: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo5: LDO5 {
+ regulator-name = "ldo5";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo6: LDO6 {
+ regulator-name = "ldo6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ ldo7_reg: LDO7 {
+ regulator-name = "ldo7";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ leds {
+ compatible = "rohm,bd71828-leds";
+
+ led-1 {
+ rohm,led-compatible = "bd71828-grnled";
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led-2 {
+ rohm,led-compatible = "bd71828-ambled";
+ function = LED_FUNCTION_CHARGING;
+ color = <LED_COLOR_ID_AMBER>;
+ };
+ };
+ };
+ };
--
2.51.0
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists