Message-ID: <d0fc7dd9-d921-4d82-9b70-bedca7056961@kzalloc.com>
Date: Thu, 9 Oct 2025 07:28:19 +0900
From: Yunseong Kim <ysk@...lloc.com>
To: Andrey Konovalov <andreyknvl@...il.com>
Cc: Catalin Marinas <catalin.marinas@....com>, Will Deacon <will@...nel.org>,
 James Morse <james.morse@....com>, Yeoreum Yun <yeoreum.yun@....com>,
 Vincenzo Frascino <vincenzo.frascino@....com>, Marc Zyngier
 <maz@...nel.org>, Mark Brown <broonie@...nel.org>,
 Oliver Upton <oliver.upton@...ux.dev>, Ard Biesheuvel <ardb@...nel.org>,
 Andrey Ryabinin <ryabinin.a.a@...il.com>,
 Alexander Potapenko <glider@...gle.com>, Dmitry Vyukov <dvyukov@...gle.com>,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
 kasan-dev@...glegroups.com
Subject: Re: [PATCH] arm64: cpufeature: Don't cpu_enable_mte() when
 KASAN_GENERIC is active

Hi Andrey,

On 10/9/25 6:36 AM, Andrey Konovalov wrote:
> On Wed, Oct 8, 2025 at 11:13 PM Yunseong Kim <ysk@...lloc.com> wrote:
>> [...]
> I do not understand this. Why is Generic KASAN incompatible with MTE?

My board wouldn't boot on the debian debug kernel, so I enabled
earlycon=pl011,0x40d0000 and checked via the UART console.

> Running Generic KASAN in the kernel while having MTE enabled (and e.g.
> used in userspace) seems like a valid combination.

Then it must be caused by something else. Thank you for letting me know.

It seems to be occurring in the call path as follows:

cpu_enable_mte()
 -> try_page_mte_tagging(ZERO_PAGE(0))
   -> VM_WARN_ON_ONCE(folio_test_hugetlb(page_folio(page)));

 https://elixir.bootlin.com/linux/v6.17/source/arch/arm64/include/asm/mte.h#L83

> The crash log above looks like a NULL-ptr-deref. On which line of code
> does it happen?

Decoded stack trace here:

[    0.000000] Unable to handle kernel paging request at virtual address dfff800000000005
[    0.000000] KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
[    0.000000] Mem abort info:
[    0.000000]   ESR = 0x0000000096000005
[    0.000000]   EC = 0x25: DABT (current EL), IL = 32 bits
[    0.000000]   SET = 0, FnV = 0
[    0.000000]   EA = 0, S1PTW = 0
[    0.000000]   FSC = 0x05: level 1 translation fault
[    0.000000] Data abort info:
[    0.000000]   ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[    0.000000]   CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[    0.000000]   GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[    0.000000] [dfff800000000005] address between user and kernel address ranges
[    0.000000] Internal error: Oops: 0000000096000005 [#1]  SMP
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17+unreleased-debug-arm64 #1 PREEMPTLAZY  Debian 6.17-1~exp1
[    0.000000] pstate: 800000c9 (Nzcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    0.000000] pc : cpu_enable_mte (debian/build/build_arm64_none_debug-arm64/include/linux/page-flags.h:1065 (discriminator 1) debian/build/build_arm64_none_debug-arm64/arch/arm64/include/asm/mte.h:83 (discriminator 1) debian/build/build_arm64_none_debug-arm64/arch/arm64/kernel/cpufeature.c:2419 (discriminator 1))
[    0.000000] lr : cpu_enable_mte (debian/build/build_arm64_none_debug-arm64/include/linux/page-flags.h:1065 (discriminator 1) debian/build/build_arm64_none_debug-arm64/arch/arm64/include/asm/mte.h:83 (discriminator 1) debian/build/build_arm64_none_debug-arm64/arch/arm64/kernel/cpufeature.c:2419 (discriminator 1))
[    0.000000] sp : ffff800084f67d80
[    0.000000] x29: ffff800084f67d80 x28: 0000000000000043 x27: 0000000000000001
[    0.000000] x26: 0000000000000001 x25: ffff800084204008 x24: ffff800084203da8
[    0.000000] x23: ffff800084204000 x22: ffff800084203000 x21: ffff8000865a8000
[    0.000000] x20: fffffffffffffffe x19: fffffdffddaa6a00 x18: 0000000000000011
[    0.000000] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[    0.000000] x14: 0000000000000000 x13: 0000000000000001 x12: ffff700010a04829
[    0.000000] x11: 1ffff00010a04828 x10: ffff700010a04828 x9 : dfff800000000000
[    0.000000] x8 : ffff800085024143 x7 : 0000000000000001 x6 : ffff700010a04828
[    0.000000] x5 : ffff800084f9d200 x4 : 0000000000000000 x3 : ffff8000800794ac
[    0.000000] x2 : 0000000000000005 x1 : dfff800000000000 x0 : 000000000000002e
[    0.000000] Call trace:
[    0.000000]  cpu_enable_mte (debian/build/build_arm64_none_debug-arm64/√ (discriminator 1) debian/build/build_arm64_none_debug-arm64/arch/arm64/include/asm/mte.h:83 (discriminator 1) debian/build/build_arm64_none_debug-arm64/arch/arm64/kernel/cpufeature.c:2419 (discriminator 1)) (P)
[    0.000000]  enable_cpu_capabilities (debian/build/build_arm64_none_debug-arm64/arch/arm64/kernel/cpufeature.c:3561 (discriminator 2))
[    0.000000]  setup_boot_cpu_features (debian/build/build_arm64_none_debug-arm64/arch/arm64/kernel/cpufeature.c:3888 debian/build/build_arm64_none_debug-arm64/arch/arm64/kernel/cpufeature.c:3906)
[    0.000000]  smp_prepare_boot_cpu (debian/build/build_arm64_none_debug-arm64/arch/arm64/kernel/smp.c:466)
[    0.000000]  start_kernel (debian/build/build_arm64_none_debug-arm64/init/main.c:929)
[    0.000000]  __primary_switched (debian/build/build_arm64_none_debug-arm64/arch/arm64/kernel/head.S:247)
[    0.000000] Code: 9100c280 d2d00001 f2fbffe1 d343fc02 (38e16841)
All code
========
   0:	9100c280 	add	x0, x20, #0x30
   4:	d2d00001 	mov	x1, #0x800000000000        	// #140737488355328
   8:	f2fbffe1 	movk	x1, #0xdfff, lsl #48
   c:	d343fc02 	lsr	x2, x0, #3
  10:*	38e16841 	ldrsb	w1, [x2, x1]		<-- trapping instruction

Code starting with the faulting instruction
===========================================
   0:	38e16841 	ldrsb	w1, [x2, x1]
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] Kernel panic - not syncing: Attempted to kill the idle task!
[    0.000000] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---


If there are any other points you'd like me to check or directions, please
let me know.

Thank you!

Yunseong

Powered by blists - more mailing lists