linux-kernel - [PATCH v2 6/9] arm64: dts: qcom: ipq5424-rdp466: Enable QPIC SPI NAND support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20251008090413.458791-7-quic_mdalam@quicinc.com>
Date: Wed, 8 Oct 2025 14:34:10 +0530
From: Md Sadre Alam <quic_mdalam@...cinc.com>
To: <broonie@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
        <conor+dt@...nel.org>, <andersson@...nel.org>,
        <konradybcio@...nel.org>, <vkoul@...nel.org>,
        <linux-arm-msm@...r.kernel.org>, <linux-spi@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <dmaengine@...r.kernel.org>
CC: <quic_varada@...cinc.com>, <quic_mdalam@...cinc.com>
Subject: [PATCH v2 6/9] arm64: dts: qcom: ipq5424-rdp466: Enable QPIC SPI NAND support

Enable QPIC SPI NAND flash controller support on the IPQ5424 RDP466
reference design platform.

The RDP466 board features a SPI NAND flash device connected to the QPIC
controller for primary storage. This patch enables the QPIC BAM DMA
controller and SPI NAND interface of QPIC, and configures the necessary
pin control settings for proper operation.

Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@...cinc.com>
---

Change in [v2]

* Added Reviewed-by tag

* Added \n before status in qpic_nand node

Change in [v1]

* Enable bam and spi nand for ipq5424

 arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts | 44 +++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index 738618551203..7c32fb8f9f73 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -224,6 +224,29 @@ data-pins {
 		};
 	};
 
+	qpic_snand_default_state: qpic-snand-default-state {
+		clock-pins {
+			pins = "gpio5";
+			function = "qspi_clk";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+
+		cs-pins {
+			pins = "gpio4";
+			function = "qspi_cs";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "gpio0", "gpio1", "gpio2", "gpio3";
+			function = "qspi_data";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
 	uart0_pins: uart0-default-state {
 		pins = "gpio10", "gpio11", "gpio12", "gpio13";
 		function = "uart0";
@@ -246,6 +269,27 @@ pcie3_default_state: pcie3-default-state {
 	};
 };
 
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	pinctrl-0 = <&qpic_snand_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		nand-ecc-engine = <&qpic_nand>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
 &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 	pinctrl-names = "default";
-- 
2.34.1