linux-kernel - Re: [PATCH RESEND 2/2] i2c: tegra: Add Tegra256 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20251008101740.63661-1-akhilrajeev@nvidia.com>
Date: Wed, 8 Oct 2025 15:47:39 +0530
From: Akhil R <akhilrajeev@...dia.com>
To: <jonathanh@...dia.com>
CC: <akhilrajeev@...dia.com>, <andi.shyti@...nel.org>, <conor+dt@...nel.org>,
	<devicetree@...r.kernel.org>, <digetx@...il.com>, <krzk+dt@...nel.org>,
	<ldewangan@...dia.com>, <linux-i2c@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
	<robh@...nel.org>, <thierry.reding@...il.com>, <treding@...dia.com>
Subject: Re: [PATCH RESEND 2/2] i2c: tegra: Add Tegra256 support

On Wed, 8 Oct 2025 10:52:14 +0100, Jon Hunter wrote:
> On 08/10/2025 10:33, Jon Hunter wrote:
>> Hi Akhil,
>>
>> On 08/10/2025 06:35, Akhil R wrote:
>>> Hi Jon,
>>>
>>> On Tue, 7 Oct 2025 15:50:56 +0100, Jon Hunter wrote:
>>>> On 18/08/2025 05:33, Akhil R wrote:
>>>>> Add compatible and the hardware struct for Tegra256. Tegra256
>>>>> controllers
>>>>> use a different parent clock. Hence the timing parameters are different
>>>>> from the previous generations to meet the expected frequencies.
>>>>>
>>>>> Signed-off-by: Akhil R <akhilrajeev@...dia.com>
>>>>> Acked-by: Thierry Reding <treding@...dia.com>
>>>>>
>>>>> ---
>>>>>    drivers/i2c/busses/i2c-tegra.c | 26 ++++++++++++++++++++++++++
>>>>>    1 file changed, 26 insertions(+)
>>>>>
>>>>> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/
>>>>> i2c-tegra.c
>>>>> index 4eb31b913c1a..e533460bccc3 100644
>>>>> --- a/drivers/i2c/busses/i2c-tegra.c
>>>>> +++ b/drivers/i2c/busses/i2c-tegra.c
>>>>> @@ -1649,7 +1649,33 @@ static const struct tegra_i2c_hw_feature
>>>>> tegra194_i2c_hw = {
>>>>>         .has_interface_timing_reg = true,
>>>>>    };
>>>>> +static const struct tegra_i2c_hw_feature tegra256_i2c_hw = {
>>>>> +     .has_continue_xfer_support = true,
>>>>> +     .has_per_pkt_xfer_complete_irq = true,
>>>>> +     .clk_divisor_hs_mode = 7,
>>>>> +     .clk_divisor_std_mode = 0x7a,
>>>>> +     .clk_divisor_fast_mode = 0x40,
>>>>> +     .clk_divisor_fast_plus_mode = 0x19,
>>>>
>>>>
>>>> Can you check this divisor value? I see we have been using a value of
>>>> 0x14 for this which does not align with what we have here. Can you
>>>> confirm if this should be 0x19 or 0x14?
>>>
>>> If you happen to notice, we are using a different tlow, thigh and hold
>>> time values as well internally. We are also using separate variables
>>> (tlow, thigh) for fast and fastplus modes, whereas this driver currently
>>> uses the same variable (and value) for both fast and fastplus mode. With
>>> that limitation, these are the closest timing values we can use now to
>>> get the required frequency.
>>
>> Yes I did see that we have been re-working these variables and separated
>> some of the variables. However, this parameter itself has not changed
>> and now we have a different value in upstream. So regardless of the
>> changes being planned, I don't see why we are not using the same value
>> for this variable everywhere.
> 
> Or are you saying that this divisor value is correct per the other
> settings we have here? And when we push the other changes to separate
> the settings for fast mode and fast plus mode, we will then update this
> accordingly? If so, then that is fine.

Correct. For this tlow/thigh etc values, we have to use 0x19 as the clock divisor
to get the required frequency.

Regards,
Akhil