| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251009212003.2714447-3-kamal.dasu@broadcom.com>
Date: Thu, 9 Oct 2025 17:20:02 -0400
From: Kamal Dasu <kamal.dasu@...adcom.com>
To: peng.fan@....nxp.com,
andersson@...nel.org,
baolin.wang@...ux.alibaba.com,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
florian.fainelli@...adcom.com
Cc: bcm-kernel-feedback-list@...adcom.com,
linux-remoteproc@...r.kernel.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Kamal Dasu <kamal.dasu@...adcom.com>
Subject: [PATCH v3 2/3] hwspinlock: brcmstb hardware semaphore support
Broadcom settop SoCs have common 16 hardware semaphore registers that
can be used as part of the kernel hardware spinlock framework. The
hardware semaphores are part of the 'sundry' ip block that also has
controls like pin/mux controls, SoC identification, drive strength,
reset controls, and other misc bits.
Adding support for brmstb_hwspinlock that only maps sundry block
registers SUN_TOP_CTRL_SEMAPHORE_[0:15] to implement the hardware
spinlock operations. Change allows other Broadcom settop drivers to
call hwspin_trylock() and hwspin_unlock() interfaces to make use of
hwspinlock framework. Other driver dt nodes just need to provide a
reference to the &hwspinlock and lock id to make use of a particular
hardware lock.
e.g. hwlocks = <&hwspinlock0 0>;
Signed-off-by: Kamal Dasu <kamal.dasu@...adcom.com>
---
drivers/hwspinlock/Kconfig | 11 ++-
drivers/hwspinlock/Makefile | 1 +
drivers/hwspinlock/brcmstb_hwspinlock.c | 96 +++++++++++++++++++++++++
3 files changed, 107 insertions(+), 1 deletion(-)
create mode 100644 drivers/hwspinlock/brcmstb_hwspinlock.c
diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index 3874d15b0e9b..39797cadfd0b 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -8,6 +8,16 @@ menuconfig HWSPINLOCK
if HWSPINLOCK
+config HWSPINLOCK_BRCMSTB
+ tristate "Broadcom Setttop Hardware Semaphore functionality"
+ depends on ARCH_BRCMSTB || COMPILE_TEST
+ help
+ Broadcom settop hwspinlock driver.
+ Say y here to support the Broadcom Hardware Semaphore functionality, which
+ provides a synchronisation mechanism on the SoC.
+
+ If unsure, say N.
+
config HWSPINLOCK_OMAP
tristate "OMAP Hardware Spinlock device"
depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX || SOC_AM33XX || SOC_AM43XX || ARCH_K3 || COMPILE_TEST
@@ -62,5 +72,4 @@ config HSEM_U8500
SoC.
If unsure, say N.
-
endif # HWSPINLOCK
diff --git a/drivers/hwspinlock/Makefile b/drivers/hwspinlock/Makefile
index a0f16c9aaa82..35f2d94d8ba2 100644
--- a/drivers/hwspinlock/Makefile
+++ b/drivers/hwspinlock/Makefile
@@ -4,6 +4,7 @@
#
obj-$(CONFIG_HWSPINLOCK) += hwspinlock_core.o
+obj-$(CONFIG_HWSPINLOCK_BRCMSTB) += brcmstb_hwspinlock.o
obj-$(CONFIG_HWSPINLOCK_OMAP) += omap_hwspinlock.o
obj-$(CONFIG_HWSPINLOCK_QCOM) += qcom_hwspinlock.o
obj-$(CONFIG_HWSPINLOCK_SPRD) += sprd_hwspinlock.o
diff --git a/drivers/hwspinlock/brcmstb_hwspinlock.c b/drivers/hwspinlock/brcmstb_hwspinlock.c
new file mode 100644
index 000000000000..0b164c57192e
--- /dev/null
+++ b/drivers/hwspinlock/brcmstb_hwspinlock.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * brcmstb HWSEM driver
+ *
+ * Copyright (C) 2025 Broadcom
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/hwspinlock.h>
+#include <linux/io.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include "hwspinlock_internal.h"
+
+#define BRCMSTB_NUM_SEMAPHORES 16
+#define RESET_SEMAPHORE 0
+
+#define HWSPINLOCK_VAL 'L'
+
+static int brcmstb_hwspinlock_trylock(struct hwspinlock *lock)
+{
+ void __iomem *lock_addr = (void __iomem *)lock->priv;
+
+ writel(HWSPINLOCK_VAL, lock_addr);
+
+ return (readl(lock_addr) == HWSPINLOCK_VAL);
+}
+
+static void brcmstb_hwspinlock_unlock(struct hwspinlock *lock)
+{
+ void __iomem *lock_addr = (void __iomem *)lock->priv;
+
+ /* release the lock by writing 0 to it */
+ writel(RESET_SEMAPHORE, lock_addr);
+}
+
+static void brcmstb_hwspinlock_relax(struct hwspinlock *lock)
+{
+ ndelay(50);
+}
+
+static const struct hwspinlock_ops brcmstb_hwspinlock_ops = {
+ .trylock = brcmstb_hwspinlock_trylock,
+ .unlock = brcmstb_hwspinlock_unlock,
+ .relax = brcmstb_hwspinlock_relax,
+};
+
+static int brcmstb_hwspinlock_probe(struct platform_device *pdev)
+{
+ struct hwspinlock_device *bank;
+ struct hwspinlock *hwlock;
+ void __iomem *io_base;
+ int i, num_locks = BRCMSTB_NUM_SEMAPHORES;
+
+ io_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(io_base)) {
+ dev_err(&pdev->dev, "semaphore iobase mapping error\n");
+ return PTR_ERR(io_base);
+ }
+
+ bank = devm_kzalloc(&pdev->dev, struct_size(bank, lock, num_locks),
+ GFP_KERNEL);
+ if (!bank)
+ return -ENOMEM;
+
+ for (i = 0, hwlock = &bank->lock[0]; i < num_locks; i++, hwlock++)
+ hwlock->priv = (void __iomem *)(io_base + sizeof(u32) * i);
+
+ return devm_hwspin_lock_register(&pdev->dev, bank,
+ &brcmstb_hwspinlock_ops,
+ 0, num_locks);
+}
+
+static const struct of_device_id brcmstb_hwspinlock_ids[] = {
+ { .compatible = "brcm,brcmstb-hwspinlock", },
+ { /* end */ },
+};
+MODULE_DEVICE_TABLE(of, brcmstb_hwspinlock_ids);
+
+static struct platform_driver brcmstb_hwspinlock_driver = {
+ .probe = brcmstb_hwspinlock_probe,
+ .driver = {
+ .name = "brcmstb_hwspinlock",
+ .of_match_table = brcmstb_hwspinlock_ids,
+ },
+};
+
+module_platform_driver(brcmstb_hwspinlock_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Hardware Spinlock driver for brcmstb");
+MODULE_AUTHOR("Kamal Dasu <kdasu.dasu@...adcom.com>");
--
2.34.1
Powered by blists - more mailing lists