| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20251013213049.686797-2-robh@kernel.org>
Date: Mon, 13 Oct 2025 16:30:49 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Richard Cochran <richardcochran@...il.com>,
Sundar S K <Shyam-sundar.S-k@....com>
Cc: netdev@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH net-next] dt-bindings: net: Convert amd,xgbe-seattle-v1a to DT schema
Convert amd,xgbe-seattle-v1a binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@...nel.org>
---
.../bindings/net/amd,xgbe-seattle-v1a.yaml | 147 ++++++++++++++++++
.../devicetree/bindings/net/amd-xgbe.txt | 76 ---------
2 files changed, 147 insertions(+), 76 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml
delete mode 100644 Documentation/devicetree/bindings/net/amd-xgbe.txt
diff --git a/Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml b/Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml
new file mode 100644
index 000000000000..006add8b6410
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/amd,xgbe-seattle-v1a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD XGBE Seattle v1a
+
+maintainers:
+ - Shyam Sundar S K <Shyam-sundar.S-k@....com>
+
+allOf:
+ - $ref: /schemas/net/ethernet-controller.yaml#
+
+properties:
+ compatible:
+ const: amd,xgbe-seattle-v1a
+
+ reg:
+ items:
+ - description: MAC registers
+ - description: PCS registers
+ - description: SerDes Rx/Tx registers
+ - description: SerDes integration registers (1/2)
+ - description: SerDes integration registers (2/2)
+
+ interrupts:
+ description: Device interrupts. The first entry is the general device
+ interrupt. If amd,per-channel-interrupt is specified, each DMA channel
+ interrupt must be specified. The last entry is the PCS auto-negotiation
+ interrupt.
+ minItems: 2
+ maxItems: 6
+
+ clocks:
+ items:
+ - description: DMA clock for the device
+ - description: PTP clock for the device
+
+ clock-names:
+ items:
+ - const: dma_clk
+ - const: ptp_clk
+
+ iommus:
+ maxItems: 1
+
+ phy-mode: true
+
+ dma-coherent: true
+
+ amd,per-channel-interrupt:
+ description: Indicates that Rx and Tx complete will generate a unique
+ interrupt for each DMA channel.
+ type: boolean
+
+ amd,speed-set:
+ description: >
+ Speed capabilities of the device.
+ 0 = 1GbE and 10GbE
+ 1 = 2.5GbE and 10GbE
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+
+ amd,serdes-blwc:
+ description: Baseline wandering correction enablement for each speed.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 3
+ maxItems: 3
+ items:
+ enum: [0, 1]
+
+ amd,serdes-cdr-rate:
+ description: CDR rate speed selection for each speed.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: CDR rate for 1GbE
+ - description: CDR rate for 2.5GbE
+ - description: CDR rate for 10GbE
+
+ amd,serdes-pq-skew:
+ description: PQ data sampling skew for each speed.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: PQ skew for 1GbE
+ - description: PQ skew for 2.5GbE
+ - description: PQ skew for 10GbE
+
+ amd,serdes-tx-amp:
+ description: TX amplitude boost for each speed.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: TX amplitude for 1GbE
+ - description: TX amplitude for 2.5GbE
+ - description: TX amplitude for 10GbE
+
+ amd,serdes-dfe-tap-config:
+ description: DFE taps available to run for each speed.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: DFE taps available for 1GbE
+ - description: DFE taps available for 2.5GbE
+ - description: DFE taps available for 10GbE
+
+ amd,serdes-dfe-tap-enable:
+ description: DFE taps to enable for each speed.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ - description: DFE taps to enable for 1GbE
+ - description: DFE taps to enable for 2.5GbE
+ - description: DFE taps to enable for 10GbE
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - phy-mode
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ ethernet@...00000 {
+ compatible = "amd,xgbe-seattle-v1a";
+ reg = <0xe0700000 0x80000>,
+ <0xe0780000 0x80000>,
+ <0xe1240800 0x00400>,
+ <0xe1250000 0x00060>,
+ <0xe1250080 0x00004>;
+ interrupts = <0 325 4>,
+ <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>,
+ <0 323 4>;
+ amd,per-channel-interrupt;
+ clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
+ clock-names = "dma_clk", "ptp_clk";
+ phy-mode = "xgmii";
+ mac-address = [ 02 a1 a2 a3 a4 a5 ];
+ amd,speed-set = <0>;
+ amd,serdes-blwc = <1>, <1>, <0>;
+ amd,serdes-cdr-rate = <2>, <2>, <7>;
+ amd,serdes-pq-skew = <10>, <10>, <30>;
+ amd,serdes-tx-amp = <15>, <15>, <10>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
+ };
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt
deleted file mode 100644
index 9c27dfcd1133..000000000000
--- a/Documentation/devicetree/bindings/net/amd-xgbe.txt
+++ /dev/null
@@ -1,76 +0,0 @@
-* AMD 10GbE driver (amd-xgbe)
-
-Required properties:
-- compatible: Should be "amd,xgbe-seattle-v1a"
-- reg: Address and length of the register sets for the device
- - MAC registers
- - PCS registers
- - SerDes Rx/Tx registers
- - SerDes integration registers (1/2)
- - SerDes integration registers (2/2)
-- interrupts: Should contain the amd-xgbe interrupt(s). The first interrupt
- listed is required and is the general device interrupt. If the optional
- amd,per-channel-interrupt property is specified, then one additional
- interrupt for each DMA channel supported by the device should be specified.
- The last interrupt listed should be the PCS auto-negotiation interrupt.
-- clocks:
- - DMA clock for the amd-xgbe device (used for calculating the
- correct Rx interrupt watchdog timer value on a DMA channel
- for coalescing)
- - PTP clock for the amd-xgbe device
-- clock-names: Should be the names of the clocks
- - "dma_clk" for the DMA clock
- - "ptp_clk" for the PTP clock
-- phy-mode: See ethernet.txt file in the same directory
-
-Optional properties:
-- dma-coherent: Present if dma operations are coherent
-- amd,per-channel-interrupt: Indicates that Rx and Tx complete will generate
- a unique interrupt for each DMA channel - this requires an additional
- interrupt be configured for each DMA channel
-- amd,speed-set: Speed capabilities of the device
- 0 - 1GbE and 10GbE (default)
- 1 - 2.5GbE and 10GbE
-
-The MAC address will be determined using the optional properties defined in
-ethernet.txt.
-
-The following optional properties are represented by an array with each
-value corresponding to a particular speed. The first array value represents
-the setting for the 1GbE speed, the second value for the 2.5GbE speed and
-the third value for the 10GbE speed. All three values are required if the
-property is used.
-- amd,serdes-blwc: Baseline wandering correction enablement
- 0 - Off
- 1 - On
-- amd,serdes-cdr-rate: CDR rate speed selection
-- amd,serdes-pq-skew: PQ (data sampling) skew
-- amd,serdes-tx-amp: TX amplitude boost
-- amd,serdes-dfe-tap-config: DFE taps available to run
-- amd,serdes-dfe-tap-enable: DFE taps to enable
-
-Example:
- xgbe@...00000 {
- compatible = "amd,xgbe-seattle-v1a";
- reg = <0 0xe0700000 0 0x80000>,
- <0 0xe0780000 0 0x80000>,
- <0 0xe1240800 0 0x00400>,
- <0 0xe1250000 0 0x00060>,
- <0 0xe1250080 0 0x00004>;
- interrupt-parent = <&gic>;
- interrupts = <0 325 4>,
- <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>,
- <0 323 4>;
- amd,per-channel-interrupt;
- clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
- clock-names = "dma_clk", "ptp_clk";
- phy-mode = "xgmii";
- mac-address = [ 02 a1 a2 a3 a4 a5 ];
- amd,speed-set = <0>;
- amd,serdes-blwc = <1>, <1>, <0>;
- amd,serdes-cdr-rate = <2>, <2>, <7>;
- amd,serdes-pq-skew = <10>, <10>, <30>;
- amd,serdes-tx-amp = <15>, <15>, <10>;
- amd,serdes-dfe-tap-config = <3>, <3>, <1>;
- amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
- };
--
2.51.0
Powered by blists - more mailing lists