linux-kernel - Re: [PATCH v4 1/2] dt-bindings: mmc: sdhci-of-dwcmshc: Add Eswin EIC7700

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20251013114000.GA2755794-robh@kernel.org>
Date: Mon, 13 Oct 2025 06:40:00 -0500
From: Rob Herring <robh@...nel.org>
To: hehuan1@...incomputing.com
Cc: ulf.hansson@...aro.org, krzk+dt@...nel.org, conor+dt@...nel.org,
	jszhang@...nel.org, adrian.hunter@...el.com, p.zabel@...gutronix.de,
	linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, ningyu@...incomputing.com,
	linmin@...incomputing.com, pinkesh.vaghela@...fochips.com,
	xuxiang@...incomputing.com, luyulin@...incomputing.com,
	dongxuyang@...incomputing.com, zhangsenchuan@...incomputing.com,
	weishangjuan@...incomputing.com, lizhi2@...incomputing.com,
	caohang@...incomputing.com,
	Conor Dooley <conor.dooley@...rochip.com>
Subject: Re: [PATCH v4 1/2] dt-bindings: mmc: sdhci-of-dwcmshc: Add Eswin
 EIC7700

On Sat, Oct 11, 2025 at 07:11:50PM +0800, hehuan1@...incomputing.com wrote:
> From: Huan He <hehuan1@...incomputing.com>
> 
> EIC7700 use Synopsys dwcmshc IP for SD/eMMC controllers.
> Add Eswin EIC7700 support in sdhci-of-dwcmshc.yaml.
> 
> Signed-off-by: Huan He <hehuan1@...incomputing.com>
> Reviewed-by: Conor Dooley <conor.dooley@...rochip.com>
> ---
>  .../bindings/mmc/snps,dwcmshc-sdhci.yaml      | 57 +++++++++++++++++--
>  1 file changed, 51 insertions(+), 6 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
> index f882219a0a26..edd6c8e90cad 100644
> --- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
> @@ -30,6 +30,7 @@ properties:
>            - sophgo,sg2002-dwcmshc
>            - sophgo,sg2042-dwcmshc
>            - thead,th1520-dwcmshc
> +          - eswin,eic7700-dwcmshc
>  
>    reg:
>      maxItems: 1
> @@ -52,17 +53,30 @@ properties:
>      maxItems: 5
>  
>    reset-names:
> -    items:
> -      - const: core
> -      - const: bus
> -      - const: axi
> -      - const: block
> -      - const: timer
> +    maxItems: 5
>  
>    rockchip,txclk-tapnum:
>      description: Specify the number of delay for tx sampling.
>      $ref: /schemas/types.yaml#/definitions/uint8
>  
> +  eswin,hsp-sp-csr:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:

This should be:

items:
  - items:
      - description: ...
      ...

> +      - description: Phandle to HSP(High-Speed Peripheral) device
> +      - description: Offset of the stability status register for
> +                     internal clock
> +      - description: Offset of the stability register for host regulator
> +                     voltage.
> +    description: |

Don't need '|' if no formatting to preserve.

> +      HSP CSR is to control and get status of different high-speed
> +      peripherals (such as Ethernet, USB, SATA, etc.) via register,
> +      which can close module's clock, reset module independently
> +      and tune board-level's parameters of PHY, etc.

Wrap lines at 80 chars.

> +
> +  eswin,drive-impedance-ohms:
> +    description: Specifies the drive impedance in Ohm.
> +    enum: [33, 40, 50, 66, 100]
> +
>  required:
>    - compatible
>    - reg
> @@ -110,6 +124,37 @@ allOf:
>              - const: block
>              - const: timer
>  
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: eswin,eic7700-dwcmshc
> +    then:
> +      properties:
> +        resets:
> +          minItems: 4
> +          maxItems: 4
> +        reset-names:
> +          items:
> +            - const: axi
> +            - const: phy
> +            - const: prstn
> +            - const: txrx
> +      required:
> +        - eswin,hsp-sp-csr
> +        - eswin,drive-impedance-ohms
> +    else:
> +      properties:
> +        resets:
> +          maxItems: 5
> +        reset-names:
> +          items:
> +            - const: core
> +            - const: bus
> +            - const: axi
> +            - const: block
> +            - const: timer
> +
>    - if:
>        properties:
>          compatible:
> -- 
> 2.25.1
>