| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251014-add-support-for-camss-on-kaanapali-v2-5-f5745ba2dff9@oss.qualcomm.com>
Date: Tue, 14 Oct 2025 19:56:05 -0700
From: Hangxiang Ma <hangxiang.ma@....qualcomm.com>
To: Loic Poulain <loic.poulain@....qualcomm.com>,
Robert Foss <rfoss@...nel.org>, Andi Shyti <andi.shyti@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Todor Tomov <todor.too@...il.com>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>
Cc: linux-i2c@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org, aiqun.yu@....qualcomm.com,
tingwei.zhang@....qualcomm.com, trilok.soni@....qualcomm.com,
yijie.yang@....qualcomm.com,
Jingyi Wang <jingyi.wang@....qualcomm.com>,
Atiya Kailany <atiya.kailany@....qualcomm.com>,
Hangxiang Ma <hangxiang.ma@....qualcomm.com>
Subject: [PATCH v2 5/6] media: qcom: camss: csid: Add support for CSID 1080
Add more detailed resource information for CSID devices along with the
driver for CSID 1080 that is responsible for CSID register
configuration, module reset and IRQ handling for BUF_DONE events. And
aggregate a common definition 'CSI2_RX_CFG0_PHY_SEL_BASE_IDX' into csid
header file.
In this CSID version, RUP and AUP update values are split into two
registers along with a SET register. Accordingly , enhance the CSID
interface to accommodate both the legacy combined reg_update and the
split RUP and AUP updates.
Co-developed-by: Atiya Kailany <atiya.kailany@....qualcomm.com>
Signed-off-by: Atiya Kailany <atiya.kailany@....qualcomm.com>
Signed-off-by: Hangxiang Ma <hangxiang.ma@....qualcomm.com>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
.../media/platform/qcom/camss/camss-csid-1080.c | 371 +++++++++++++++++++++
drivers/media/platform/qcom/camss/camss-csid-680.c | 1 -
.../media/platform/qcom/camss/camss-csid-gen3.c | 1 -
drivers/media/platform/qcom/camss/camss-csid.h | 12 +-
drivers/media/platform/qcom/camss/camss.c | 80 +++++
6 files changed, 463 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index 23960d02877d..3a7ed4f5a004 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -8,6 +8,7 @@ qcom-camss-objs += \
camss-csid-4-7.o \
camss-csid-340.o \
camss-csid-680.o \
+ camss-csid-1080.o \
camss-csid-gen2.o \
camss-csid-gen3.o \
camss-csiphy-2ph-1-0.o \
diff --git a/drivers/media/platform/qcom/camss/camss-csid-1080.c b/drivers/media/platform/qcom/camss/camss-csid-1080.c
new file mode 100644
index 000000000000..165fbf1998ed
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-csid-1080.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-csid-1080.c
+ *
+ * Qualcomm MSM Camera Subsystem - CSID (CSI Decoder) Module
+ *
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+
+#include "camss.h"
+#include "camss-csid.h"
+#include "camss-csid-gen3.h"
+
+/* Reset and Command Registers */
+#define CSID_RST_CFG 0x108
+#define RST_MODE BIT(0)
+#define RST_LOCATION BIT(4)
+
+/* Reset and Command Registers */
+#define CSID_RST_CMD 0x10C
+#define SELECT_HW_RST BIT(0)
+#define SELECT_IRQ_RST BIT(2)
+#define CSID_IRQ_CMD 0x110
+#define IRQ_CMD_CLEAR BIT(0)
+
+/* Register Update Commands, RUP/AUP */
+#define CSID_RUP_CMD 0x114
+#define RUP_RDIN BIT(8)
+#define CSID_AUP_CMD 0x118
+#define AUP_RDIN BIT(8)
+#define CSID_RUP_AUP_CMD 0x11C
+#define RUP_SET BIT(0)
+#define MUP BIT(4)
+
+/* Top level interrupt registers */
+#define CSID_TOP_IRQ_STATUS 0x180
+#define CSID_TOP_IRQ_MASK 0x184
+#define CSID_TOP_IRQ_CLEAR 0x188
+#define INFO_RST_DONE BIT(0)
+#define CSI2_RX_IRQ_STATUS BIT(2)
+#define BUF_DONE_IRQ_STATUS BIT(3)
+
+/* Buffer done interrupt registers */
+#define CSID_BUF_DONE_IRQ_STATUS 0x1A0
+#define BUF_DONE_IRQ_STATUS_RDI_OFFSET 16
+#define CSID_BUF_DONE_IRQ_MASK 0x1A4
+#define CSID_BUF_DONE_IRQ_CLEAR 0x1A8
+#define CSID_BUF_DONE_IRQ_SET 0x1AC
+
+/* CSI2 RX interrupt registers */
+#define CSID_CSI2_RX_IRQ_STATUS 0x1B0
+#define CSID_CSI2_RX_IRQ_MASK 0x1B4
+#define CSID_CSI2_RX_IRQ_CLEAR 0x1B8
+#define CSID_CSI2_RX_IRQ_SET 0x1BC
+
+/* CSI2 RX Configuration */
+#define CSID_CSI2_RX_CFG0 0x880
+#define CSI2_RX_CFG0_NUM_ACTIVE_LANES 0
+#define CSI2_RX_CFG0_DL0_INPUT_SEL 4
+#define CSI2_RX_CFG0_PHY_NUM_SEL 20
+#define CSID_CSI2_RX_CFG1 0x884
+#define CSI2_RX_CFG1_ECC_CORRECTION_EN BIT(0)
+#define CSI2_RX_CFG1_VC_MODE BIT(2)
+
+#define MSM_CSID_MAX_SRC_STREAMS_1080 (csid_is_lite(csid) ? 4 : 5)
+
+/* RDI Configuration */
+#define CSID_RDI_CFG0(rdi) \
+ ((csid_is_lite(csid) ? 0x3080 : 0x5480) + 0x200 * (rdi))
+#define RDI_CFG0_RETIME_BS BIT(5)
+#define RDI_CFG0_TIMESTAMP_EN BIT(6)
+#define RDI_CFG0_TIMESTAMP_STB_SEL BIT(8)
+#define RDI_CFG0_DECODE_FORMAT 12
+#define RDI_CFG0_DT 16
+#define RDI_CFG0_VC 22
+#define RDI_CFG0_EN BIT(31)
+
+/* RDI Control and Configuration */
+#define CSID_RDI_CTRL(rdi) \
+ ((csid_is_lite(csid) ? 0x3088 : 0x5488) + 0x200 * (rdi))
+#define RDI_CTRL_START_CMD BIT(0)
+
+#define CSID_RDI_CFG1(rdi) \
+ ((csid_is_lite(csid) ? 0x3094 : 0x5494) + 0x200 * (rdi))
+#define RDI_CFG1_DROP_H_EN BIT(5)
+#define RDI_CFG1_DROP_V_EN BIT(6)
+#define RDI_CFG1_CROP_H_EN BIT(7)
+#define RDI_CFG1_CROP_V_EN BIT(8)
+#define RDI_CFG1_PACKING_FORMAT_MIPI BIT(15)
+
+/* RDI Pixel Store Configuration */
+#define CSID_RDI_PIX_STORE_CFG0(rdi) (0x5498 + 0x200 * (rdi))
+#define RDI_PIX_STORE_CFG0_EN BIT(0)
+#define RDI_PIX_STORE_CFG0_MIN_HBI 1
+
+/* RDI IRQ Status in wrapper */
+#define CSID_CSI2_RDIN_IRQ_STATUS(rdi) (0x224 + (0x10 * (rdi)))
+#define CSID_CSI2_RDIN_IRQ_MASK(rdi) (0x228 + (0x10 * (rdi)))
+#define CSID_CSI2_RDIN_IRQ_CLEAR(rdi) (0x22C + (0x10 * (rdi)))
+#define INFO_RUP_DONE BIT(23)
+
+static void __csid_aup_rup_trigger(struct csid_device *csid)
+{
+ /* trigger SET in combined register */
+ writel(RUP_SET, csid->base + CSID_RUP_AUP_CMD);
+}
+
+static void __csid_aup_update(struct csid_device *csid, int port_id)
+{
+ csid->aup_update |= AUP_RDIN << port_id;
+ writel(csid->aup_update, csid->base + CSID_AUP_CMD);
+
+ __csid_aup_rup_trigger(csid);
+}
+
+static void __csid_reg_update(struct csid_device *csid, int port_id)
+{
+ csid->rup_update |= RUP_RDIN << port_id;
+ writel(csid->rup_update, csid->base + CSID_RUP_CMD);
+
+ __csid_aup_rup_trigger(csid);
+}
+
+static void __csid_configure_rx(struct csid_device *csid,
+ struct csid_phy_config *phy)
+{
+ int val;
+
+ val = (phy->lane_cnt - 1) << CSI2_RX_CFG0_NUM_ACTIVE_LANES;
+ val |= phy->lane_assign << CSI2_RX_CFG0_DL0_INPUT_SEL;
+ val |= (phy->csiphy_id + CSI2_RX_CFG0_PHY_SEL_BASE_IDX)
+ << CSI2_RX_CFG0_PHY_NUM_SEL;
+ writel(val, csid->base + CSID_CSI2_RX_CFG0);
+
+ val = CSI2_RX_CFG1_ECC_CORRECTION_EN;
+ writel(val, csid->base + CSID_CSI2_RX_CFG1);
+}
+
+static void __csid_configure_rx_vc(struct csid_device *csid, int vc)
+{
+ int val;
+
+ if (vc > 3) {
+ val = readl(csid->base + CSID_CSI2_RX_CFG1);
+ val |= CSI2_RX_CFG1_VC_MODE;
+ writel(val, csid->base + CSID_CSI2_RX_CFG1);
+ }
+}
+
+static void __csid_ctrl_rdi(struct csid_device *csid, int enable, u8 rdi)
+{
+ int val = 0;
+
+ if (enable)
+ val = RDI_CTRL_START_CMD;
+
+ writel(val, csid->base + CSID_RDI_CTRL(rdi));
+}
+
+static void __csid_configure_rdi_pix_store(struct csid_device *csid, u8 rdi)
+{
+ u32 val;
+
+ /* Configure pixel store to allow absorption of hblanking or idle time.
+ * This helps with horizontal crop and prevents line buffer conflicts.
+ * Reset state is 0x8 which has MIN_HBI=4, we keep the default MIN_HBI
+ * and just enable the pixel store functionality.
+ */
+ val = (4 << RDI_PIX_STORE_CFG0_MIN_HBI) | RDI_PIX_STORE_CFG0_EN;
+ writel(val, csid->base + CSID_RDI_PIX_STORE_CFG0(rdi));
+}
+
+static void __csid_configure_rdi_stream(struct csid_device *csid, u8 enable, u8 vc)
+{
+ u32 val;
+ u8 lane_cnt = csid->phy.lane_cnt;
+
+ /* Source pads matching RDI channels on hardware.
+ * E.g. Pad 1 -> RDI0, Pad 2 -> RDI1, etc.
+ */
+ struct v4l2_mbus_framefmt *input_format = &csid->fmt[MSM_CSID_PAD_FIRST_SRC + vc];
+ const struct csid_format_info *format = csid_get_fmt_entry(csid->res->formats->formats,
+ csid->res->formats->nformats,
+ input_format->code);
+
+ if (!lane_cnt)
+ lane_cnt = 4;
+
+ val = RDI_CFG0_TIMESTAMP_EN;
+ val |= RDI_CFG0_TIMESTAMP_STB_SEL;
+ val |= RDI_CFG0_RETIME_BS;
+
+ /* note: for non-RDI path, this should be format->decode_format */
+ val |= DECODE_FORMAT_PAYLOAD_ONLY << RDI_CFG0_DECODE_FORMAT;
+ val |= vc << RDI_CFG0_VC;
+ val |= format->data_type << RDI_CFG0_DT;
+ writel(val, csid->base + CSID_RDI_CFG0(vc));
+
+ val = RDI_CFG1_PACKING_FORMAT_MIPI;
+ writel(val, csid->base + CSID_RDI_CFG1(vc));
+
+ /* Configure pixel store using dedicated register in 1080 */
+ if (!csid_is_lite(csid))
+ __csid_configure_rdi_pix_store(csid, vc);
+
+ val = 0;
+ writel(val, csid->base + CSID_RDI_CTRL(vc));
+
+ val = readl(csid->base + CSID_RDI_CFG0(vc));
+
+ if (enable)
+ val |= RDI_CFG0_EN;
+
+ writel(val, csid->base + CSID_RDI_CFG0(vc));
+}
+
+static void csid_configure_stream_1080(struct csid_device *csid, u8 enable)
+{
+ u8 i;
+ u8 vc;
+
+ __csid_configure_rx(csid, &csid->phy);
+
+ for (vc = 0; vc < MSM_CSID_MAX_SRC_STREAMS_1080; vc++) {
+ if (csid->phy.en_vc & BIT(vc)) {
+ __csid_configure_rdi_stream(csid, enable, vc);
+ __csid_configure_rx_vc(csid, vc);
+
+ for (i = 0; i < CAMSS_INIT_BUF_COUNT; i++)
+ __csid_aup_update(csid, vc);
+
+ __csid_reg_update(csid, vc);
+
+ __csid_ctrl_rdi(csid, enable, vc);
+ }
+ }
+}
+
+static int csid_configure_testgen_pattern_1080(struct csid_device *csid,
+ s32 val)
+{
+ return 0;
+}
+
+static void csid_subdev_reg_update_1080(struct csid_device *csid, int port_id,
+ bool clear)
+{
+ /* No explicit clear required */
+ if (!clear)
+ __csid_aup_update(csid, port_id);
+}
+
+/**
+ * csid_isr - CSID module interrupt service routine
+ * @irq: Interrupt line
+ * @dev: CSID device
+ *
+ * Return IRQ_HANDLED on success
+ */
+static irqreturn_t csid_isr_1080(int irq, void *dev)
+{
+ struct csid_device *csid = dev;
+ u32 val, buf_done_val;
+ u8 reset_done;
+ int i;
+
+ val = readl(csid->base + CSID_TOP_IRQ_STATUS);
+ writel(val, csid->base + CSID_TOP_IRQ_CLEAR);
+
+ reset_done = val & INFO_RST_DONE;
+
+ buf_done_val = readl(csid->base + CSID_BUF_DONE_IRQ_STATUS);
+ writel(buf_done_val, csid->base + CSID_BUF_DONE_IRQ_CLEAR);
+
+ for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS_1080; i++)
+ if (csid->phy.en_vc & BIT(i)) {
+ val = readl(csid->base + CSID_CSI2_RDIN_IRQ_STATUS(i));
+ writel(val, csid->base + CSID_CSI2_RDIN_IRQ_CLEAR(i));
+
+ if (buf_done_val & BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i)) {
+ /*
+ * buf done and RUP IRQ have been moved to CSID from VFE.
+ * Once CSID received buf done, need notify VFE of this
+ * event and trigger VFE to handle buf done process.
+ */
+ camss_buf_done(csid->camss, csid->id, i);
+ }
+ }
+
+ val = IRQ_CMD_CLEAR;
+ writel(val, csid->base + CSID_IRQ_CMD);
+
+ if (reset_done)
+ complete(&csid->reset_complete);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * csid_reset - Trigger reset on CSID module and wait to complete
+ * @csid: CSID device
+ *
+ * Return 0 on success or a negative error code otherwise
+ */
+static int csid_reset_1080(struct csid_device *csid)
+{
+ unsigned long time;
+ u32 val;
+ int i;
+
+ reinit_completion(&csid->reset_complete);
+
+ val = INFO_RST_DONE | BUF_DONE_IRQ_STATUS;
+ writel(val, csid->base + CSID_TOP_IRQ_CLEAR);
+ writel(val, csid->base + CSID_TOP_IRQ_MASK);
+
+ val = 0;
+ for (i = 0; i < MSM_CSID_MAX_SRC_STREAMS_1080; i++) {
+ if (csid->phy.en_vc & BIT(i)) {
+ /* Only need to clear Buffer Done IRQ Status here,
+ * RUP Done IRQ Status will be cleared once isr
+ * strobe generated by CSID_RST_CMD
+ */
+ val |= BIT(BUF_DONE_IRQ_STATUS_RDI_OFFSET + i);
+ }
+ }
+ writel(val, csid->base + CSID_BUF_DONE_IRQ_CLEAR);
+ writel(val, csid->base + CSID_BUF_DONE_IRQ_MASK);
+
+ /* Clear all IRQ status with CLEAR bits set */
+ val = IRQ_CMD_CLEAR;
+ writel(val, csid->base + CSID_IRQ_CMD);
+
+ val = RST_LOCATION | RST_MODE;
+ writel(val, csid->base + CSID_RST_CFG);
+
+ val = SELECT_HW_RST | SELECT_IRQ_RST;
+ writel(val, csid->base + CSID_RST_CMD);
+
+ time = wait_for_completion_timeout(&csid->reset_complete,
+ msecs_to_jiffies(CSID_RESET_TIMEOUT_MS));
+
+ if (!time) {
+ dev_err(csid->camss->dev, "CSID reset timeout\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void csid_subdev_init_1080(struct csid_device *csid)
+{
+ csid->testgen.nmodes = CSID_PAYLOAD_MODE_DISABLED;
+}
+
+const struct csid_hw_ops csid_ops_1080 = {
+ .configure_stream = csid_configure_stream_1080,
+ .configure_testgen_pattern = csid_configure_testgen_pattern_1080,
+ .hw_version = csid_hw_version,
+ .isr = csid_isr_1080,
+ .reset = csid_reset_1080,
+ .src_pad_code = csid_src_pad_code,
+ .subdev_init = csid_subdev_init_1080,
+ .reg_update = csid_subdev_reg_update_1080,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-csid-680.c b/drivers/media/platform/qcom/camss/camss-csid-680.c
index 3ad3a174bcfb..86134a23cd4e 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-680.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-680.c
@@ -101,7 +101,6 @@
#define CSI2_RX_CFG0_DL2_INPUT_SEL 12
#define CSI2_RX_CFG0_DL3_INPUT_SEL 16
#define CSI2_RX_CFG0_PHY_NUM_SEL 20
-#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX 1
#define CSI2_RX_CFG0_PHY_TYPE_SEL 24
#define CSID_CSI2_RX_CFG1 0x204
diff --git a/drivers/media/platform/qcom/camss/camss-csid-gen3.c b/drivers/media/platform/qcom/camss/camss-csid-gen3.c
index 664245cf6eb0..f09b5575572a 100644
--- a/drivers/media/platform/qcom/camss/camss-csid-gen3.c
+++ b/drivers/media/platform/qcom/camss/camss-csid-gen3.c
@@ -103,7 +103,6 @@
#define CSID_RDI_IRQ_SUBSAMPLE_PERIOD(rdi) (csid_is_lite(csid) && IS_CSID_690(csid) ?\
(0x34C + 0x100 * (rdi)) :\
(0x54C + 0x100 * (rdi)))
-#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX 1
static void __csid_configure_rx(struct csid_device *csid,
struct csid_phy_config *phy, int vc)
diff --git a/drivers/media/platform/qcom/camss/camss-csid.h b/drivers/media/platform/qcom/camss/camss-csid.h
index aedc96ed84b2..b5ceb456a394 100644
--- a/drivers/media/platform/qcom/camss/camss-csid.h
+++ b/drivers/media/platform/qcom/camss/camss-csid.h
@@ -27,8 +27,11 @@
/* CSID hardware can demultiplex up to 4 outputs */
#define MSM_CSID_MAX_SRC_STREAMS 4
+/* CSIPHY to hardware PHY selector mapping */
+#define CSI2_RX_CFG0_PHY_SEL_BASE_IDX 1
#define CSID_RESET_TIMEOUT_MS 500
+
enum csid_testgen_mode {
CSID_PAYLOAD_MODE_DISABLED = 0,
CSID_PAYLOAD_MODE_INCREMENTING = 1,
@@ -154,7 +157,13 @@ struct csid_device {
void __iomem *base;
u32 irq;
char irq_name[30];
- u32 reg_update;
+ union {
+ u32 reg_update;
+ struct {
+ u32 rup_update;
+ u32 aup_update;
+ };
+ };
struct camss_clock *clock;
int nclocks;
struct regulator_bulk_data *supplies;
@@ -215,6 +224,7 @@ extern const struct csid_hw_ops csid_ops_4_1;
extern const struct csid_hw_ops csid_ops_4_7;
extern const struct csid_hw_ops csid_ops_340;
extern const struct csid_hw_ops csid_ops_680;
+extern const struct csid_hw_ops csid_ops_1080;
extern const struct csid_hw_ops csid_ops_gen2;
extern const struct csid_hw_ops csid_ops_gen3;
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 542122fba825..74a8ad3cb728 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -139,6 +139,84 @@ static const struct camss_subdev_resources csiphy_res_kaanapali[] = {
},
};
+static const struct camss_subdev_resources csid_res_kaanapali[] = {
+ /* CSID0 */
+ {
+ .regulators = {},
+ .clock = { "csid", "csid_csiphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid0" },
+ .interrupt = { "csid0" },
+ .csid = {
+ .is_lite = false,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_1080,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID1 */
+ {
+ .regulators = {},
+ .clock = { "csid", "csid_csiphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid1" },
+ .interrupt = { "csid1" },
+ .csid = {
+ .is_lite = false,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_1080,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID2 */
+ {
+ .regulators = {},
+ .clock = { "csid", "csid_csiphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid2" },
+ .interrupt = { "csid2" },
+ .csid = {
+ .is_lite = false,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_1080,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID_LITE0 */
+ {
+ .regulators = {},
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid_lite0" },
+ .interrupt = { "csid_lite0" },
+ .csid = {
+ .is_lite = true,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_1080,
+ .formats = &csid_formats_gen2
+ }
+ },
+ /* CSID_LITE1 */
+ {
+ .regulators = {},
+ .clock = { "vfe_lite_csid", "vfe_lite_cphy_rx" },
+ .clock_rate = { { 400000000, 480000000 },
+ { 400000000, 480000000 } },
+ .reg = { "csid_lite1" },
+ .interrupt = { "csid_lite1" },
+ .csid = {
+ .is_lite = true,
+ .parent_dev_ops = &vfe_parent_dev_ops,
+ .hw_ops = &csid_ops_1080,
+ .formats = &csid_formats_gen2
+ }
+ }
+};
+
static const struct resources_icc icc_res_kaanapali[] = {
/* Based on 4096 x 3072 30 FPS 2496 Mbps mode */
{
@@ -4414,9 +4492,11 @@ static const struct camss_resources kaanapali_resources = {
.version = CAMSS_KAANAPALI,
.pd_name = "top",
.csiphy_res = csiphy_res_kaanapali,
+ .csid_res = csid_res_kaanapali,
.icc_res = icc_res_kaanapali,
.icc_path_num = ARRAY_SIZE(icc_res_kaanapali),
.csiphy_num = ARRAY_SIZE(csiphy_res_kaanapali),
+ .csid_num = ARRAY_SIZE(csid_res_kaanapali),
};
static const struct camss_resources msm8916_resources = {
--
2.34.1
Powered by blists - more mailing lists